Author Topic: DAR Dynamic .177, .22, & .25 on Clearance at SG (Read 9970 times))

Wayne52 · « **Reply #40 on:** August 28, 2018, 01:54:47 AM »

Greg when I was searching in the O-Ring Store I didn't see anything offered in Viton that size, I don't even know if they carry the Viton's but I'd like to get some myself.

Wolverineshooter · « **Reply #41 on:** August 28, 2018, 07:02:35 AM »

https://www.theoringstore.com/index.php?main_page=product_info&cPath=367_5_9&products_id=333

Is this the one?

Wayne52 · « **Reply #42 on:** August 28, 2018, 07:52:07 AM »

That looks like the one Greg, well I couldn't help myself and decided to get one in .22 as well and figured I might as well get the sale deal, also used a free shipping code of SH2713

Rat Sniper (AKA: PaulT58) · « **Reply #43 on:** August 28, 2018, 09:38:43 AM »

Quote from: Wayne52 on August 28, 2018, 07:52:07 AM

That looks like the one Greg, well I couldn't help myself and decided to get one in .22 as well and figured I might as well get the sale deal, also used a free shipping code of SH2713

Congrats Wayne! You got the complete set now! I'm still contemplating the .22, so I'm really interested in hearing your thoughts.

Wayne52 · « **Reply #44 on:** August 28, 2018, 10:42:23 AM »

Paul I'll be feeding it a steady diet of the boat tails I'm sure. Hopefully I don't have any poppet problems like some of you guys have with this one. My other two are still working fantastic yet.

Rat Sniper (AKA: PaulT58) · « **Reply #45 on:** August 28, 2018, 10:47:45 AM »

My .25 is scheduled for delivery today, I’ll be replacing o-rings and giving it a good once over before I even attempt to fill it with air. I’m also hoping it has the conical spring in the valve, I think that was part of the problem I initially had with my .177.

Quick question, is the end cap on the barrel shroud the same size and threads on both the .177 and the .25? I have a buddy machining me an adapter to add and LDC to the .25 to quiet the bark. I sent him the dimensions from the .177 end cap and am hoping they are the same!

Wayne52 · « **Reply #46 on:** August 28, 2018, 11:06:04 AM »

My other two don't have the conical spring so I really don't expect this one to be any different, I figure the stock that Sportsman's Guide has are probably all from the original batch of these guns and I'm sure that's why they're selling them at these bargain prices, also to make room for another probably better batch of them. I seriously doubt they'll be putting more time and labor into them before they ship them at this price. Once I put the good airtube and regulator o rings in it I'll also open up the regulator some while I'm at it. My 177 the regulator had written in sharpie 103 so I figure when they tested the regulator at the factory it was probably set for 103 bar before installing in the gun. I'll try taking more pictures of the internals of this one before I reassemble it and shoot.

BigMike1 · « **Reply #47 on:** August 28, 2018, 11:12:06 AM »

Mine did have the conical spring and I think i was one of the first few to get one! Ryan recalled mine and its been gone a couple weeks and havent heard anything back from them:( I miss it !

Rohmpm · « **Reply #48 on:** August 28, 2018, 11:21:23 AM »

Quote from: Wolverineshooter on August 28, 2018, 01:47:41 AM

Quote from: Rohmpm on August 27, 2018, 11:37:18 PM
My .25 will be here Wed. Already received my Viton 90 orings.

Great! Let us know how it goes.

You got the O-rings from the o-ring store?

Got them on Amazon. OR90BRNVI117X25. They are from www.sterlingseal.com
732-918-8004

Wayne52 · « **Reply #49 on:** August 28, 2018, 11:25:53 AM »

Paul I'm sure the threads are the same but the openings are different for the pellet to go through I noticed.

Rat Sniper (AKA: PaulT58) · « **Reply #50 on:** August 28, 2018, 11:31:23 AM »

Quote from: Wayne52 on August 28, 2018, 11:25:53 AM

Paul I'm sure the threads are the same but the openings are different for the pellet to go through I noticed.

Good, thanks! I figured the .25 had to have a larger opening, I don’t think a .25 pellet would fit through the hole in the .177 end cap.

Wolverineshooter · « **Reply #51 on:** August 28, 2018, 11:33:40 AM »

Quote from: Rohmpm on August 28, 2018, 11:21:23 AM

Quote from: Wolverineshooter on August 28, 2018, 01:47:41 AM
Quote from: Rohmpm on August 27, 2018, 11:37:18 PM
My .25 will be here Wed. Already received my Viton 90 orings.

Great! Let us know how it goes.

You got the O-rings from the o-ring store?

Got them on Amazon. OR90BRNVI117X25. They are from www.sterlingseal.com
732-918-8004

Thanks Billy!

Wolverineshooter · « **Reply #52 on:** August 28, 2018, 12:02:46 PM »

I have not ordered yet but planning to do so, first getting an DAR177 as I have no 0.177 PCP yet. I may get the DAR22 and DAR25 as well.

For O-rings, other than the ones for the regulator that should be 117 duro 90, how about the other O-rings? Are they better to be buna 70 or buna 90?

I would like to place just one order of O-rings and hopefully to cover all the future needs for all three calibers, even though I do not have the rifles yet.

Wayne52 · « **Reply #53 on:** August 28, 2018, 12:22:27 PM »

Greg I used BunaN 70Duro on the ends of the airtube and BunaN 90Duro on both my guns, still all working good. The only o rings other that I replaced was one for the barrel band (installed bad from factory) and a breech o ring which was my fault having things turned up way too far and blowing it out of the barrel doing a chrony test.

Wolverineshooter · « **Reply #54 on:** August 28, 2018, 12:28:47 PM »

Quote from: Wayne52 on August 28, 2018, 12:22:27 PM

Greg I used BunaN 70Duro on the ends of the airtube and BunaN 90Duro on both my guns, still all working good. The only o rings other that I replaced was one for the barrel band (installed bad from factory) and a breech o ring which was my fault having things turned up way too far and blowing it out of the barrel doing a chrony test.

Thanks Wayne. So both 70 and 90 should be fine in other places?

Wayne52 · « **Reply #55 on:** August 28, 2018, 01:54:08 PM »

Great I've only used the 90duro on the regulator so far, everything else has been 70duro.

Wolverineshooter · « **Reply #56 on:** August 28, 2018, 04:22:15 PM »

Ordered both DAR177 and DAR25 - felt so guilty now. Hopefully they are good quality and warranty still exist. Fingers crossed.

WeaselCat · « **Reply #57 on:** August 28, 2018, 07:49:21 PM »

The 177 arrived today. Wow, it's a good looking gun!
The o-rings showed up at the same time. Fortunately, it's holding air at 2000psi. Ran one mag through it to confirm function. So far so good.

Wolverineshooter · « **Reply #58 on:** August 28, 2018, 08:31:06 PM »

Good to hear. Are you going to tune it up?

WeaselCat · « **Reply #59 on:** August 28, 2018, 09:58:20 PM »

Just going to shoot it as-is for now. Will eventually tune for more power as long as I can get at least 40 consistent shots. My plan may be accelerated in the event of unplanned decompression.

Mounted a Bushnell Trophy Xtreme 30 4-16x. Had enough time before dark for an 8 shot 30 yard group with JSB Monster 13.43 at just a fuzz over 1/4".

The only problem is the scope windage adjustment is maxed but still hitting 8" right at 30 yards.

Thank you to our advertisers!

DAR Dynamic .177, .22, & .25 on Clearance at SG

Author Topic: DAR Dynamic .177, .22, & .25 on Clearance at SG (Read 9970 times))