Author Topic: .25 cal 34-38 gr. Pellet Mould at NOE - In the Store (Read 41766 times - 2 votes)
)

comemeer · « **Reply #40 on:** May 14, 2018, 10:45:09 AM »

I wanted to get in on this but I'm having trouble signing up with the NOE forum. I'm not getting the email activation code for verification. Tried signing up last night... how long should it take? Checked my spam folder but nothing there either.

comemeer · « **Reply #41 on:** May 14, 2018, 11:06:52 AM »

I just got it...nevermind.

Rob in NC · « **Reply #42 on:** May 23, 2018, 11:07:46 AM »

Got the PM today that these are ready for order.
Thanks to all who were involved.

KnifeMaker · « **Reply #43 on:** May 23, 2018, 11:11:13 AM »

Hi Ya Rob!

Sure am keeping my fingers crossed that the can produce accurate pellets.
will be picking mine up first of the month.

Knife

rsterne · « **Reply #44 on:** May 23, 2018, 11:18:27 AM »

These moulds are now available.... http://noebulletmolds.com/NV/index.php?cPath=374_376_483

If you participated in the Group Buy, you should get your Discount Code shortly via PM....

Bob

Rob in NC · « **Reply #45 on:** May 23, 2018, 12:11:54 PM »

Knife... I'll have a limited airsenal to test them with.... I had originally wanted them for my Condor, but I've been talked into going .257 on it so we'll see. I may throw a .25 barrel on another AF gun, but not sure just yet.
As it stands, looks like I'll be testing these out of a modified M10 and a Priest.

tkerrigan · « **Reply #46 on:** May 23, 2018, 12:58:06 PM »

I've read that some people have had good luck shooting .25 pellets in .257 rifles. The skirt will seal just fine. Regards, Tom

Rob in NC · « **Reply #47 on:** May 23, 2018, 01:35:41 PM »

I have read the same and so I will be giving it a go, of course... might end up being surprised!

Wayne52 · « **Reply #48 on:** May 23, 2018, 02:07:19 PM »

My brass 4 cavity will be here within 2-5 days

KnifeMaker · « **Reply #49 on:** May 23, 2018, 04:54:09 PM »

Rob, I swore that it wouldn't work, but my .257 barrel is a little tight, and to my surprise, the .25's shoot very well thru it!

I have a very accurate .25 barrel here that is fluted. and is a lot longer thant he Rainstorm. Wonder how it would do with bullets. Or maybe a TJ bbl. for the RS in .25.

Got my code Bob!

Thanks, Knife

K.O. · « **Reply #50 on:** May 23, 2018, 06:25:50 PM »

got my 2 cavity brass and a few more sizing inserts on the way...

But there are no .248 inserts for the .25 could have sworn different...(Knifemaker impression time)... Grrr

... (sorry cooouldn't resist Michael)

wanted to try to size under and knurl back up from there just to see what I would get with the BBT...oh well...

Have a good feeling about this pellet...

Mada · « **Reply #51 on:** May 23, 2018, 07:47:20 PM »

Noe has .248 body sizing die under .243 cal

K.O. · « **Reply #52 on:** May 23, 2018, 10:46:20 PM »

Thanks did not think to look there... I would have to get the .243 push rod most likely... I will probably just wait till the new .223-38-RN hopefully... It just needs 3 more ... so it might be sooner than later.

HunterWhite · « **Reply #53 on:** May 23, 2018, 11:04:58 PM »

Hey Rob in NC, did you coin a word. Or was this a typo?
" I'll have a limited airsenal to test them with.... "

Airsenal, I like it.

Nomadic Pirate · « **Reply #54 on:** May 23, 2018, 11:35:03 PM »

"Airsenal"......been around for quite some times :")

Rob in NC · « **Reply #55 on:** May 24, 2018, 12:11:16 AM »

Yes, sir... would love to take credit for that one, but I cannot. I've seen it around the forums for many years.

I'm not sure how quickly they ship, but would be great to get them in for the weekend. I'm off Friday and would love to inhale some lead fumes.

Nomadic Pirate · « **Reply #56 on:** May 24, 2018, 02:18:24 AM »

Just placed the order for the .25 pellet Mould and at the same time the .30 pellet mould.

Those will go in the box with my 52gr BBT .25 mould awaiting the day that I will start casting

Wayne52 · « **Reply #57 on:** May 26, 2018, 08:29:48 AM »

Well I just recently got a USPS tracking number so it will probably be 2-5 days now.

Bob Pratl · « **Reply #58 on:** May 26, 2018, 08:35:41 AM »

I just got my Tracking number as well.

Wayne52 · « **Reply #59 on:** May 26, 2018, 01:22:40 PM »

Bob Pratl I see you got the 4 cavity aluminum I got the brass one.

Thank you to our advertisers!

.25 cal 34-38 gr. Pellet Mould at NOE - In the Store

Author Topic: .25 cal 34-38 gr. Pellet Mould at NOE - In the Store (Read 41766 times - 2 votes) )

Nomadic Pirate

Nomadic Pirate

Author Topic: .25 cal 34-38 gr. Pellet Mould at NOE - In the Store (Read 41766 times - 2 votes)
)