So.....what did you shoot today?

[Xraycer]

Another cold and even windier day. No matter! Wanted to shoot my new target again. Yesterday it was .22 from the Urban, today it would be the much harder hitting .25 Bullboss.
It was quite fun "walking" the target around the lawn.
The pellets are leaving decent dents in the rubber target. So, time will tell the durability of this target.

[Ronno6]

I put a few pellets thru my new Stoeger Compact.
Not a bad little gun, but the trigger not worth a hoot....

[avator]

Lots of targets.

[Oldgringo]

Still foggy all day!

[Lt. Dan]

Lots of targets.

Lots and lots of targets got painted today.

[Hoosier Daddy]

I shot my FWB 300S and Beeman AR 2078-B poorly in the 10M off season casual match.   

[Toddspeed]

I shot my FWB 300S and Beeman AR 2078-B poorly in the 10M off season casual match.   

Hey what do you know, I shot my AR2079b, but just doing lots of plinking. Mines on HPA, shooting about 4fpe right now. I tuned it to be a match for my 853, so my daughters and I could shoot together. I was lobbing JSB 7.33s out as far as 40 yards to hit silhouettes and wine corks.

[bReTt]

HW30S .22 cal at paper to get it sighted and rolled a tin can around the yard.  I love how this thing THUMPS those empty cans.  Too much fun!

[Jshooter71]

My buddy had to move furniture, so couldn’t make it to shoot. So we postponed. But for a January day, the weather couldn’t have been better. So I set up and shot the Octane Elite a bunch. I couldn’t get the factory sights low enough either, so I put the scope back on and zero’d it for the CPDUMs that were shooting pretty well at 30 meters. Then I shot the Parrus and dialed the sights for the CPHPs at 30 meters, then shot a a 10 shot group at 40 meters. It was a good day. Now I’m itching to put a scope on the Parrus and forget the open sights. 

[Lt. Dan]

My buddy had to move furniture, so couldn’t make it to shoot. So we postponed. But for a January day, the weather couldn’t have been better. So I set up and shot the Octane Elite a bunch. I couldn’t get the factory sights low enough either, so I put the scope back on and zero’d it for the CPDUMs that were shooting pretty well at 30 meters. Then I shot the Parrus and dialed the sights for the CPHPs at 30 meters, then shot a a 10 shot group at 40 meters. It was a good day. Now I’m itching to put a scope on the Parrus and forget the open sights. 

Sorry it did work for you.

[Jshooter71]

My buddy had to move furniture, so couldn’t make it to shoot. So we postponed. But for a January day, the weather couldn’t have been better. So I set up and shot the Octane Elite a bunch. I couldn’t get the factory sights low enough either, so I put the scope back on and zero’d it for the CPDUMs that were shooting pretty well at 30 meters. Then I shot the Parrus and dialed the sights for the CPHPs at 30 meters, then shot a a 10 shot group at 40 meters. It was a good day. Now I’m itching to put a scope on the Parrus and forget the open sights. 

Sorry it did work for you.

It was fun trying. I’ll use the sub-compact sight on something down the road with a weaver rail. Probably a .22LR for 100 meters. Today was good though.

[bReTt]

Just shot the 30S again!  So fun.  Set up to shoot into the shop.  Had my heating pad to sit on and dish heater facing me.  I shot off of a front bag.  42 shots at 42 dots on cardboard.  It sure does show how well or not I’m shooting.  Right now I’m saying not so well.  😱

[Lt. Dan]

Just shot the 30S again!  So fun.  Set up to shoot into the shop.  Had my heating pad to sit on and dish heater facing me.  I shot off of a front bag.  42 shots at 42 dots on cardboard.  It sure does show how well or not I’m shooting.  Right now I’m saying not so well.  😱

I know what you mean. Sometimes I seem to shoot really well other times I can't seem to get it together. 

[Struckat]

I am a revolver and bolt gun guy a heart.

[triggertreat]

My wife has me shooting a paint spray can today.  Hopefully I can do some shooting later on this nice warm sunny day in January.

[Mr. Panther]

Bouncing co2 cartridges, and squirrel head sized styrafoam with my QB78 .22 hy-bred and my .25 Gauntlet @ 25 and 30 yards.  Fun reactive targets, then took out the Crosman .177  NP for a bit of fun. A good cathartic day for me. 

[Ronno6]

I received my latest Crosman 2200 today.
I replaced the almost broken, wobbly stock with a new one I had, and all is good (except the color is  a couple shades off.
Already made a sleeve to repair the original...)

Anyhoo, I plinked some beer bottle caps off a magnet at 10 yards just bor test purposes.
I LOVE hearing then spin off into the distance....

Nice shooting 2200 BTW....

[Back_Roads]

  .30 880 @ 5 yards, because 0 - 5 yards is as far as it shoots flat 
[smg id=7681]
[smg id=7682]
 I did get one shot at 178 FPS, but was not able to repeat that speed so umm it didn't happen 

[Matchstickshooter]

 Shot the WF600P .22.   Sleeved piston and new seal  Tune in a Tube..... Super!   Just a thump, no twang.

[Blowpipe Sam]

  .30 880 @ 5 yards, because 0 - 5 yards is as far as it shoots flat 
[smg id=7681]
[smg id=7682]
 I did get one shot at 178 FPS, but was not able to repeat that speed so umm it didn't happen 

I did some rough math  and I hoped you would get closer to 300 FPS.  Oh well.
Thanks!  I tried some of the slugs you sent me in my 1400.  At eight pumps they were shooting about a Mil Dot low at twenty yards.  The gun is zeroed for 14.6gr pellets.  Quite accurate as well as I could tell.  All seven shots were offhand at different ranges.  Tomorrow I’ll try some rested shots at paper.  What is the weight of these slugs and what mold did you use?