What airgun related did you do today?

[Blowpipe Sam]

Boxed up a Ruger AHEII stock and some rings to send to Ron.  Worked on removing a broken forearm screw from a B-19.  I dulled a couple of mild steel drill bits creating a little dimple.  Gonna have to invest in a Tungsten bit to get through this one.  I may just swap barrels with another B-19 as the easiest solution.

[BanjomanMI76]

I gave a squirrel a little chin music. He jumped when he recognized the tune and ran 25 feet before sitting down forever.

[Bayman]

Broke down my favorite air rifle and carefully fit it in a small box. Then loaded it and million other things in my truck for my move to Arkansas.

[bReTt]

Broke down my favorite air rifle and carefully fit it in a small box. Then loaded it and million other things in my truck for my move to Arkansas.

Safe travels 🛻🪕

[Jshooter71]

Broke down my favorite air rifle and carefully fit it in a small box. Then loaded it and million other things in my truck for my move to Arkansas.

Safe travels 🛻🪕

👍👍 Two thumbs up!!!

[Hoosier Daddy]

Godspeed Ron!

[cjtamu]

Broke down my favorite air rifle and carefully fit it in a small box. Then loaded it and million other things in my truck for my move to Arkansas.

Let us know when you get there. Looking forward to seeing what you do up there.

[bear air]

I took the monstrum G1 3x9x40 frps scope off my rifle and boxed it all up and got it all wrapped up addressed and in the mail heading back to monstrum. That model seems to be prone to parallax issues. This was the exchanged one from the initial purchase. I requested a lpvo for replacement in the same price point.

[Back_Roads]

 Started taking Twisted Sister apart to fix a TP leak, then noticed I had a flow through bolt laying in a parts dish, I think I was going to put it in the 2240xl stubby but forgot, so I decided I better go do yard work till the rain started, then ran errands, and came home to no rain  so back to yard work.
 I will dig into them later so I can have my stubbys back 

[avator]

Yeah, I thought I felt a leak when I shot it before I sent it. I hadn't shot it much in the past year or so but I don't remember it having a leak before. Maybe just a dried out seal.
The small breech screw was tight, right?

[Back_Roads]

Yeah, I thought I felt a leak when I shot it before I sent it. I hadn't shot it much in the past year or so but I don't remember it having a leak before. Maybe just a dried out seal.
The small breech screw was tight, right?

Yes it was to the point I was just able to extract it, even with a clamp on, replaced with a Magnum Air Screw, and sealed up gootntight

[avator]

Good deal... so, leak fixed.

[Spacebus]

Recovered three more squirrels, but one got away after taking two 177 slugs. These little creatures are incredible.

[Spacebus]

Yeah, I thought I felt a leak when I shot it before I sent it. I hadn't shot it much in the past year or so but I don't remember it having a leak before. Maybe just a dried out seal.
The small breech screw was tight, right?

Yes it was to the point I was just able to extract it, even with a clamp on, replaced with a Magnum Air Screw, and sealed up gootntight

Good ol' German torque specs.

[JuryRigger]

Cleared a short lane in what will become my new shooting area-6 foot high straight up-and-down creek bank, topped with another 14 foot or so of hill rising pretty steep above that... Plus, I'm shooting down into it...
Not going to have more than 20 yards at best/if that, but I'll not have to wait or worry at all-shoot whatever, whenever... 
Just need to do some more clearing, and build a wooden target backer/backstop to avoid the rocks in the bank...
Jesse

[Rick67]

Yeah, I thought I felt a leak when I shot it before I sent it. I hadn't shot it much in the past year or so but I don't remember it having a leak before. Maybe just a dried out seal.
The small breech screw was tight, right?

Yes it was to the point I was just able to extract it, even with a clamp on, replaced with a Magnum Air Screw, and sealed up gootntight

That MAP torx breech screw is really the real deal.

Super hard and won't stip.

[2A Georgia]

Started on the sear for the AEA30.
Might be next week to complete.

[avator]

Yeah, I thought I felt a leak when I shot it before I sent it. I hadn't shot it much in the past year or so but I don't remember it having a leak before. Maybe just a dried out seal.
The small breech screw was tight, right?

Yes it was to the point I was just able to extract it, even with a clamp on, replaced with a Magnum Air Screw, and sealed up gootntight

That MAP torx breech screw is really the real deal.

Super hard and won't stip.

Yes, I'm surprised to hear that Twisted Sister did not have one because that's normally what I use.

[avator]

Today's tinkerings....
Lots of squirrel activity lately has me coming my shooting options to come uiip with a short to mid range option. It must remain at the ready, accurate, able to contain projectiles within our boundries because the expected angles of the shots and it needs to be light weight and easy to weild. I also want some of the fun factor.
Air Master Max just might fit the bill. This is my CP1/CP2/PP800 conversion gun.
As it sits, it's LOUD. The barrel is short... not much room to add anything to quiet it down.... I know, I know, I've often said that I like em loud. But if I want to get a shot at critter 2 or 3 I need it to be somewhat quite.
So I think I'm gonna scare up a full length .177 barrel (I know I have a couple around) and cut/crown it just long enough to add something to the end yet maintain compactness.
I'm also going to fit it with the ATN X Sight HD scope (that's where the FUN comes in) for some night shooting on the nocturnal critters and some video.
Here is a mock up before the extended barrel and silencer.

[avator]

Oh, I can heaar y'all now... "Man, that scope sits high".
To that I ask... ever use one of these scopes? It ain't nothing about cheek weld. The eye piece actuall becomes part of your face. It's more like "eye weld", if you will. Think about binoculars or a telescope, where's the cheek weld? Ain't none. Matter of fact... I want as little as possible.