Woo-Hoo!!! New Molds

[rintafile]

Here is the NOE I am testing.

Yup I got that mold. 4-cavity 2 GC and 2  PB in same mold

[TPL]

Yep! That's it!!!

Thank you Michael. I thought so.

This would be reconstruction of historic Ideal mold if Al will do it. Of course it is possible to make modifications with shorter rings or whatever but that is different bullet then.

[rintafile]

This would be reconstruction of historic Ideal mold if Al will do it. Of course it is possible to make modifications with shorter rings or whatever but that is different bullet then.

That's right. And there is that Winchester mold  which is even older than that Ideal probably early 20 century.

Getting "modern" version and those old molds could put top of priceself

[KnifeMaker]

I tried both the 100+ gr. and the 88 gr. thata Cedric sent me. RJ had me try a few of his, as well. Well, Cedric's were RJ's as well. LOL~!!!

I had the same problem with the 100= gr. as I did with the NOE 100+ gr. a 1/4-3/8" drop with ever shot, but ultra accurate. And such a small drop, is easily compensated for.

The 88 GR Ideal was almost unreal how accurate it was. Luckily The milled 100+ gr. mold down to 81 gr. is just as crazy accurat, with even more shots per fill than the 88 gr. Still, I would love to have a Ideal copy, only in anything but a darned single cavity. LOL!

Knife   

[rintafile]

I think NOE's forum some guy has that Spitzer Ideal mold and He is casting samples to Al. So it could be possible to get that mold if there is enough interested buyers... at least 10. I'm for sure interested..

[TPL]

I don't know if someone is doing something for this bullet but here is a drawing for you.



This is comparison between original model shadow view and CAD-drawing I made from it, nose in drawing is just lengthened to spitzer.



I was surprised when I saw magnification, bullet is a boattail.

[rintafile]

Yes! Thanks Timo! Well let's see and Waite what is going on...Some guy in NOE's forum found my old post concerning that Spitzer Ideal mold and promised send samples to Al. I'm interested all versions what we can get this Ideal mold

[rintafile]

I don't know if someone is doing something for this bullet but here is a drawing for you.



This is comparison between original model shadow view and CAD-drawing I made from it, nose in drawing is just lengthened to spitzer.



I was surprised when I saw magnification, bullet is a boattail.

So this Spitzer doesn't even get anybody interested?

[KnifeMaker]

I played with the NOE version quiet a bit today. Still, one of the most accurate bullets I have ever shot in an ag. Hole in Hole over and over again. Woo-Hoo!!!

Knife