Hatsan Jet I/II Discussion

[Wayne52]

I was checking this out on youtube to see if the lever action could be switched over to the right side for lefty's but didn't see anything about it, that's kind of a deal breaker for me.

[Rat Sniper (AKA: PaulT58)]

Maybe as an execution tool at point blank range it would work. I just can't see 16 FPE being enough at any distance

The .25 is making 19 FPE with the Hades.  I'm not sure if there is much that can be done to impreove that any, but I did find out the transfer port size is the same on both the .25 and .22.  Since there is no choice of caliber when ordering the dual cylinder, I suspect it's probably the same for all caliber, so it may help it increase it some on the .25.

I was checking this out on youtube to see if the lever action could be switched over to the right side for lefty's but didn't see anything about it, that's kind of a deal breaker for me.

Wayne, there is no opening on the right side of the breech, so swapping to a right side lever isn't possible.

[Back_Roads]

Maybe as an execution tool at point blank range it would work. I just can't see 16 FPE being enough at any distance

The .25 is making 19 FPE with the Hades.  I'm not sure if there is much that can be done to impreove that any, but I did find out the transfer port size is the same on both the .25 and .22.  Since there is no choice of caliber when ordering the dual cylinder, I suspect it's probably the same for all caliber, so it may help it increase it some on the .25.

I was checking this out on youtube to see if the lever action could be switched over to the right side for lefty's but didn't see anything about it, that's kind of a deal breaker for me.

Wayne, there is no opening on the right side of the breech, so swapping to a right side lever isn't possible.

So you aare saying there is room to make these dump some air on a .25 projectile

[Rat Sniper (AKA: PaulT58)]

James, I would think so, the TP is only 4mm and I suspect it's the same for all calibers, from .177 through .25, so they could possibly be opened up some for both the .22 and .25 for some improvement!

Also, when I had the barrel off I noticed there is no rifling at the breech end of the barrel where the transfer port is located, so it should be fairly easy to polish after drilling the barrel.  What I don't know is if there is a polymer opening between the valve and barrel, and if it would need to be opened up as well.  I'm also not sure if it's accessible or not.  May have to dig back into it...

[Back_Roads]

 Looks good up to there I am imaging the up stream porting to be similar to the PP700sa pistols, and can be worked on.

[Rat Sniper (AKA: PaulT58)]

Looks good up to there I am imaging the up stream porting to be similar to the PP700sa pistols, and can be worked on.

That would be nice, may be one of the holes where the grub screws secure the block to the breech is align with the transfer port, but, that's only a 2.5mm hex key grub screw!  The two screws that hold the front of the trigger guard.pistol grip and the dual picatinny rail are 4mm, I miss identified them in an earlier post as being 3mm.  But again, the choke point is going to be the pass through from the valve to the barrel ports.

[Insanity]

It is very sleek, and I do like it. If I had an unlimited budget I would have all of these little PCP pistols/carbines.

Here are some pictures of the Jet 1 with the side picatinny rails removed.  You can get an idea of the size with and without a moderator:

Thank you Paul I really appreciate you taking the time to post that. Kinda reminds me of say desert eagle 50 or a smith and Weston 500 as far as size goes. Make me want one more and I like how that sight looks.

See why I want to power up a .25 and keep it a pistol

I probably missed that I started skimming a few pages ago. How ever I think if you wanted a nice truck gun or tractor gun etc and wanted to take down say a hog or such then sure.

Do you really think one of these would take a hog?

Lol... Yes. Do I think YOU can no.

Maybe as an execution tool at point blank range it would work. I just can't see 16 FPE being enough at any distance

As far as this goes between you and me I'm done discussing it. I was directly replying to Jamie and that he stated he wants to power one up. So it won't be 16fpe.

[Spacebus]

It is very sleek, and I do like it. If I had an unlimited budget I would have all of these little PCP pistols/carbines.

Here are some pictures of the Jet 1 with the side picatinny rails removed.  You can get an idea of the size with and without a moderator:

Thank you Paul I really appreciate you taking the time to post that. Kinda reminds me of say desert eagle 50 or a smith and Weston 500 as far as size goes. Make me want one more and I like how that sight looks.

See why I want to power up a .25 and keep it a pistol

I probably missed that I started skimming a few pages ago. How ever I think if you wanted a nice truck gun or tractor gun etc and wanted to take down say a hog or such then sure.

Do you really think one of these would take a hog?

Lol... Yes. Do I think YOU can no.

Maybe as an execution tool at point blank range it would work. I just can't see 16 FPE being enough at any distance

As far as this goes between you and me I'm done discussing it. I was directly replying to Jamie and that he stated he wants to power one up. So it won't be 16fpe.

 

I've just never seen anyone suggest a .25 cal PCP pistol for hogs.

[avator]

A look back...

[Rat Sniper (AKA: PaulT58)]

It's all about shot placement!   

[avator]

Yup.... Manny has proven that on many occasions.

[Insanity]

I read through from begining to where I started at about page 10. Well if I am to buy a new pistol it will be a jet 1 in 25. Just have to get the info for Roblox that my daughter spent over 1000 when she figured out how to get around my parental controls. 

[Rat Sniper (AKA: PaulT58)]

I read through from begining to where I started at about page 10. Well if I am to buy a new pistol it will be a jet 1 in 25. Just have to get the info for Roblox that my daughter spent over 1000 when she figured out how to get around my parental controls.

OUCH!  Hey, if you didn't authorize the charges, you shouldn't be responsable for the charges!  But, that might mean you're daughter might be in more hot water than just with you!   

[Back_Roads]

 

[Insanity]

I read through from begining to where I started at about page 10. Well if I am to buy a new pistol it will be a jet 1 in 25. Just have to get the info for Roblox that my daughter spent over 1000 when she figured out how to get around my parental controls.

OUCH!  Hey, if you didn't authorize the charges, you shouldn't be responsable for the charges!  But, that might mean you're daughter might be in more hot water than just with you!   

Not sure what they can do to an 8yo. I have to gather up all the info and email it off. I'll do that after I take them home and doing other paperwork tonight.

[Back_Roads]

 The other course of action would be a class action action law suit for the effects of setting off boom sauce

[Insanity]

Lol

[Rat Sniper (AKA: PaulT58)]

I had purchased a Plano 2 Pistol Case awhile ago when it was on sale, with no real need or purpose for it at the time.  Turns out, it makes for a perfectly compact Grab and Go for Two!  This an my 90ci Guppy Tank of small Xisico Compressor and I'm set for some plinking or pesting!

[Insanity]

Like they designed it to fit that case.

[Insanity]

Made a phone call to Baker's and order a jet 1 in 25. When I pick it up there may be some accessories purchases. But I think I will order a pistol case today.