1377 owners: get in here!

[squallywally]

Looks cool Ern.
I like the skeleton AK stock.
Nice choice of color too!

[silent_airman]

Ok, Ernesto, spill the beans. How did you do all the different colors? You can tell us. You're among friends. 

Lol.... No secret here silent, I spray paint and clear my guns. It's alot of work but it keeps me busy and I really enjoy it.

What paint do you use? I assume you primer as well? Rattle can or airbrush?

Rattle cans. Strip and sand the metal first, then DupliColor etching primer, Rustolium paint, then Rustolium matte clear.

Cool. I'll have to try that sometime.

[nickwild6]

Looks cool Ern.
I like the skeleton AK stock.
Nice choice of color too!

I agree......before seeing that gun I wouldn't pic that green in a hundred years.... Now after seeing the finish product I love it


Ernesto has some serious insight

[ibgp3]

I bought this one done. It has a lot of mods.
It may not have been used, since it didn't work when I got it.

Works now.

I thought it would work as a subsistence hunter, 
...but after the first shot the rest of the flock flies off when I start pumping.

[BillK]

Well I got bit by the 1322 bug.  Just got it and have cleaned and shot it and have started thinking about what to do (mods) with it.  I really like this nice light gun. 
My wife also liked it and so we ordered her a 2400kt .22.  I can see $ with wings in my future.

[sandman]

Hey guys, OP here..

Anyone know how far you can go with power mods? I'd like mine to be insanely powerful, but I just don't know the possibilities or how far I can take it. I'm looking for around 25-30fpe. Now I don't know wether or not this is even possible, but I figure that enabling the gun to take  A LOT more pumps would help. And by that I mean that you could go as far as 50 if you'd like, and then having one insanely powerful shot  Anyone know how I could make something like that, or has anyone already made something similar? Folks, please enlighten me.

[Privateer]

OK. I'm joining BillK in saying ya gots me hooked on the 1322!
Just ordered one!

That's gonna dip into my funds for the SMG 22 I want but I have a few big demo's lined up.
So it's all good.
 

[Tucannon]

Black and White
The front blade has been shaved and a touch of true glow white paint added. LPA MIM rear sight with a steel breech. It has a trigger job and the pump arm has been drilled. I added some weight in the grips for balance. I splashed some Ivory plastic paint on it, other then that it is all stock.
I pulled two out of six shots from 10 meters.

[squallywally]

Looks good and fine shootin Tuc

[Pepster]

Does anybody know if the barrel from the 1389 will fit a 1377?  If so, what is the length of the 1389 barrel (part # 1389-003)?

[silent_airman]

Does anybody know if the barrel from the 1389 will fit a 1377?  If so, what is the length of the 1389 barrel (part # 1389-003)?

It will fit. The 1389 was an older backpacker and came in a 14" length.

[MrHam]

Here's mine.

Not quite finished yet, but it sure is fun to shoot.

Wood grips, flat top piston, Mellonair flow through bolt and wide blade brass trigger, leapers red dot sight.

[bgmcgee]

Little late to the party but here is mine. Internals are Mellon flat top piston and valve. 12"lothar barrel with a Clague stripper. 1701 trigger and re-shaped RB super pumper. Bluefork wire stock and barrel band.She shoots quite well.
 
image ru

[cwlongshot]

Here's mine.

Not quite finished yet, but it sure is fun to shoot.

Wood grips, flat top piston, Mellonair flow through bolt and wide blade brass trigger, leapers red dot sight.

LOVE THE STOCKS!!! 

CW

[nickwild6]

Parts finally got here....looks awesome....will post pics when installed

[JJ]

Here is my 1322 backpacker creation.
 Cr. Steel breech
Prod barrel and shroud
Storey LDC
Flat-top piston and ported valve
secondhand custom brass trigger
PVC breech riser
Polly tube transferport
Drilled and taped a new (small) breech screw.
1399 stock with a riser pad/stock pocket I have been working on..
   Next step will be new bolt probe and a hammer spring adjuster... but I'm in no rush, this thing is hot enough as it is..

[silent_airman]

Here is my 1322 backpacker creation.
 Cr. Steel breech
Prod barrel and shroud
Storey LDC
Flat-top piston and ported valve
secondhand custom brass trigger
PVC breech riser
Polly tube transferport
Drilled and taped a new (small) breech screw.
1399 stock with a riser pad/stock pocket I have been working on..
   Next step will be new bolt probe and a hammer spring adjuster... but I'm in no rush, this thing is hot enough as it is..

How did you attach the PRod barrel and shroud to the breech? I am not familiar with the PRod.

[JJ]

How did you attach the PRod barrel and shroud to the breech? I am not familiar with the PRod.
[/quote]
I had to file the back of the Marauder Pistol barrel to get it to fit in the Crosman breech, but the ports line up nicely, and the O.D. is the same. I will be adding an extra grub screw at some point, to better secure the barrel to the breech.
   FYI- the Mrod shrouds and bushings also fit the standard Crosman barrels.  Make the barrel any length you want leaving plenty of room inside for other things..

[myNPS]

17'' Crosman Discovery barrel (I cut and crowned)
CW

Can you point me to a HOW To on crowning a barrel?  Thanks

[wallawallaron]

17'' Crosman Discovery barrel (I cut and crowned)
CW

Can you point me to a HOW To on crowning a barrel?  Thanks

I have seen a lot of videos on youtube.  Google it and lots come up,also use the search feature here and lots comes up.
I have not crowned a barrel yet myself just watched videos.

Hope that helps. Someone here with that experience will chime in I'm sure.

WWR