Author Topic: So what did you Order / Receive today ? (to feed the "Beast" that lives within) (Read 1401045 times - 11 votes)
)

Hoosier Daddy · « **Reply #10540 on:** July 05, 2019, 03:44:41 PM »

Quote from: avator on July 04, 2019, 05:08:46 PM

Just pulled the trigger on that Boyd's stock for the Maximus that was in the classifieds. I got lucky because if i were going to order one from Boyd's it would be that one.

Glad I didn't see it!
Which design is it? I love my Boyd's Evolution but am thinking about a pro Varmint.

avator · « **Reply #10541 on:** July 05, 2019, 03:46:19 PM »

Quote from: Hoosier Daddy on July 05, 2019, 03:44:41 PM

Quote from: avator on July 04, 2019, 05:08:46 PM
Just pulled the trigger on that Boyd's stock for the Maximus that was in the classifieds. I got lucky because if i were going to order one from Boyd's it would be that one.
Glad I didn't see it!
Which design is it? I love my Boyd's Evolution but am thinking about a pro Varmint.

It's the Rimfire Hunter in nutmeg.

Rat Sniper (AKA: PaulT58) · « **Reply #10542 on:** July 05, 2019, 04:08:52 PM »

I received a Hatsan Regulator for my Galatian. I know they haven't gotten the best reviews, but Field Supply had them on sale for $40 shipped, so I figured I'd give it a try. I like having the ability to switch from regulated to unregulated by just swapping the air cylinder on these Hatsans.

avator · « **Reply #10543 on:** July 05, 2019, 05:10:26 PM »

Jeff recently went on a light mission from G O D. Everywhere he went folks got lights.

Insanity · « **Reply #10544 on:** July 05, 2019, 05:25:11 PM »

Quote from: avator on July 05, 2019, 05:10:26 PM

Jeff recently went on a light mission from G O D. Everywhere he went folks got lights.

I still need to put mine up .

Privateer · « **Reply #10545 on:** July 05, 2019, 05:29:34 PM »

Quote from: avator on July 05, 2019, 05:10:26 PM

Jeff recently went on a light mission from G O D. Everywhere he went folks got lights.

Wait. What?
You talking about the lights from Texas?

avator · « **Reply #10546 on:** July 05, 2019, 05:32:10 PM »

If that's where they came from... I reckon.

anti-squirrel · « **Reply #10547 on:** July 05, 2019, 07:32:52 PM »

Mister Amazon Delivery dude was by earlier with the RWS pellets; now Mrs Amazon Delivery Dudette came by with some .22 Sig Sauer wadcutters. They look a lot like Gamo wadcutters, and shoot about the same. Not as good as RWS Meisterkugelns, but better than the RWS Sport line of wadcutters. I spent about 5 minutes shooting through a 1 inch wide twig about 25 yards away aiming up at a 45 degree angle. The punky branch ended up with several tiny holes visible through the scope. These pellets are a solid Win.

Hoosier Daddy · « **Reply #10548 on:** July 06, 2019, 02:05:41 PM »

Quote from: avator on July 05, 2019, 03:46:19 PM

Quote from: Hoosier Daddy on July 05, 2019, 03:44:41 PM
Quote from: avator on July 04, 2019, 05:08:46 PM
Just pulled the trigger on that Boyd's stock for the Maximus that was in the classifieds. I got lucky because if i were going to order one from Boyd's it would be that one.
Glad I didn't see it!
Which design is it? I love my Boyd's Evolution but am thinking about a pro Varmint.
It's the Rimfire Hunter in nutmeg.

Beauty!!!

GumpIsrael · « **Reply #10549 on:** July 06, 2019, 02:20:49 PM »

Got a Benjamin 252 in the mail, it's pretty darn nifty!

fwbsport · « **Reply #10550 on:** July 06, 2019, 02:34:10 PM »

Out for Delivery    07/06/2019 4:16 A.M.    East Alton, IL, United States
Past Event
   Shipped    07/01/2019 7:09 P.M.    Mesa, AZ, United States
Past Event
   Label Created    07/01/2019 4:25 P.M.    United States

Service

UPS Ground Open the link in a new window

Weight

15.00 LBS

So my .22 HW35E will be here TODAY!

ShakySarge · « **Reply #10551 on:** July 06, 2019, 07:26:45 PM »

UTG SWAT etched reticle 4-16x56 30mm tube and a set of medium rings arrived this morning.

bear air · « **Reply #10552 on:** July 06, 2019, 07:35:52 PM »

Took advantage of the 20% off H&N pellets at Hatsanusa.com. 5 tins of 22 caliber sniper magnums, 2 tins of .177 piledrivers and 1 tin of 25 caliber Hornets. Oh yeah and a shroud holder for the 22 caliber ebay rust rod I got. They went a little too far with the modifying. I think they tried to drill 1/4 inch holes and when I tried removing it the darned thing snapped apart.

Rabbit\Squirrel Killer · « **Reply #10553 on:** July 06, 2019, 07:46:13 PM »

Removed NON-"Airgun" Sheridan paintball

Hoosier Daddy · « **Reply #10554 on:** July 06, 2019, 10:34:43 PM »

Quote from: Rabbit\Squirrel Killer on July 06, 2019, 07:46:13 PM

Removed NON-"Airgun" Sheridan paintball

HUH?
What do you mean "removed" and was it a Sheridan "Marker"?

Rabbit\Squirrel Killer · « **Reply #10555 on:** July 06, 2019, 11:29:18 PM »

Quote from: Hoosier Daddy on July 06, 2019, 10:34:43 PM

Quote from: Rabbit\Squirrel Killer on July 06, 2019, 07:46:13 PM
Removed NON-"Airgun" Sheridan paintball
HUH?
What do you mean "removed" and was it a Sheridan "Marker"?

I am not an expert it is the first paintball gun I have had. I believe it is the first version Sheridan PG.

avator · « **Reply #10556 on:** July 08, 2019, 04:29:30 PM »

Received that beautiful Boyd's Nutmeg stock that Techie had in the classifieds today. Believe me, the pictures don't di justice. Didn't have time to put it on the Maximus on my lunch break but you can bet it will be on there this evening. Had to use cheap scope mount to put the BSA scope on it but, I have some good one on the way. Pics when it's done.

Mr. Panther · « **Reply #10557 on:** July 08, 2019, 05:53:44 PM »

Well, my Yong Heng arrived today, and I put everything together, but the operational manual is almost a joke. I love the Chinglish directions, " Note: correct direction is cooling wind blow to pump body".
Before I fire this up I am going to have to go to Youtube and find some instructions on using it. Looks nice, location and mounting of temp gage leaves a bit to be desired though. I'm just going to use and adhesive tape to secure it to the housing as I don't want to leave the battery draining 24-7 and that way I can remove the batteries after I use it. Hope this runs well as I would hate to have to return it right away.

Hoosier Daddy · « **Reply #10558 on:** July 08, 2019, 06:35:36 PM »

Got a "gifted" Sentry stock and all the associated black synthetic hardware from Zeddymon today.
All he asked for was shipping.
Wow, what a great guy!

bear air · « **Reply #10559 on:** July 08, 2019, 11:35:08 PM »

Finally received the Fortitude today! Put the trigger on it and installed it into the Boyds AT ONE stock and mounted the scope. It looks great and most importantly its going to work good for my wife because its light weight and she really loves it. Might just make her my shootin buddy yet. The factory stock wasn't cracked either Brett lol.

Thank you to our advertisers!

So what did you Order / Receive today ? (to feed the "Beast" that lives within)

Author Topic: So what did you Order / Receive today ? (to feed the "Beast" that lives within) (Read 1401045 times - 11 votes) )

Author Topic: So what did you Order / Receive today ? (to feed the "Beast" that lives within) (Read 1401045 times - 11 votes)
)