Author Topic: hand pumps are now 72.00 shipped (Read 26043 times))

betapotato · « **Reply #60 on:** February 26, 2017, 05:17:23 PM »

Quote

So you will need an BSPT female end BSPP male end adapter to make use of all the quick release adapters.

Which adds more to the cost

Rob M · « **Reply #61 on:** February 26, 2017, 05:22:03 PM »

Quote from: sactargetshooter on February 26, 2017, 03:36:11 PM

Quote from: Donut 2994 on February 26, 2017, 02:41:26 AM
If they don't fit they are fairly easy to replace (I think)

Yes and no. Yes, the quick release portion is easy to replace, Air Venturi markets some, and paint ball supplies have some, too. However, almost all American quick release adapters use BSPP threading. The pump, being Asian made, uses BSPT threading. So you will need an BSPT female end BSPP male end adapter to make use of all the quick release adapters.

is it cheaper to get an ebay hose with the connector?

Bentong · « **Reply #62 on:** February 26, 2017, 11:49:52 PM »

Got this spare for the spare...best price on eBay. Don't know when I will eventually use it. Each pump got it's own o-rings and other stuff to rebuild it like 4X
http://www.ebay.com/itm/121988674236?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

The Chinese pump I am currently using connects with no leak and has positive lock up to my 2 HPA bottles, spare HPA regulator, QB78 PCP, maximus and varmint PCP.

sactargetshooter · « **Reply #63 on:** February 27, 2017, 02:32:26 AM »

Quote from: Bentong on February 26, 2017, 11:49:52 PM

Got this spare for the spare...best price on eBay. Don't know when I will eventually use it. Each pump got it's own o-rings and other stuff to rebuild it like 4X
http://www.ebay.com/itm/121988674236?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

The Chinese pump I am currently using connects with no leak and has positive lock up to my 2 HPA bottles, spare HPA regulator, QB78 PCP, maximus and varmint PCP.

Good find! Just ordered one in as a back up to a back up

.

Rob M · « **Reply #64 on:** February 27, 2017, 09:52:31 AM »

very good find for that price.. !!

sactargetshooter · « **Reply #65 on:** March 02, 2017, 04:26:05 PM »

Quote from: sactargetshooter on February 27, 2017, 02:32:26 AM

Quote from: Bentong on February 26, 2017, 11:49:52 PM
Got this spare for the spare...best price on eBay. Don't know when I will eventually use it. Each pump got it's own o-rings and other stuff to rebuild it like 4X
http://www.ebay.com/itm/121988674236?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

The Chinese pump I am currently using connects with no leak and has positive lock up to my 2 HPA bottles, spare HPA regulator, QB78 PCP, maximus and varmint PCP.

Good find! Just ordered one in as a back up to a back up .

The new hose arrived today and it fits the pump. The quick release also fits all the male adapters, but it was tight. Well, at least it worked. I just used the pump to charge my Guppy from 3500 PSI to 3600 PSI. That was a good work out, but the pump was not hard to pump even at 3500 PSI.

All in all, this is a good pump for the money. I just wish quality control is a little better, esp. with the quick release adapter!

Rob M · « **Reply #66 on:** March 02, 2017, 04:34:32 PM »

thats really great to hear.. i thought the benji pumps were pretty taxing from 2500 up

sactargetshooter · « **Reply #67 on:** March 02, 2017, 05:00:42 PM »

Quote from: Rob M on March 02, 2017, 04:34:32 PM

thats really great to hear.. i thought the benji pumps were pretty taxing from 2500 up

As they say, YMMV! For reference, I am 5'5" and weigh 177lb, not exactly fit or active. My doctor said I am "borderline obese". I guess this means I can use HPA pumping as a form of exercise!

That said, I do have to put my entire weight on the handle and rely on momentum to get to the bottom of the stroke. 30 strokes and I need a short break at 3600 PSI!

Rob M · « **Reply #68 on:** March 02, 2017, 07:03:01 PM »

i weigh about the same , think i had to drop my weight on the benji about 2800 ish.. I barely remember

lennyk · « **Reply #69 on:** March 03, 2017, 12:57:51 AM »

I received mine today, was missing the spare oring set, contacted the seller about it.

Tried it out, gun was at about 2600, pumped it to 3000
Was not that bad actually. I am 5'10 and 178
Just using body weight by dropping knees to drop body straight down versus bending over it like how I normally pump my bike.

Techie · « **Reply #70 on:** March 03, 2017, 01:19:33 AM »

I bought one about a month ago and it hooked up to my Benjamin Maximus with no problem. I removed the handle and put a small piece of air filter foam over the intake port that is at the top of the tube, then screwed the handle back down on it. Figure this will keep dirt out of the tube.

lennyk · « **Reply #71 on:** March 03, 2017, 08:49:13 PM »

Seller sent a reply but it appears they don't have spare oring sets available
They seem to get them as a complete package from the China factory with the extra oring set included.

douglasr · « **Reply #72 on:** March 04, 2017, 10:41:34 AM »

eBay has one for $60 now.
Add http here and then //m.ebay.com/itm/4500psi-PCP-Airgun-Hand-Pump-High-Pressure-Hand-Pump-GDK-PCP-for-Airgun-Tire-/371804023267?_trkparms=aid%253D222007%2526algo%253DSIC.MBE%2526ao%253D1%2526asc%253D20150519202348%2526meid%253D30074183b849484589e622e045f50d6f%2526pid%253D100408%2526rk%253D3%2526rkt%253D4%2526sd%253D121988674236&_trksid=p2056116.c100408.m2460

packard8 · « **Reply #73 on:** March 04, 2017, 01:04:50 PM »

Quote from: douglasr on March 04, 2017, 10:41:34 AM

eBay has one for $60 now.

Here's the link:

http://www.ebay.com/itm/371804023267

Note that you have to add $15 shipping for a $72 total. I bought a Barska when Woot had them for $65 delivered, and so far so good.

Rob M · « **Reply #74 on:** March 04, 2017, 02:41:33 PM »

69.29 free shipping

http://www.ebay.com/itm/3-Stage-Air-Rifle-PCP-Gun-Hand-Pump-Stirrup-Charging-Gas-Filter-Gauge-Valve-Hose-/322389050309?hash=item4b0fe283c5:g:cEoAAOSw44BYeFU2

Citypestsniper · « **Reply #75 on:** March 04, 2017, 06:43:32 PM »

Quote from: Rob M on March 04, 2017, 02:41:33 PM

69.29 free shipping

http://www.ebay.com/itm/3-Stage-Air-Rifle-PCP-Gun-Hand-Pump-Stirrup-Charging-Gas-Filter-Gauge-Valve-Hose-/322389050309?hash=item4b0fe283c5:g:cEoAAOSw44BYeFU2

Anyone tried making an offer for 65$ I am wondering how cheap theses will go. I really can't see why anyone would buy a Benjamin pump with these at half the price. I got one of the pumps from that woot deal awhile back but these are cheaper than that was.

Rob M · « **Reply #76 on:** March 04, 2017, 07:07:45 PM »

they have the best offer open for a reason i guess. These pumps from what i gather are wayyyyyyy better than the benji and airfoce pumps.

Taekwondoguy · « **Reply #77 on:** March 06, 2017, 02:15:31 AM »

I bought one of couple months ago and I think check valve is clogged up but I can't find where it is and no diagram came with it. Pump will go down and when I try to pull up it wants to not so good handle back down and won't build any pressure in rifle. Anyone got suggestions?

lennyk · « **Reply #78 on:** March 06, 2017, 07:06:12 AM »

youtube "3 stage pcp pump"
there are a some vids from the manufacturers
you may need to pause the video as the guy goes rather quickly.

one thing in the vid i saw was that it appears to be filled with oil as he poured it out.

sactargetshooter · « **Reply #79 on:** March 06, 2017, 11:17:58 AM »

Quote from: lennyk on March 06, 2017, 07:06:12 AM

youtube "3 stage pcp pump"
there are a some vids from the manufacturers
you may need to pause the video as the guy goes rather quickly.

one thing in the vid i saw was that it appears to be filled with oil as he poured it out.

Not sure whether this is the right one, don't have enough time to watch the whole thing through. But it seems related.

Thank you to our advertisers!

hand pumps are now 72.00 shipped

Author Topic: hand pumps are now 72.00 shipped (Read 26043 times))