New Beeman 2027 pcp pistol

[desertplinker]

https://mannofirearms.com/

Found this site. Seeems legit. They have the 2027 for $108.00 plus $10.00 dollars flat rate shipping.

[Hawkeye51]

Thanks Steve

I just talked to the owner and he stated that if it says "add to cart" then they are in stock, but followed up with, it will be drop shipped to me. Total cost shipped $118.00. Got my fingers crossed, even if it's a project gun.

That seems too cheap to pass up. I'll let you guys know when I receive it. Listed on Amazon "in stock" $ 145.00 shipped, with prime.

[James340]

So how is it?

Well...... I went ahead and ordered one. $159.99 - 10% + 23.95 shipping= $167.94 to my door.
Hope I don't regret it!
I am not one to buy anything that is new to the game but with it getting colder I felt I really needed a PCP pistol.
My co2 pistols are getting a little finicky and my break barrels are a might rough on my two wore out shoulders.
Two total reconstructions in 1 1/2 years but they are coming along well. Hope this gun will keep me shooting this winter.

[Hawkeye51]

Well I ordered this pistol at noon on March 1st. and missed  UPS signature required delivery today @ 4 p.m. March 2nd.  If the pistol looks good when I receive it tomorrow, I'll post this on the "Bargin Gate". Man, that is what I call fast service.

[x3baddad]

well I just ordered one also after seeing you get a delivery attempt that quick

[Hawkeye51]

Good luck to both of us! For $118.10 delivered this will make a fun little project pistol. I don't have big hands, but I do have a dremel & some sand paper. Who knows? Looking forward to that delivery attempt tomorrow. I'll keep you posted.

[rkrr20307@comcast.net]

I also ordered 1 on 3/1 in the afternoon and so far have confirmation it is being processed but no tracking or out for delivery info yet. 

[Hawkeye51]

When I called, I spoke with Barry Manno the owner. He was quite pleasant and answered my questions about his web site, but didn't know much about the pistol. He said to check my spam mail just in case messages ended up there, however the order confirmation & shipping confirmation were both in my regular email. Since he doesn't have a brick and mortar store, I doubt there will be any post sale support, except tracking, refund etc. if there is a problem with delivery. I was quite surprised to see a delivery attempt the next day. I'm going back to his website today to see if there are any other air gun bargains.

[desertplinker]

Mike
They seem to be a small family run business. My air gun piggy bank is too low for purchase but I hope it works out well for you. Following ......

[Hawkeye51]

My new Beeman 2027 pistol arrived today. It was well packaged & double boxed. It came with a fill probe, two 12 round magazines, 2 single shot trays & one extra breech o-ring. Every thing looks good & I'm on my way to air it up right now. Although the mags are plastic, they look great and are the top loading, same direction style with a fixed clear plastic cover. You rotate the magazine cylinder, not the cover. More to come later.

[desertplinker]

My new Beeman 2027 pistol arrived today. It was well packaged & double boxed. It came with a fill probe, two 12 round magazines, 2 single shot trays & one extra breech o-ring. Every thing looks good & I'm on my way to air it up right now. Although the mags are plastic, they look great and are the top loading, same direction style with a fixed clear plastic cover. You rotate the magazine cylinder, not the cover. More to come later.

Yippee!!! at least a good start !! following ......

[rkrr20307@comcast.net]

Received my tracking number but no tracking update. Waiting patiently. Keep us posted. Thanx

[rkrr20307@comcast.net]

Tracking update shipped out of St. Louis and due to me 3/9/22.

[desertplinker]

Well off to the races I see it's on the Bargain gate I hope they can survive the rush as they are a small business?

[x3baddad]

Got my tracking number sunday the 6th should be here by the end of the week, 

[74hillbilly]

I haven't had much time to really check it out good but my first impression was WOW!
Here are some specs that may be useful.
My first concern was size of it. After further inspection it looks really large but in reality its the same length as the Prod at "18 long.
I think that the stock having a bulky look makes the whole gun look massive but its well balanced and had no issues shooting off hand with one hand but I am sure that might change when this gun is scoped.
Mine has very decent blueing and nicely finished wood for the price.
The adjustable two stage trigger is very smooth and predictable with a 3 lb pull. manual safety.
Weight comes in at 3 lbs 12 oz.
12 shoot mag.
Single shot tray.
3000 psi fill no problem filling with a hand pump.
This gun has a grip underlay adjustment to allow for a better fit of shooters hand.
One thing I think was a nice touch is that the fill port is not exposed to the elements it has a sliding collar that covers the port when not in use.
I was able to get a little shooting in and was shocked at the amount of velocity adjustment this thing has.
Shooting 7 grain Rws pellets at low power I got 500 fps. Then I cranked it up to full power and clocked it at 915 fps.
On low power its not to loud but on high power forget it, it sounds like a 22 mag. its definitely not back yard friendly.
I hope to get it tuned and do some groups today.
'

I have just received mine. It is quite nice in my opinion. I am wondering how many turns in you have, when at "max"? What I am feeling from flush with the end of the main tube cap is 4 full turns with nearly no resistance. After which I hit a "wall". Is this the end of travel or the beginning of contact. I have all pressure off the gun and it is decocked.

[Airnut]

No idea I never counted but it was a bunch.
As you turn it in you should feel more and more resistance from the hammer spring as it compresses.
You realy need a chrony to check your velocity.

[74hillbilly]

Thank you for your fast answer! I have a chrony on the way.

[74hillbilly]

I found the problem! It was the rear screw holding the action to the tube, as well as helping retain the rear cap. It protruded into the threads .018". I trimmed 20 thou off and releveled the end. Problem solved. Now the degas tool engages as well, no more shooting it down. I don't like hitting a valve without sufficient air pressure against it. I plan to visit the range soon. I will have data on a variety of pellets at differing distances. If my camera cooperates I will have some pics. Thank you again for responding. May others benefit from my finding.

[Airnut]

Ok I got home a little early today so I pulled out the 2027.
Backed out the adjuster flush with the outside around 22 turns in for max power.
The adjuster will go in 30+ turns but the gun will not cock. At 22 turns you can hear the spring compressing and very easy to turn.
So if yours will only turn 4 turns from flush and assuming they didn't change anything after the first production run there seams to be something amiss with your gun. My gun was the third gun made #0003