AV Avenger

[OTmachine]

Following this.  I have a .25 cal coming from RL this week also.

[avator]

Congrats Joe.

[OTmachine]

Thanks, Avator.   And congrats to you too!   I got this baffle coming too.  https://www.ebay.com/itm/Internal-Shroud-Baffles-for-Air-Venturi-Avenger/333669785823?hash=item4db044e0df:g:zzgAAOSwtX5fIedS

Keith

[avator]

I'm pretty sure it won't be no where near as loud as my nekid Sumatra or my 12ga shotgun so I don't need no stinkin' baffle.... lol

[mrbulk]

Was exploring baffles for airgun shrouds on ebay, found the guy (geoffk) recommended by members here, who makes them for the ATI Liberty right now. I reached out to him and explained I have an Umarex Origin on order that is similar to the Avenger.

Turns out he has baffles   available right now   for the Avenger, but just hasn't updated his ebay listings yet. So I ordered one on the chances it will also fit my incoming Origin.
If anybody's interested I contacted him through his ebay listing on the Liberty baffles.

[Dan H]

OK, OK, OK !!!!    I did it.
Just placed my order for the .25 from RL Airguns. $299 shipped.
Y'all happy now?   lol

  HA ! HA !       it just comes to a point that ya got to have it no matter how many guns you have!  ... I kept telling myself you have enough air guns you don't need it ... but the gun is to good for the $$$ to pass up so I ordered the avenger .25 from RL and it should be here in the next day or 2  ... so much for will power the Dark side won again with avenger !  and i cant wait to get/shoot the avenger ..  

[Wayne52]

I won't order baffles on ebay anymore simply because the last I ordered for my Liberty did absolutely nothing for the gun.

[tracker1955]

My Liberty does great with just a spring and a scotch brite pad upfront. Low tech but works great, idea came from  Dave ezman.

[festis77]

I'm using a 1" TKO moderator in 25 cal on my .22 Avenger. Really quiets the gun down and does not block the fill port cap. Adds about 7" to the gun length though. I think this is it:

http://www.tko22.com/Section4.html

Also need the DonnyFl 1/2 x 20 adapter:

https://donnyfl.com/collections/adapters/products/nova-vista-liberty-1-2-x-20-a50

[RichH]

This seems to be the best deal going and I think he offers a GTA coupon code for like 10% off. For under $22 how could you go wrong if it even quiets it just a little? And it adds under 2". Adding 7" would be a deal breaker for me.

https://www.airgununiverse.net/wp/store/aspen-liberty-freedom-and-avenger-shroud-enhancement-kit/

[Wayne52]

My Liberty does great with just a spring and a scotch brite pad upfront. Low tech but works great, idea came from  Dave ezman.

Tom I'll probably go that route because the gun is long enough as it is.  I won't be shooting mine out in the back yard anyway

[avator]

Is the gun really that loud?

[Wayne52]

It's not super loud but loud enough so a squirrel or other critter will know where the shot is coming from.

[avator]

Bought 2 extra mags from PA and that bipod from the video from Amazon.

[mrbulk]

This is what sold me on Geoffk's baffle design, note the air stripper cones and vent slot patterns, yet it disappears completely down into the barrel shroud for no increase in length (this particular one is for Hatsans, the ones for the Avenger/Liberty will be shorter).

Mine will be here Tuesday, same day as my gun!

[mrbulk]

For Avenger/Liberty -

[Wayne52]

I was out in the woods with mine again today, darned thing is one heck of a shooter.  I was using my 26 grainers today shooting those about 880fps. The mags are working perfect now.

[Ironman482]

Haji has the air stripper/baffle stak back in stock for the .25 ordered mine this morning, that with the donny tanto should be mouse fart quiet,  think I'll crown the muzzle while I have it apart to drill the shroud  polish the barrel again and paint the stock with plastic dip camo and fill the butt stock with foam, maybe upgrade the scope at the same time

[Ironman482]

I was out in the woods with mine again today, darned thing is one heck of a shooter.  I was using my 26 grainers today shooting those about 880fps. The mags are working perfect now.

my mags were very tight when new ,I didn't do anything to them ,now after 500+ rds they are just a little tight and its not the barrel sticking out to far ,they were just oversized a little,  I  like them the way they are now ,not loose like my gauntlet.

[Dan H]

Bought 2 extra mags from PA and that bipod from the video from Amazon.

Bill do you have a link to the Amazon bipod ?  you just cant go wrong with what Rick uses on the guns ... and his shooting is second to none , thats why i always look up his channel for the guns I am interested in to see how accurate they really can be ... 

My avenger .25 is on the UPS truck to be delivered today , Randy has it set up requiring signature , so I have to stay here till it arrives ,I had to run to the lumber yard earlier ,but no notice so I did not miss UPS yet so its back to work on the new stair case on my second story deck till UPS gets here ...