NOTOS arrived

[2A Georgia]

I just wanted to say i hope you guys are real proud of yourselves... because of this forum and this post i took the dive today and bought my first PCP gun. I did go ahead with the Notos after a day or two of back and forth between that and the hatsan Jet 2. I am super excited, now i just have to wait for BUds gunshop to ship my goodies!!! I also bought a compressor off of amazon, that bicycle pump looks like it might be a reason to not take so many shots, and who needs stuff like that in their life. I have plenty of pellets to get me started, but can you think of anything else i will need in order to start shooting the day the Notos arrives?

the compressor i got on amazon is titled...
Portable pcp air compressor 4500psi 300bar 12v DC or 110v AC with power supply,oil&water free,high pressure PCP Compressor Pump for Air Gun and Paintball/Scuba Tank

...and it is sold by orcair  if you have any advice about that id love to hear it also

Welcome to the rabbit hole.  You could shoot the Notos one ragged hole 30 yards and in with cheapy value priced CPHPs or rabbit hole #2 lol.  James is correct a sighting device of your choice.
IMHO the Notos is a deadly accurate sub 40 yard AG and a 3-9 or 2-7 scope should be adequate.  If you're going to just hunt a 4X fixed or super light red dot is all you need again IMHO YMMV.....

[Back_Roads]

 Medium mounts work for most, I am running a 3-9 x 32 to keep it light and not top heavy.

[avator]

Look into the Maple Custom Products high capacity mags.

https://maplecustomproducts.com/products/umarex-notos-artemis-spa-snowpeak-smk-pp750-mega-cap-magazine

[tennx]

Im certainly a fan….Ive not done anything to mine except extended moderator and Im not really sure it was needed ….over scoped it…..rested shoots quarter size holes all day @ 30 yards..because of surgery on my neck to remove lymph node I had to use medium rings and .5 riser to get proper sight picture…..I just dont see how it gets any better…lol..good luck

[avator]

I ordered the Buck Rail hand guard to cover that nekid tube on the gun. It will also take M-Lok accessories like a flash light or bipod.

[2A Georgia]

I ordered the Buck Rail hand guard to cover that nekid tube on the gun. It will also take M-Lok accessories like a flash light or bipod.

Freezes my hand in December and January....M-Lok with a bipod sounds tempting.  I like shooting prone, but there's always some undergrowth in the way when hunting.  I can see bipod on table on target days with the plinking buddies...
I was considering the camo tape, got till August to decide...

[tennx]

Here is another choice ……for u folks consideration…..good luck

https://www.ebay.com/itm/176223993556?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=Li7AQAeUTlW&sssrc=4429486&ssuid=_70jmZuBS5m&var=&widget_ver=artemis&media=COPY

[avator]

I have a 3" pica rail to add to it.

[kbstingwing]

Bought a Notos from Natches the other day, it came quick, already did the drop block, gonna do my bottle upgrade and put a 3L carbon tank with 2800 psi regulator on it, looks like they changed the trigger, no back trigger adjustment screw, I added one from my junk drawer, just for better feel, this is gonna be a gift for my Brother, he has been a great help handling all the affairs when my Dad past away, he didn't want anything from the estate, so I am giving him this, He liked Mine so much, I figured this will make him happy. 

[PasadenaMike]

Bought a Notos from Natches the other day, it came quick, already did the drop block, gonna do my bottle upgrade and put a 3L carbon tank with 2800 psi regulator on it, looks like they changed the trigger, no back trigger adjustment screw, I added one from my junk drawer, just for better feel, this is gonna be a gift for my Brother, he has been a great help handling all the affairs when my Dad past away, he didn't want anything from the estate, so I am giving him this, He liked Mine so much, I figured this will make him happy. 

Really? No adjustment screw? Guess they really don’t want people adjusting them.

[kbstingwing]

Bought a Notos from Natches the other day, it came quick, already did the drop block, gonna do my bottle upgrade and put a 3L carbon tank with 2800 psi regulator on it, looks like they changed the trigger, no back trigger adjustment screw, I added one from my junk drawer, just for better feel, this is gonna be a gift for my Brother, he has been a great help handling all the affairs when my Dad past away, he didn't want anything from the estate, so I am giving him this, He liked Mine so much, I figured this will make him happy. 

Really? No adjustment screw? Guess they really don’t want people adjusting them.

just the front screw, I guess they thought it didn't need the back one since everyone was filing it down to smooth it out. 
the Bottle and Regulator should be here today, I'll do a little test firing and leak test before I send it to my brother.

[avator]

I haven't shot my NoDoze in a few days. I'm waiting the M-Lok fore grip to arrive from Buck Rail. I'd like to find an angled Magpul type grip for it but they seem to think they are made of gold or something.
Betty Lou wanted some keyed alike cabinet locks to lock up guns and ammo so I added some M-Lok screws and nuts for adding the picca rail and other accessories if I choose to.

[kbstingwing]

I haven't shot my NoDoze in a few days. I'm waiting the M-Lok fore grip to arrive from Buck Rail. I'd like to find an angled Magpul type grip for it but they seem to think they are made of gold or something.
Betty Lou wanted some keyed alike cabinet locks to lock up guns and ammo so I added some M-Lok screws and nuts for adding the picca rail and other accessories if I choose to.

I just bought 3 of these AR Stoner grips from Midway for $3.99 ea
https://www.midwayusa.com/product/1017650559?pid=104558

[tennx]

I haven't shot my NoDoze in a few days. I'm waiting the M-Lok fore grip to arrive from Buck Rail. I'd like to find an angled Magpul type grip for it but they seem to think they are made of gold or something.
Betty Lou wanted some keyed alike cabinet locks to lock up guns and ammo so I added some M-Lok screws and nuts for adding the picca rail and other accessories if I choose to.

I have several of these on lego guns….maybe too bulky for your needs…good luck

https://www.wltactical.com/products/tactical-push-on-qr-vertical-forward-folding-foregrip-grip-for-picatinny-rails

[avator]

I haven't shot my NoDoze in a few days. I'm waiting the M-Lok fore grip to arrive from Buck Rail. I'd like to find an angled Magpul type grip for it but they seem to think they are made of gold or something.
Betty Lou wanted some keyed alike cabinet locks to lock up guns and ammo so I added some M-Lok screws and nuts for adding the picca rail and other accessories if I choose to.

I have several of these on lego guns….maybe too bulky for your needs…good luck

https://www.wltactical.com/products/tactical-push-on-qr-vertical-forward-folding-foregrip-grip-for-picatinny-rails

That looks like it might be an option.

[tennx]

I haven't shot my NoDoze in a few days. I'm waiting the M-Lok fore grip to arrive from Buck Rail. I'd like to find an angled Magpul type grip for it but they seem to think they are made of gold or something.
Betty Lou wanted some keyed alike cabinet locks to lock up guns and ammo so I added some M-Lok screws and nuts for adding the picca rail and other accessories if I choose to.

I have several of these on lego guns….maybe too bulky for your needs…good luck

https://www.wltactical.com/products/tactical-push-on-qr-vertical-forward-folding-foregrip-grip-for-picatinny-rails

That looks like it might be an option.

My bad…That link was for example…out of stock ..but their all over the net and cheaper…good luck

[avator]

I'll keep looking, thanks

[avator]

The Buck Rail M-Lok fore grip came in this morning. It changes the look and feel of the gun. I like it alot.
The M-Lok screws will be here tomorrow and I can add the 3" section of picca rail to it.

[tennx]

Certainly completes the gun…Not sure I like the foregrip…but really like the hand rail…Im not sure it needed the baffle extender but gun is whisper quiet….certainly one of my favorite shooter…...many thanks

[avator]

The fore grip adds some thickness to the front of the gun. The stock tube just felt thin and cold. After adding the fore grip I'm not even sure I need the angled grip I was looking for. The M-Lok screws are due to arrive tomorrow so I can add the picca rail. I have a flashlight mount and a bipod for accessory options.