TX200 spring kits...

[454 Big Block Chevy]

does anyone have any real world info on a TX200 spring kit...

Vortek kit vs Maccari...

Thanks

[harry palmer]

Have a wee look at this cos you get all the seals, piston rings and spacers as well ;  http://www.air-arms.co.uk/PDF/TX%20Mk%203%20SERVICE%20KIT.pdf

regards

Kenny

[Mark 611]

JM seals are exelent for the TX's at least the ones my brother got, If it were me I'd go with a VorTek kit I've used Tom kits in other guns I have and they are exelent. I have a TX 200 hc in .177cal and will probly use JM's piston seal and the VT spring and guide set up based on how my brothers gun turned out, it was shooting 965fps w/7.9gr CPHP's and very accurate! After we tuned it and hes put some shots thru it it has settled down nicely very smooth and deadly.

[LUC.V]

Hello,
http://www.gatewaytoairguns.org/GTA/index.php/topic,8925.0.html
and more testing following...

Grtj Luc,

[Checco]

I went with the v-mach kit from Steve Pope.They are even supost to take out some of the recoil.They also sell them here.
I am waiting for mine to come in the mail as we speak.
Matthew
http://www.airgunbuyer.com/Showproducts.asp?cat=accessories&SubCat=V-Mach%20Rifle%20Tuning%20Kits