2250B building from spare parts

[Onebaddj]

Hi Mr. Myers, Thank you for Emailing. Your question is a good one. I have never used the Boss 12-gram valve with pressures of 3,000 psi, so I can't say with certainty. The walls of the valve are thinner than the walls of the stock valve, so my answer would be no. The valve has not been tested at that high a pressure. We recommend no more than 1,200 psi.

Here is the reply from crooked barn in ragards to hpa and the boss valve! Not advised by the guy building so i would not try it.

[0351_Vet]

Thanks for the update DJ.......

[Crosshairs]

Thanks ! we cant discuss this in the crosman benjamin airgun gate section what a joke.

[grumpy]

I have used the co2 boss valve up to 2000 psi. made over 20 fpe with kodiaks.

[0351_Vet]

I have used the co2 boss valve up to 2000 psi. made over 20 fpe with kodiaks.

Dave, I think some wires got crossed in the conversations. Yes, I agree with Boss @ 2KPSI

[Crosshairs]

I have used the co2 boss valve up to 2000 psi. made over 20 fpe with kodiaks.

Thats good news i now need to order a guage. Where did you get your gauge.
                                                               Mike

[grumpy]

Mike,

I use the fill gauge on my great white 88cf tank. I have a couple of 22xx projects on the fire. Just got a couple of 13ci tanks for my AS2250XT is one. The other that uses the co2 boss valve is documented a little here http://www.airgunsforum.com/showthread.php?p=352#post352  Notice the shot string at 2K psi. Its pretty efficient.

Dave

I have used the co2 boss valve up to 2000 psi. made over 20 fpe with kodiaks.

Thats good news i now need to order a guage. Where did you get your gauge.
                                                               Mike

[hoagy]

very nice work...