Author Topic: Hatsan Jet I/II Discussion (Read 56730 times))

Rat Sniper (AKA: PaulT58) · « **Reply #260 on:** March 13, 2023, 03:10:51 PM »

Quote from: Insanity on March 13, 2023, 02:13:58 PM

Made a phone call to Baker's and order a jet 1 in 25. When I pick it up there may be some accessories purchases. But I think I will order a pistol case today.

Congrats on the Jet 1 Matt! A nice red dot really finishes it off!

Insanity · « **Reply #261 on:** March 13, 2023, 03:17:39 PM »

Quote from: Rat Sniper (AKA: PaulT58) on March 13, 2023, 03:10:51 PM

Quote from: Insanity on March 13, 2023, 02:13:58 PM
Made a phone call to Baker's and order a jet 1 in 25. When I pick it up there may be some accessories purchases. But I think I will order a pistol case today.

Congrats on the Jet 1 Matt! A nice red dot really finishes it off!

Thanks Paul! Which sight are you using in the one pics of the jet 1 you shared it looked nice and low? I may squirt over to HF and get a case there it might be thicker than I need but its cheap and local.

Rat Sniper (AKA: PaulT58) · « **Reply #262 on:** March 13, 2023, 04:08:04 PM »

It's a Trijicon, not real sure what model, but here are a couple pictures. It's also tal enough to use with the Sortie 10 shot magazines! I did have to use a couple of the snap-in Picatinny to Dovetail adapters because, even though it looks like a picatinney rail behind the breech opening, it's only dovetail. In front of the Breech is both, but I can tell you the dovetail is a more secure mount. I have knocked a scope loose that was attached with Picatinney Rings!

Insanity · « **Reply #263 on:** March 13, 2023, 05:03:34 PM »

Thanks Paul I'll have to suss that one out that dot looks small and crisp.

I procured the case in green from HF. It's thick but that gives me options for altitude storage. In other words the stock will be stoed in the bottom layer.

Insanity · « **Reply #264 on:** March 13, 2023, 05:34:14 PM »

Looks like this one uff da may I dont think I will be buying that soon.

avator · « **Reply #265 on:** March 13, 2023, 05:41:05 PM »

I don't even own an airgun that cost me that much.

stroo · « **Reply #266 on:** March 13, 2023, 05:45:57 PM »

Same here, that's more than I usually spend on my long range rifles. Guess I'm what they call "a poor"... $:-\$

The chin make a rip off of that Trijicon, I think they are under $50 but I know nothing else about them because I, personally, don't support chin patent theft.

Insanity · « **Reply #267 on:** March 13, 2023, 05:48:19 PM »

Quote from: avator on March 13, 2023, 05:41:05 PM

I don't even own an airgun that cost me that much.

LOL I have one under my bed I paid 600 for. I do have a issue with a 430 dollar sight on a 230 dollar gun but Im strange.

Rat Sniper (AKA: PaulT58) · « **Reply #268 on:** March 13, 2023, 05:54:44 PM »

LOL! I don't think that's the one I have! I'm betting what I have is a counterfeit from China, because I'm sure I didn't pay that much for it!

Yep, found my order on AliExpress!

https://www.aliexpress.us/item/3256801374540690.html?spm=a2g0o.order_list.order_list_main.165.2dea1802bvPg6a&gatewayAdapt=glo2usa4itemAdapt&_randl_shipto=US

Still a nice compact red dot for the price! But, this was before AliExpress started demanding I submit pictures of my Driver's License and the front and back of my Credit Card to place an order using PayPal! So, as long as they are pulling that scam, I'm no longer purchasing anything from AliExpress!

Here's another alternative, I forgot I had this one, it's a SwampFox. Also very compact, but has the bigger style reticle...

Insanity · « **Reply #269 on:** March 13, 2023, 06:01:12 PM »

For the same reason I won't order from Ali.

Rat Sniper (AKA: PaulT58) · « **Reply #270 on:** March 13, 2023, 06:16:20 PM »

Okay, so I just ordered another one from AliExpress, used PayPal and the transaction went through with no problem! $29.87 shipped! Maybe it was the item I was trying to order before that had the problem. I was trying to order one of the EdGun Eazy Oil knock-offs and it will not complete that transaction! I'm beginning to think it might be the Vendor!

Insanity · « **Reply #271 on:** March 13, 2023, 06:21:52 PM »

Good to know that didnt require all the extra info.

avator · « **Reply #272 on:** March 13, 2023, 06:33:29 PM »

Quote from: Rat Sniper (AKA: PaulT58) on March 13, 2023, 06:16:20 PM

Okay, so I just ordered another one from AliExpress, used PayPal and the transaction went through with no problem! $29.87 shipped! Maybe it was the item I was trying to order before that had the problem. I was trying to order one of the EdGun Eazy Oil knock-offs and it will not complete that transaction! I'm beginning to think it might be the Vendor!

Or maybe a scammer...
I did notice that the red dot you linked clearly said "Made in the USA" on it.... ?

Insanity · « **Reply #273 on:** March 13, 2023, 06:34:03 PM »

Quote from: avator on March 13, 2023, 06:33:29 PM

Quote from: Rat Sniper (AKA: PaulT58) on March 13, 2023, 06:16:20 PM
Okay, so I just ordered another one from AliExpress, used PayPal and the transaction went through with no problem! $29.87 shipped! Maybe it was the item I was trying to order before that had the problem. I was trying to order one of the EdGun Eazy Oil knock-offs and it will not complete that transaction! I'm beginning to think it might be the Vendor!
Or maybe a scammer...
I did notice that the red dot you linked clearly said "Made in the USA" on it.... ?

They will clone everything.

Rat Sniper (AKA: PaulT58) · « **Reply #274 on:** March 13, 2023, 07:06:57 PM »

Quote from: Insanity on March 13, 2023, 06:34:03 PM

Quote from: avator on March 13, 2023, 06:33:29 PM
Quote from: Rat Sniper (AKA: PaulT58) on March 13, 2023, 06:16:20 PM
Okay, so I just ordered another one from AliExpress, used PayPal and the transaction went through with no problem! $29.87 shipped! Maybe it was the item I was trying to order before that had the problem. I was trying to order one of the EdGun Eazy Oil knock-offs and it will not complete that transaction! I'm beginning to think it might be the Vendor!
Or maybe a scammer...
I did notice that the red dot you linked clearly said "Made in the USA" on it.... ?

They will clone everything.

Exactly! I did notice that when I did the order today, the picture no longer shows the Trijicon logo or the Made in USA, so maybe they are cracking down on the cloning! Sadly, it’s probably very similar to the original, but way cheaper!

Insanity · « **Reply #275 on:** March 13, 2023, 07:09:30 PM »

I went ahead and ordered one I expect many weeks before I get it.

Insanity · « **Reply #276 on:** March 13, 2023, 07:46:04 PM »

The case I bought.

Back_Roads · « **Reply #277 on:** March 13, 2023, 07:59:41 PM »

My next dot sight will be this, https://www.aliexpress.us/item/3256804828352754.html?

Spacebus · « **Reply #278 on:** March 13, 2023, 08:04:27 PM »

Quote from: Back_Roads on March 13, 2023, 07:59:41 PM

My next dot sight will be this, https://www.aliexpress.us/item/3256804828352754.html?

Same here, unless, something better comes out by the time I'm ready to buy

stroo · « **Reply #279 on:** March 13, 2023, 08:20:26 PM »

By the time I'm ready to buy something will definitely be out! $:-\$

Hey Matt, is that the 3800 or 4800 case?

Thank you to our advertisers!

Hatsan Jet I/II Discussion

Author Topic: Hatsan Jet I/II Discussion (Read 56730 times))