What airgun related did you do today?

[DIYengineer235]

Very nice matt. Did you make the front sight to take any particular standard insert ?

Not really, but the OD on the insert is 17mm. Because 3D printing just has some inherent design limitations for stuff this small, I couldn't really go with a standard design. At least, I didn't copy a design as far as I know.

[Blowpipe Sam]

I made a shim out of a small brass hex nut and installed it under the barrel wedge spring in my .22 cal Hatsan mod 125.  This increased the preload on the spring by about 3/16 of an inch.  Just enough to restore good barrel lockup.  I'll order a replacement from Hatsan but I like to wait and order when I need several parts.

[avator]

Fixed the slow leak in my .177 Gauntlet.

[Back_Roads]

 Inbreeding 2 Beeman guns I have the action from a Beeman Bison and the stock from a Beeman 1085, been cutting and sanding etc. a bit more to go, but everything is looking promising. Just need to come up with longer stock  bolts, and a trigger guard. But sone final shaping is required yet too. Hmm just came up with a name, BI-1085 

[jackinil]

Got a Crosman Icon with a 20% off code a while ago. Leaked air badly and should have sent it back but didn't. Replaced the o-rings and it now holds air. Added some Buck Rail parts,part of the old stock and a cheap AO 4X scope I had and shot some RWS Superdomes at 10 yards in the basement. It's a workout with a handpump but I can handle it. It's my cheap foray into PCPs. This Sunday is supposed to be 50 degrees so maybe try it at 20 yards in the backyard.

[Hoosier Daddy]

Inbreeding 2 Beeman guns I have the action from a Beeman Bison and the stock from a Beeman 1085, been cutting and sanding etc. a bit more to go, but everything is looking promising. Just need to come up with longer stock  bolts, and a trigger guard. But sone final shaping is required yet too. Hmm just came up with a name, BI-1085 

The silver action from your Beeman Bison looks familiar.
When I googled it, even the muzzle brake looks like my aged Silver Kodiak.
Did it come with a .77 and a .22 barrel?

[Back_Roads]

 Yes it did the .22 barrel is on an 880 Daisy ATM. Yes they did use that action on many variations. Supposedly the barrel setup will cross over to the Bear River Black Ops Sniper Rifle also, so one could have it in dual cal.

[Hoosier Daddy]

That is what I thought...
Now that I have found the pellet each barrel prefers..
I'm good. 

[Back_Roads]

That is what I thought...
Now that I have found the pellet each barrel prefers..
I'm good. 

 Like that winter camo !!!

[avator]

The RS2 barrels and blocks are a drop in as well.

[singleshotcajun]

That is what I thought...
Now that I have found the pellet each barrel prefers..
I'm good. 

Very nice Scott. Maybe it's my French ancestry but I see Grape vines.

[singleshotcajun]

Yesterday,after work  I broke out the chrony and shot the new Daisy 25 and  DAR gen 3 .22 over it. For some reason it would not 'talk" to my iPad but.............. average of 301 for the model 25 bb and 931 for the DAR Gen 3 with CPHP .22. Looks like about 40 shots at the speed for the DAR as set from factory. I may back off the striker at some point but for now really happy with it out of the box and a little tweaking on the trigger.

[Kragman1]

Smoked 5 bacons plus sausages for lunch while shooting an 1100s and an R9 with my foster brother.  Good times!

[Hoosier Daddy]

Took a long hard look at my arsenal... does one man NEED 30+ air guns?
Problem is, as always, which ones to part with.
 
Then I work in reverse order... Definite Keepers down to "is it really necessary".
 I always think I'll never get a chance to get another for what I got this one for.

[singleshotcajun]

Took a long hard look at my arsenal... does one man NEED 30+ air guns?
Problem is, as always, which ones to part with.
 
Then I work in reverse order... Definite Keepers down to "is it really necessary".
 I always think I'll never get a chance to get another for what I got this one for.

Brother, for me it quit being about need (both AG and PB ) a long time ago. Some things just makes me happy.

[Insanity]

At least the dozer is in a loving home.

[DIYengineer235]

Made a slight change the rear sights I designed for my Fusion 2 and it managed to warm up enough to go out and test them. First shot landed right on the 9 ring. 4 more got me a quarter sized group above and right. Made some adjustments and the next 4 landed right on the bullseye. Forgot to take a picture of that, but here are the targets from after that.

[Hoosier Daddy]

At least the dozer is in a loving home.

How is the Mendoza treating you Matt?
 THAT is a prime example of "seller's remorse". 
Calling "dibbs" to get her back if you ever want.

[Ronno6]

Disassembled, cleaned and resealed a V1 Crosman 2200, but needs some significant butt stock repair.

Received a Crosman 2100W. Not too bad but the piston cup needed to be replaced as the forearm would droop after a few minutes.
Pump cup leaking... Nice gun...

[Insanity]

At least the dozer is in a loving home.

How is the Mendoza treating you Matt?
 THAT is a prime example of "seller's remorse". 
Calling "dibbs" to get her back if you ever want.

It's the only springer I like to shoot.