Aircudas long term field testing

[Nomadic Pirate]

I am just stoked that the shrouds are the same measures of Evanix shrouds, so I can use my battery of LDC

[Spacebus]

First of all Motorheads pic is not of a silencer its a baffle stack and shroud it cannot be unscrewed and put on a powder burner theres the main difference. If it was a silencer that was threaded and was shown disassembled we would pull it down. Scott knows the rules. Back on topic please

Thanks for the clarification!

[Nomadic Pirate]

How about a TRIGGER internals view 
It is a modular unit that simply unscrews from lower tubes hammer housing.

Bottom side of action ... Robusto !! Receiver being held down to lower main tube with no less than 7 fasteners !!!

Yeah when I took the stock off yesterday I was impressed by the amount of hardware under there

[Mr.P]

How about a TRIGGER internals view 
It is a modular unit that simply unscrews from lower tubes hammer housing.

Bottom side of action ... Robusto !! Receiver being held down to lower main tube with no less than 7 fasteners !!!

That approach to the trigger group - like a cassette- is interesting. First I’ve seen like that. 

[Mr.P]

First of all Motorheads pic is not of a silencer its a baffle stack and shroud it cannot be unscrewed and put on a powder burner theres the main difference. If it was a silencer that was threaded and was shown disassembled we would pull it down. Scott knows the rules. Back on topic please

Thanks for the clarification!

So we can discuss shroud baffles and designs for shroud inserts no problem, just not screw-on cans?  This is good news because I have been holding back on related posts thinking the ban applied to any sound moderation at all. 

[Spacebus]

How about a TRIGGER internals view 
It is a modular unit that simply unscrews from lower tubes hammer housing.

Bottom side of action ... Robusto !! Receiver being held down to lower main tube with no less than 7 fasteners !!!

That approach to the trigger group - like a cassette- is interesting. First I’ve seen like that.

I think the Crosman/Benjamin PCP's, some CO2 guns, and the new 362 use a trigger group with its own housing. I only know this because I bought a c362 right after they started shipping.

[avator]

First of all Motorheads pic is not of a silencer its a baffle stack and shroud it cannot be unscrewed and put on a powder burner theres the main difference. If it was a silencer that was threaded and was shown disassembled we would pull it down. Scott knows the rules. Back on topic please

Thanks for the clarification!

So we can discuss shroud baffles and designs for shroud inserts no problem, just not screw-on cans?  This is good news because I have been holding back on related posts thinking the ban applied to any sound moderation at all.

Oh boy !!!! Katy bar the door !!     

[Lani52]

That standard is a nice looking “classic style rifle”. 

Something rare these days, for me the majority of airguns look like the were designed by a 12 year old Clinton who has been sniffing anti-matter.

Regards,

Roachcreek

[Motorhead]

This will likely get posted again in a proprietary JTS AIRCUDA  thread sometime in the future ... But, How much power without going nuts can we extract from a .25cal Aircuda MAX
With an @ 12 gram brass hammer weight ( 23.5G factory weight + 12 = 35.5G ) reg raised up to @ 155bar were making 50 fpe ! sending a JSB king @ 942 fps maxed out.
JSB heavy @ 832 to 52+ ft lbs.

Kind of an air hog set as such, but if wanting a Regulated "Hunter" there ya go.

Scott

[oldpro]

 Not to shabby for a carbine!

[Outer_Rondacker]

Just wanted to say sorry for bringing up the LDC. Something told me not to ask. I joined this forum and read pages of rules. I must of missed the one saying you cannot talk about suppressors as that is what they are not silencers. Powder burners use a different thread pattern just so you guys know.

So, the BAFFEL set up. Is it enough or does it need a Lead Dust Container? I would ask another question, but I have learned my lesson.

[Nomadic Pirate]

Chrono day,

keep in mind the gun didn't have that many rounds through and still needs to be truly broken in.

gun is untouched.

Starting at 200 BAR ending at 140 BAR

 with the 28gr Benjamin pellets


758
762
765
770
779
782
789
787
796
805


800
813
814
827
817
827
831
830
834
838


854
856
852
854
854
850
850
847
843
843

840
831
831
827
821
815
808
807
797
785

Peek power 45 FPE but you can see it can take a lot more spring to get the power up and the curve higher.


Granted my range is only 17 yards but all 40 rounds where inside a dime

[Nomadic Pirate]

This will likely get posted again in a proprietary JTS AIRCUDA  thread sometime in the future ... But, How much power without going nuts can we extract from a .25cal Aircuda MAX
With an @ 12 gram brass hammer weight ( 23.5G factory weight + 12 = 35.5G ) reg raised up to @ 155bar were making 50 fpe ! sending a JSB king @ 942 fps maxed out.
JSB heavy @ 832 to 52+ ft lbs.

Kind of an air hog set as such, but if wanting a Regulated "Hunter" there ya go.

Scott

That is very good for a regulated gun with that short of a barrel

[Nomadic Pirate]

Next up is the MAX,

Again bare in mind this guns are nowhere near broken in

Benjamin 28gr starting at 200 BAR and getting of the regulator at 140ish BAR

806
832
839
832
834
839
835
839
835
837

829
839
834
831
835
836
833
836
841
836

837
846
835
840
837
865
838
833
842
828......it sounded totally different so I think it went off the regulator, and the next 2 shots where 821, 815 so I stopped.


I know nothing about regulated guns but it looks pretty good to me for a gun with very few round down the barrel


3 mags around 43 FPE, not bad IMO

[oldpro]

 You can fill the max to 3500psi Manny not sure if I told you that

[Outer_Rondacker]

So it looks like 10 shots per fill with the .25 cal?

[oldpro]

So it looks like 10 shots per fill with the .25 cal?

Around 35/40 when you tune it depending on power etc. Matt look up tuning for a bell curve with the search engine that should help you out.

[Outer_Rondacker]

So it looks like 10 shots per fill with the .25 cal?

Around 35/40 when you tune it depending on power etc.

So you are testing two also? What cal do you have?

[Nomadic Pirate]

So it looks like 10 shots per fill with the .25 cal?

Much depend on what power you want to tune, I will try tune her pretty hot and get 20 shots from 200 BAR to 100 BAR ,.....but will see how that goes

[Richard3589]

Chrono day,

keep in mind the gun didn't have that many rounds through and still needs to be truly broken in.

gun is untouched.

Starting at 200 BAR ending at 140 BAR

 with the 28gr Benjamin pellets


758
762
765
770
779
782
789
787
796
805


800
813
814
827
817
827
831
830
834
838


854
856
852
854
854
850
850
847
843
843

840
831
831
827
821
815
808
807
797
785

Peek power 45 FPE but you can see it can take a lot more spring to get the power up and the curve higher.


Granted my range is only 17 yards but all 40 rounds where inside a dime

I'm guessing the shot count started at 758 and just got better as it emptied?
 I bet a 25.4 will shoot wonderful out of this gun from those numbers? Heck, even a 31-33 gr will be solid.