Author Topic: So.....what did you shoot today? (Read 767855 times - 13 votes)
)

RobertMcC · « **Reply #5020 on:** April 22, 2019, 05:05:58 PM »

YAY somewhat of a zero @ 20M. Scope lens still fogging up. Might pick up some rain x anti fog.

Rat Sniper (AKA: PaulT58) · « **Reply #5021 on:** April 22, 2019, 05:51:40 PM »

Nothing today! Getting my fence repaired, so have had workers crossing back and forth in front of my backyard range all day! Kinda like those ducks at the shooting arcade at the County Fair! Hmmm... Nah, better not.

Hoosier Daddy · « **Reply #5022 on:** April 22, 2019, 09:25:23 PM »

Weather was SO nice... my after work plans changed... I mowed. $:-\$

Back_Roads · « **Reply #5023 on:** April 22, 2019, 09:30:20 PM »

I got off a tractor and came to the conclusion that I was shooting the moon

Brand New pair of pants let out full crotch, TG for a roll of Gorilla tape, BTW that stuff seems to stick from both sides

My day aint over I will defiantly" go shoot something else.

bReTt · « **Reply #5024 on:** April 22, 2019, 09:54:19 PM »

I roasted some coffee beans then I made a cup while Christopher and Sean enjoyed shooting “Art”.

Artemis PP700SA.177

bear air · « **Reply #5025 on:** April 22, 2019, 10:49:14 PM »

Popped a squirrel in the yard this morning with the armada then later today ran 4 mags through the marauder in my indoor 13 yard range. I sighted it in yesterday at 28 yards and at 13 yards poi is exactly 1 mildot low. That's easy enough to remember. This new barrel stacks pellets.

Wayne52 · « **Reply #5026 on:** April 23, 2019, 09:44:18 AM »

I did 25 shots early this AM with my Crosman 150 using my 19.6 grain "Hunters"

Matchstickshooter · « **Reply #5027 on:** April 23, 2019, 02:36:23 PM »

Crosman 22 carbine again!!

maraudinglizard · « **Reply #5028 on:** April 23, 2019, 03:05:02 PM »

Sig X5 arrived today, 4 carts and a little over 300 pellets. It's just little bit pellet picky but that is expected being new.

Matchstickshooter · « **Reply #5029 on:** April 23, 2019, 05:19:33 PM »

Just shot dirt clods in the garden with 1740 long rifle!

Wayne52 · « **Reply #5030 on:** April 23, 2019, 05:51:42 PM »

Quote from: maraudinglizard on April 23, 2019, 03:05:02 PM

Sig X5 arrived today, 4 carts and a little over 300 pellets. It's just little bit pellet picky but that is expected being new.

My Sig M17 loves the wadcutters !

bantam5s · « **Reply #5031 on:** April 23, 2019, 06:47:40 PM »

Picked up a Beeman p17 today and have been plinking with it.
This is definitely not a gun I want to be shooting for hours at a time, it sure is rough on the hands to operate this pistol.
Maybe wearing some fingerless gloves will solve this.

I definitely love how it's correct handed, finally an air pistol made for us lefties.
Well this and the 13xx.

avator · « **Reply #5032 on:** April 23, 2019, 06:50:29 PM »

Quote from: bantam5s on April 23, 2019, 06:47:40 PM

Picked up a Beeman p17 today and have been plinking with it.
This is definitely not a gun I want to be shooting for hours at a time, it sure is rough on the hands to operate this pistol.
Maybe wearing some fingerless gloves will solve this.

Man up butterfly..... lol
I hear ya, I have fingerless gloves with padded palms left over from the Harley, they work great. On the other hand, Betty Lou loves her p-17.

maraudinglizard · « **Reply #5033 on:** April 23, 2019, 06:57:38 PM »

Quote from: Wayne52 on April 23, 2019, 05:51:42 PM

Quote from: maraudinglizard on April 23, 2019, 03:05:02 PM
Sig X5 arrived today, 4 carts and a little over 300 pellets. It's just little bit pellet picky but that is expected being new.
My Sig M17 loves the wadcutters !

My MCX does well with the RWS wadcutters. I didn't have much of a selection with me so I made the best of what I had. I had a good group with it once I got the sights where I wanted them. I will eventually put a dot scope on it. It has met my expectations so far just got to spend time getting to know it better.

Insanity · « **Reply #5034 on:** April 23, 2019, 07:54:18 PM »

Quote from: bantam5s on April 23, 2019, 06:47:40 PM

Picked up a Beeman p17 today and have been plinking with it.
This is definitely not a gun I want to be shooting for hours at a time, it sure is rough on the hands to operate this pistol.
Maybe wearing some fingerless gloves will solve this.

I definitely love how it's correct handed, finally an air pistol made for us lefties.
Well this and the 13xx.

When I get some time I plan on designing and 3d printing a cocking aid for the p17.

bantam5s · « **Reply #5035 on:** April 23, 2019, 08:00:37 PM »

Quote from: Insanity on April 23, 2019, 07:54:18 PM

Quote from: bantam5s on April 23, 2019, 06:47:40 PM
Picked up a Beeman p17 today and have been plinking with it.
This is definitely not a gun I want to be shooting for hours at a time, it sure is rough on the hands to operate this pistol.
Maybe wearing some fingerless gloves will solve this.

I definitely love how it's correct handed, finally an air pistol made for us lefties.
Well this and the 13xx.

When I get some time I plan on designing and 3d printing a cocking aid for the p17.

The narrow 3/8 rail is the most uncomfortable thing on my hand, id like to see a cover that's the width of the gun.
I may hot glue something to the top of the gun, something I can easily remove if needed.

Insanity · « **Reply #5036 on:** April 23, 2019, 08:08:49 PM »

There is one that already exists like that. I am planing on making something that hangs off the back for more leverage but would require modding the gun itself.

https://www.thingiverse.com/thing:2481920

bantam5s · « **Reply #5037 on:** April 23, 2019, 08:50:42 PM »

Quote from: Insanity on April 23, 2019, 08:08:49 PM

There is one that already exists like that. I am planing on making something that hangs off the back for more leverage but would require modding the gun itself.

https://www.thingiverse.com/thing:2481920

The added leverage definitely sounds like a real plus, as long as you have a steel rod running through it.

That one you posted a link to does look like something I can basically made from a piece of 1x2.

Insanity · « **Reply #5038 on:** April 23, 2019, 08:59:44 PM »

Quote from: bantam5s on April 23, 2019, 08:50:42 PM

Quote from: Insanity on April 23, 2019, 08:08:49 PM
There is one that already exists like that. I am planing on making something that hangs off the back for more leverage but would require modding the gun itself.

https://www.thingiverse.com/thing:2481920
The added leverage definitely sounds like a real plus, as long as you have a steel rod running through it.

That one you posted a link to does look like something I can basically made from a piece of 1x2.

I will be using some steel bars attached to the top bit and a block for your hand to use as a lever and if you can make one out of wood do it but maybe use some 2x3.

Arch_E · « **Reply #5039 on:** April 23, 2019, 09:26:59 PM »

Quote from: Insanity on April 23, 2019, 07:54:18 PM

Quote from: bantam5s on April 23, 2019, 06:47:40 PM
Picked up a Beeman p17 ....

When I get some time I plan on designing and 3d printing a cocking aid for the p17.

Okay, this sounds interesting. I definitely want to hear more about this.

Archie

Thank you to our advertisers!

So.....what did you shoot today?

Author Topic: So.....what did you shoot today? (Read 767855 times - 13 votes) )

Author Topic: So.....what did you shoot today? (Read 767855 times - 13 votes)
)