datazmans casting

[badredbird]

recieved a very nice box of  bullet heads from paul, they were sized 358, they shot very well at thirty yards , you could cover with a quarter , at sixty they were at about a half inch , they were very very nice in my gun, we did discuss the bore diameter , my gun slugged at 358.6 according to will piatt, i belive his was 356 , and change, i was kind of surprised at the variance in diameter , seems its not limited to just bore size in the korean guns, he is going to make a different set, , i did promise to post pics of the target as soon as i get a chance , as i will shoot anothr group   thanks paul !!!

[datazman]

badredbird:

You are very welcome.
I am delighted that the bullets I cast and sent to you for testing did great in your rifle. They did better than I expected.
I can hardly wait to see your target.
I will be sending you some as cast in the next day or so being your bore is unusually large.

For those that are not familiar with the cast Boolits we are talking about, they are mentioned at the end of my thread about my new Career 707 Ultra in 9MM:

http://www.gatewaytoairguns.org/GTA/index.php/topic,22460.0.html

The cast Boolits are pictured below. They were cast from a custom mold made for me by Accurate Molds and is mold number 36-090A.

I have three reports so far from testers:

badredbird (post above) who tested them with a 9MM Sam Yang Recluse.

Manny (Nomadic Pirate) reported that they shot a one hole group at 35 yards with 2 different 9MM 707 Ultra’s.

Marvin (mellowroadman) reported they shot terrible from his Corsair.

I did test them once in my own Career 707 Ultra 9MM but when I sent my rifle to Will Piatt for tuning I learned my barrel needed to be cut back at the muzzle and needed to be crowned so that test in my opinion was not a fair assessment.
I have not had a chance to test them again as on the day I had time to shoot it was raining heavily.

Till the next time.

Paul

[Nomadic Pirate]

Yep, those bad boys shot real good out of both my ULTRAs

[bluzjamer]

Nice job Taz.....read the whole linked thread. I do RC too!

[datazman]

bluzjamer:

Thank you for the compliment.
I am also hoping to get out this weekend and test the cast Bullets myself.

Not to digress from the thread but I am best known in the RC community as a NEAT Fair Volunteer and Photographer.

Paul