So.....what did you shoot today?

[Zsigmund]

 Gamo CFX

[brewbear]

I have the Ebay sizers in .25 and .22. They do a good job.
Seems like everything NOE sells is out of stock. I mean EVERYTHING, not just sizers. Looks like they cater to PB reloaders.

Bill, do you happen to remember the seller for the sizers? Thanks

Sho nuff...

https://www.ebay.com/shop/pellet-sizers?_nkw=pellet+sizers

Thank you for that. Now, in your estimation, do you think these sizers can be used to size down from a .22 pellet to a .20 pellet?
I think James has a .20 sizer, maybe he will chime in? Thank you.

[Frank in Fairfield]

Offhand Practice….

#1-IZH60-Open Sights-10 Shots
#2-2300S-Open Sights-30 Shots
#3-C9a-Peep Sights-10 Shots
#4-HW35-Peep Sights-10 Shots
#5-R1-4X Hawke-10 Shots

[buellm2]

My new to me HW 35.   It needs some work.  The front sight is incorrect and way too tall.   Pellet speed is low enough so I can see the loopy trajectory.  It's a 1968 and the leather seal isn't sealing very well.   The breech seal also clearly needs replacement.  There is a tiny bit of side to side play at the barrel/receiver joint.    The barrel droops relative to the receiver but it locks up pretty tight (except for the side to side play).   It has an awesomely nice trigger though.   It's real easy to cock with that long barrel.   Looks like a project.

[Hoosier Daddy]

Shhhh. The g-hog is venturing out...
Tonight may be it.

[bReTt]

FWB 601 @ paintballs 25 yards out.

[Blowpipe Sam]

I pumped up the Beeman Raider and shot two magazines of 20.06gr H&N FTT through it.  Accuracy was poor.  It may be clipping the moderator.  I had the muzzle ornament off it a few days back and I may have misaligned it when I stuck it back on.

[Back_Roads]

I have the Ebay sizers in .25 and .22. They do a good job.
Seems like everything NOE sells is out of stock. I mean EVERYTHING, not just sizers. Looks like they cater to PB reloaders.

Bill, do you happen to remember the seller for the sizers? Thanks

Sho nuff...

https://www.ebay.com/shop/pellet-sizers?_nkw=pellet+sizers

Thank you for that. Now, in your estimation, do you think these sizers can be used to size down from a .22 pellet to a .20 pellet?
I think James has a .20 sizer, maybe he will chime in? Thank you.

I did give a .22 pellet a go it's a no go, way too much force needed to make it happen in one step, maybe if it was beveled at the mouth more. But I still think it is to much for the design to hold up to.

[buellm2]

70 degrees today, warm enough for CO2 so I gassed up the Crosman 600.   First CO2 cartridge only gave me about 15 shots.  The action seemed sluggish and velocity seemed low.   Second CO2 cartridge gave me 20 full power shots and the action seemed normal.   I suspect it's time for a reseal.  Maybe I'll send this one out to a pro.

[avator]

Bill... I am shooting the Hoola-hoop this morning. 

Choot it !!!

[avator]

I have the Ebay sizers in .25 and .22. They do a good job.
Seems like everything NOE sells is out of stock. I mean EVERYTHING, not just sizers. Looks like they cater to PB reloaders.

Bill, do you happen to remember the seller for the sizers? Thanks

Sho nuff...

https://www.ebay.com/shop/pellet-sizers?_nkw=pellet+sizers

Thank you for that. Now, in your estimation, do you think these sizers can be used to size down from a .22 pellet to a .20 pellet?
I think James has a .20 sizer, maybe he will chime in? Thank you.

Might smear the lead too much.

[Hoosier Daddy]

Bill... I am shooting the Hoola-hoop this morning. 

Choot it !!!

 'twas fun... A little weak at first but after a few shots at  10 pumps she came back around.
I can not tell you how happy I am with this old pistol...

[bReTt]

FWB 601 @ paintballs

[Matchstickshooter]

 now that I've got this Mrod back on air I had to try it out.
Just had the chance!    Went down back and blasted a bean can with JSB EXACT 33.95 King Heavy
  Started out at 2800 psi and shot 8 pellets bringing it down to 2100.
 Back to the house and pumped it back up.     

[bReTt]

now that I've got this Mrod back on air I had to try it out.
Just had the chance!    Went down back and blasted a bean can with JSB EXACT 33.95 King Heavy
  Started out at 2800 psi and shot 8 pellets bringing it down to 2100.
 Back to the house and pumped it back up.     

I like that! 👌🏼

[Blowpipe Sam]

I shot some of the new 7.6gr Crosman Premiers through my 2100.  No joy..   Things improved when I switched to the Crosman Fire.   3/8” group at 18 yards.  I’ll stretch it out to 30 yards tomorrow and see if they continue to perform well.

[steve65]

Fired a few rounds with my Weatherby Mark V 460Weatherby Magnum 500grain projectiles @ 2650fps Thats recoil (no muzzle brake)

[Matchstickshooter]

now that I've got this Mrod back on air I had to try it out.
Just had the chance!    Went down back and blasted a bean can with JSB EXACT 33.95 King Heavy
  Started out at 2800 psi and shot 8 pellets bringing it down to 2100.
 Back to the house and pumped it back up.     

Not something you'd want to lug around all day! lol 
Got to come up with a sling !

[Back_Roads]

now that I've got this Mrod back on air I had to try it out.
Just had the chance!    Went down back and blasted a bean can with JSB EXACT 33.95 King Heavy
  Started out at 2800 psi and shot 8 pellets bringing it down to 2100.
 Back to the house and pumped it back up.     

Not something you'd want to lug around all day! lol 
Got to come up with a sling !

Wheels on the bipod legs

[Matchstickshooter]

  Jim, the legs are only for the picture! lol
 The legs aren't on it when I shoot offhand; it would be even heavier.
  As it is, to get down to the back yard, (to shoot outside) I have to go down an aluminum ladder, from the parking lot.
 Gun in one hand, grocery bag with targets/ammo slung over the other.
 I get exercise...