What airgun related did you do today?

[splitbeing]

Spent a while with the Urban, tightening the tune.  I am glad I did not sell this gun.  It is a great gun. I do not have another pistol stock in my regular rotation.

After the sling malfunction way back when, I figured I'd put a quality tangfolio on it, whose accents fit the bronze and metal of the fill port sans dust cover avec fill probe.  The blacking out I did back when still looks great.

After much testing and tweeking with CPHPs, I landed on the following fill, spread, and energy.  The fill is 2000 down to 800 psi.  The shot count is 60+ shots within an ES of 40, which amounts to six magazines reliably per fill.  The range is 650s to 680s over those shots, averaging to a 14 fpe tune. 

The CPHPs did very well and I have lots of them,  i put the Urban away back when because I was getting too many fliers with the CPHPs. Turns out it was a bad tin.  As soon as I finished those early in this set up, the number of fliers went way down.  There are still fliers and sometimes they go a couple inches off!  But there were enough easy dime and now and then small button size 10 shot groups (sometimes with a flier) to open the door to my greater mission: shooting all these CPHPs!

[Scrambler82]

Shot up some squirrels !

Ordered new risers.

[bear air]

Long time no see Scrambler82. I had stuff scattered everywhere in the gun room so I picked all that up and then I decided to swap cases between the m50 pistol carbine and my hp max 45.

[Scrambler82]

I'll be adding 3/4" risers to my Scope Mounts.
I have a few months old FX Dynamic Express with the rear bottle.
Not a problem, bottle  in the rear, except for one, using the UTG High Risers for the Scope Mounting doesn't allow me a quick sight in.   I need to press my cheek almost into the tank before getting a full view through the scope.   I purchased the 3/4" UTG Extended Risers and will see how they work out.
Hopefully all will be tight, no wobbles, and I gat get a full view without a lot of moving around.

Ltr
GOD Bless

[buellm2]

Got the 1968 HW 35 fixed up and shooting.   Replaced broken trigger box pin, sear bushing and breech seal.   Old breech seal was leather, new one is urethane or similar plastic.    Piston seal was leather  but just cleaned it up and treated it with neats foot oil.    The breech seal was rotted and crumbling.   The piston seal seemed to be in pretty good shape.   Reassembling the record trigger was not much fun but eventually, after a lot of fiddling around, I got it done using a couple rubber bands to hold things in place.   I still think the stock could look better.   I only cleaned it with some Formbys antique furniture cleaner.    I don't plan to refinish the stock,  I like some patina.   Probably will mount a scope tomorrow.  It only dieseled a few times before settling down.

[Back_Roads]

 Finished up on  rebuilding an old dDaisy Mod. 25 and gave it a test run 50 rounds later it seems to be back to normal.


 I then rewarded myself by installing a scope mount and a nice 1" tube dot sight on my Crosman 100, and sighted it in and ran a few different pump #'s over the Crony. seems to be a small ragged hole developing in one place on the target the dot covers so all good, better than I was doing with the dish sight. Thanks   Jon AKA eeler1
 

[splitbeing]

Let's shoot some gta targets with the crosman 100s! Or crosman 101s!

[Madd Hatter]

I installed a Oring in my impact that is suppose to eliminate the stickion on the valve rod. Having tested it yet so we'll see 🤔

[kbstingwing]

Bought some pellets on Amazon, Benji's .25's

[Whirligig]

I blasted about 150 empty clam shells to smithereens using a Beeman underlever PCP air rifle.

[Blowpipe Sam]

Determined that the .25 caliber Hatsan Flash-R QE does not care for slugs.

[avator]

Not alot... been up to our necks into whipping our home into shape.

[buellm2]

I mounted a scope onto my HW35.   Then I went out for some test firing.    Then I discovered that I mounted it 90 degrees off.   Serious doofus screwup.   But I have a pretty good excuse.    I've been on serious painkillers for over a week.   I should have waited a couple more days.    If I'm not too drugged up tonight I'll spin it around.   At least the doofus error made me laugh,,, at myself.

[Tater]

I think you mean 180 degrees Ern. 

[buellm2]

I mounted it with the windage and elevation dials reversed.  Maybe I'll pay attention next time.   

[avator]

I get it... the elevation turret was rotated to 9 o'clock.

[buellm2]

I get it... the elevation turret was rotated to 9 o'clock.

Yep, that's the kind of error that makes you look like a dummy.

[Back_Roads]

I get it... the elevation turret was rotated to 9 o'clock.

Yep, that's the kind of error that makes you look like a dummy.

That is a hack for very windy conditions, where some scopes have more elevation than windage clicks

[buellm2]

I get it... the elevation turret was rotated to 9 o'clock.

Yep, that's the kind of error that makes you look like a dummy.

That is a hack for very windy conditions, where some scopes have more elevation than windage clicks

  If it was that windy, I would take it as a sign from above to shoot some other day.