Author Topic: AV Avenger (Read 28296 times - 1 votes)
)

Wayne52 · « **Reply #240 on:** August 16, 2020, 01:44:08 AM »

Quote from: Joe Kid on August 16, 2020, 01:31:16 AM

Quote from: Wayne52 on August 13, 2020, 12:45:35 AM
I won't order baffles on ebay anymore simply because the last I ordered for my Liberty did absolutely nothing for the gun.
Wayne,
I wish I would have read this before I ordered my baffle off Ebay. No effect what so ever.
You know, I, and I am sure, as well as all of the other GTA members, Really appreciate your posts. Thanks!

Thanks Joe and speaking of the devil I just uploaded a video clip shooting at 35 yards with my Avenger .25, the regulator is set to 1900psi and I'm shooting my 26 grainers, it can give you an idea of how loud they are out in the woods.

Fate · « **Reply #241 on:** August 16, 2020, 07:46:29 AM »

Wow Wayne! That's definitely not backyard friendly in my neighborhood.

OTmachine · « **Reply #242 on:** August 16, 2020, 03:18:34 PM »

Wayne, Thanks for the video. That is about the same as my .25 Avenger sounds. Like my nail gun, which is acceptable in my neighborhood. Sending the baffle back to Ebay. Refund okayed.

Norcal · « **Reply #243 on:** August 16, 2020, 04:03:48 PM »

Quote from: Joe Kid on August 16, 2020, 03:18:34 PM

Wayne, Thanks for the video. That is about the same as my .25 Avenger sounds. Like my nail gun, which is acceptable in my neighborhood. Sending the baffle back to Ebay. Refund okayed.

Was that baffle from Geoffk or another 3D manufacturer?

OTmachine · « **Reply #244 on:** August 16, 2020, 05:52:50 PM »

Another vendor. It was wrong in a lot of ways IMO.

Ironman482 · « **Reply #245 on:** August 16, 2020, 06:36:26 PM »

My air stripper / baffel stak from Haji Moto should be here tues ,I'll do a review on it after and post ,I have the dfl tanto on it now but knocked it over now it is just a little bit out of kilter, may have to see if one of the nova freedom's shrould will interchange. The threaded end is a little belled out from the adapter and moderater getting wacked. No pellet strikes that I can see.

scratchnv · « **Reply #246 on:** August 16, 2020, 06:58:22 PM »

Hey Ronald, I measured the shroud off one of my Nova Liberty's and it's an exact fit to my 22 and 25 Avengers. I'm pretty sure the Freedom and Liberty use the same shroud so you should be good.

avator · « **Reply #247 on:** August 16, 2020, 07:03:01 PM »

The 6.0 lb weight was one of the attractions to this gun for me. I'm not interested in a wood stock that would likely change that.

gendoc · « **Reply #248 on:** August 16, 2020, 07:17:49 PM »

Quote from: avator on August 16, 2020, 07:03:01 PM

The 6.0 lb weight was one of the attractions to this gun for me. I'm not interested in a wood stock that would likely change that.

my exact feelings toward a wood stock ^^.........

Ironman482 · « **Reply #249 on:** August 16, 2020, 07:53:32 PM »

Quote from: scratchnv on August 16, 2020, 06:58:22 PM

Hey Ronald, I measured the shroud off one of my Nova Liberty's and it's an exact fit to my 22 and 25 Avengers. I'm pretty sure the Freedom and Liberty use the same shroud so you should be good.

yeah I just cked too looks to be the same, I 'm gonna plasti dip my stock and krylon the shroud and air tube this week when all the parts come in . That solid black has got to go.lol

scratchnv · « **Reply #250 on:** August 16, 2020, 09:27:23 PM »

Ronald, can't wait to see how the plasti dip turns out. Keep us posted.

avator · « **Reply #251 on:** August 17, 2020, 08:02:16 AM »

Tracking says mine is loaded on the truck for delivery today.

Wayne52 · « **Reply #252 on:** August 17, 2020, 08:45:01 AM »

Bill if it reads 2900psi on the reg see what it's doing with heavy pellets, you'll really be surprised I'm sure.

avator · « **Reply #253 on:** August 17, 2020, 09:54:15 AM »

I have a feeling I will be surprised. Once it settles in I'll turn it down for better shot count and accuracy.

Wayne52 · « **Reply #254 on:** August 17, 2020, 10:44:42 AM »

I just adjusted the trigger on mine and all I can say is wow can you ever make them nice, very nice trigger on them. I'm also wondering if there's an exploded view of these guns available

elguapo99 · « **Reply #255 on:** August 17, 2020, 11:02:24 AM »

I adjusted the trigger on mine a few days ago and was able to get the pull weight down to 1lb-12oz and the pull weight adjustment seemed to remove most of the 2nd stage creep. I'm happy with the trigger now.

Ed24 · « **Reply #256 on:** August 17, 2020, 11:29:31 AM »

I have the .22 Had the reg at 2900 and the hammer at 5.5 turns shooting JSBs 25gr around 860s. I tuned the gun down this weekend to 2000 and 3.5 on hammer. Shooting 25gr around 775. Was making one big hole with a full mag at 50yrds. Gun seems happier at this setting. My shot count also went from around 45 shots on the reg to 80ish.

I'll do an exact shot count at this setting in the next few days and will post! I'm thinking of ordering a .177. Has anyone done any slug testing with the .177???

avator · « **Reply #257 on:** August 17, 2020, 01:24:24 PM »

Betty Lou just called and said I had a package waiting for me at home..... woohoo, let the games begin.

avator · « **Reply #258 on:** August 17, 2020, 03:34:02 PM »

Had to go to the post office on my lunch break to send off a couple packages. By the time I got home I had about 15 minutes to eat a sandwich and head back to work. I opened the box and pulled the gun out and had a quick look for any obvious signs of damage. I couldn't find any. Then I looked at the gauges. The fill gauge was at 3k ish and the reg was at 2900 ish. I put a random .25 pellet in the single shot tray and fired the gun out the back door. The gun seemed to function flawlessly. It didn't sound any louder to me than an unmodified .22 SynRod.
That was all the time I had. I petted Betty Lou on the head and kissed Rambo on the cheek and headed back to work.

OTmachine · « **Reply #259 on:** August 17, 2020, 05:27:28 PM »

I had some time today, so I adjusted my Avenger .25 cal a little per other members results.
Thanks for all of the Great posts on this.
3400 psi fill
Set reg to 2300 psi. JSB Kings 33.9 gr
With hammer spring backed out all the way first eight shots at 700 fps average
1 turn in took fps to 728 fps average. 1 more turn in went to 785 fps average.
Backed off 1/2 turn on hammer spring and did 18 more shots at 777 fps average for a total of 32 with gun just dropping off the reg.
Target at 15 yards with mediocre scope.
Could probably drop it down some more

Thank you to our advertisers!

AV Avenger

Author Topic: AV Avenger (Read 28296 times - 1 votes) )

Author Topic: AV Avenger (Read 28296 times - 1 votes)
)