Reminded Al About Pellet Moulds

[EdinGa]

I prefer aluminum to brass simply because of the weight. I haven't had any issues with accuracy from aluminum.

[Wayne52]

I have suggested that Al focus on 2-cavity RG style moulds in both aluminum and brass, and 4-cavity in aluminum.... as I have read many comments about the 4-cavity brass being too heavy for comfort.... Most airgunners want the ability to change from HP to FN, and NOE is the only company to offer that!....

Bob

The only one of the two .177 and 20 cal that you mentioned I'll get will be for the .177.  The BBT's are really nice in most of my .22's in hollowpoint, they won't fit my Crosman 362 but heck that gun is better off with wad cutters but pretty much all my Benjamin/Crosman guns will chamber those with no problem at all.  A lot of the China guns also chamber them great too.  I pretty much haven't bought anything .177 since the DAR's first came out except for a couple co2 pistols.
  I've got a DAR 1st gen that was the best out of the three calibers that I bought in the 1st gen, that gun worked fantastic for about a year, it then started leaking slowly.  I haven't used it since it started leaking and as soon as that mold is available I'll order it, and do a teardown of that DAR .177 for all new o rings and complete and thorough inspecting of everything in it.  The main problems in those guns all seemed to be in the regulator and I might try urethane in that part of the gun to see how it does.  Those DAR's are very powerful(even being regulated) guns and to my knowledge I haven't seen them copied yet, the hammer in those rides inside of a polymer cylinder.

[rkr]

I hope Al can make those .172 BBT molds soon. All 172 molds are out of stock.

[Nvreloader]

Wayne
There will be 2 of us in that race, and for the 20 cal also.........lol
Don

I'll definitely be getting the .177 BBT mold as soon as possible, I'm going to go for a 4 cavity mold if they're available in aluminum. 

[rsterne]

I got an email from Al today, and he hopes to start replacing inventory next week....

Bob

[Insanity]

I got an email from Al today, and he hopes to start replacing inventory next week....

Bob

I will be looking daily.

[Back_Roads]

I got an email from Al today, and he hopes to start replacing inventory next week....

Bob

I will be looking daily.

Wake me up when the .177 and .20 bbt get there

[EdinGa]

I have suggested that Al focus on 2-cavity RG style moulds in both aluminum and brass, and 4-cavity in aluminum.... as I have read many comments about the 4-cavity brass being too heavy for comfort.... Most airgunners want the ability to change from HP to FN, and NOE is the only company to offer that!....

Bob

Question about the 1k club... Does it include the total price of orders with shipping or just 1k of molds themselves?

[Insanity]

I have suggested that Al focus on 2-cavity RG style moulds in both aluminum and brass, and 4-cavity in aluminum.... as I have read many comments about the 4-cavity brass being too heavy for comfort.... Most airgunners want the ability to change from HP to FN, and NOE is the only company to offer that!....

Bob

Question about the 1k club... Does it include the total price of orders with shipping or just 1k of molds themselves?

Total price of orders.

[EdinGa]

I have suggested that Al focus on 2-cavity RG style moulds in both aluminum and brass, and 4-cavity in aluminum.... as I have read many comments about the 4-cavity brass being too heavy for comfort.... Most airgunners want the ability to change from HP to FN, and NOE is the only company to offer that!....

Bob

Question about the 1k club... Does it include the total price of orders with shipping or just 1k of molds themselves?

Total price of orders.

Thanks! I totaled my orders under my account and I'm well inside of club territory then.

[Insanity]

It will be automatically added at the end of the check out process, just before you click the final button to pay.

[EdinGa]

It will be automatically added at the end of the check out process, just before you click the final button to pay.

I've got to recover from my last 2 orders before I can take advantage of it. 🤣 It's a good time though with the new stuff coming.

[Insanity]

I have to recover from buying parts for my s10 and then Christmas gifts but if i see a mold I have been waiting on i wont wait.

[Wayne52]

That 10% make a considerable difference on orders, next time I order I'll probably get a couple more sets of handles
I've been working so long with just one set and it would sure be handy to have all my most used molds always on handles.

   

[Insanity]

That 10% make a considerable difference on orders, next time I order I'll probably get a couple more sets of handles
I've been working so long with just one set and it would sure be handy to have all my most used molds always on handles.

I have 4 sets of noe then one other set I got in my big dipper kit. I will order at least 1 set if not 2 on my next order.

[EdinGa]

I've got 10 or 12 Lee 6 cavity handles that work great for NOE molds. I used to think I needed handles for every mold I own, but I quickly realized that just made them harder to store.

[Insanity]

I want enough to run all the molds for the session with out having to hot swap. Also I have some molds I have to remove 2 hp pins so if I got that running then those handles and mold are going to stay put.

[EdinGa]

I want enough to run all the molds for the session with out having to hot swap. Also I have some molds I have to remove 2 hp pins so if I got that running then those handles and mold are going to stay put.

I rarely cast for PB anymore so I have plenty to go around for my air rifle molds.

[brewbear]

Wayne
There will be 2 of us in that race, and for the 20 cal also.........lol
Don

I'll definitely be getting the .177 BBT mold as soon as possible, I'm going to go for a 4 cavity mold if they're available in aluminum. 

Don, don't forget the laggards  I'm in for the .177, the .20 and the wadcutter.

[Nvreloader]

I got an email from Al today, and he hopes to start replacing inventory next week....

I will be looking daily.

I'll be checking every hour, I am retired and have to have something to kill the day..........LOL
Tia,
Don