Author Topic: The lightest bullpup i ever shouldered (SPA P15) (Read 36536 times))

Nolanh93 · « **Reply #240 on:** September 13, 2017, 05:41:28 PM »

Anyone that has experience with these would you buy this or a kral puncher breaker. I have been wanting a bullpup and I was planning on getting a pucher breaker through Troy Hammer to avoid it failing on me, as they have had many issues. But if these are trustworthy, durable, and accurate to about 75yds or so out of the box I'll just get one of these when i can.

colorider · « **Reply #241 on:** September 13, 2017, 07:22:02 PM »

^^^^^^^^^^^^^
Timely post as I am in the exact same mind set right now after seeing the review of that Troy Hammer Puncher Breaker.

keithd · « **Reply #242 on:** September 13, 2017, 07:32:53 PM »

I'm thinking you may have a tie here

stony30 · « **Reply #243 on:** November 04, 2017, 05:47:55 PM »

Anymore insight on this bullpup ? Main differences vs the sp12 besides the side lever etc. ?

thelast88 · « **Reply #244 on:** November 05, 2017, 05:24:15 AM »

This was on first page:
Unlike the P12 or P10, it has
265 cc tube
Baffles are in the shroud
Holes in the rear of shroud
Trigger is slightly different
Shotgun type trigger safety
Valve assembly is not separate (unblock valve)
Regulator design is different ( compare to Chinese regulator)
Approximately 5inch shorter
Lighter (2.1 kg)
Side liver
Hammer is slim, cylindrical in shape resembling to BSA R10, and much more lighter
No seals on pellet probe ( a seal inside the barrel)
Barrel has two seals
Two screw on barrel/tube clamp instead of four
11mm scope rail
Indent on barrel for alignment with TP ( a grub screw under the scope rail is holding the barrel)
9 shots mag (fills like FX mag).

I'd also said that the hammer system is much better than P12, if you don't do any mods on P12. I have made external SSG on my P12, so its much better that the original.

stony30 · « **Reply #245 on:** November 07, 2017, 08:49:46 PM »

Price difference from the p12? Does the p12 have a regulator? I'm torn between this and the hatsan bull master. I have the gladius presently. Thanks

smythsg · « **Reply #246 on:** November 07, 2017, 09:01:18 PM »

Joe the P12 is not regulated out of the box, but a Huma is available. MrodAir has the P12 on sale right now for $399.00. I have owned one for a couple years now and it has been bullet proof, very accurate shooting 21 gn Baracuda pellets at 40 ft lbs, and very well balanced in the field for all day hunting. (I'm sure you know it is single shot)

stony30 · « **Reply #247 on:** November 08, 2017, 02:00:31 AM »

Ok thanks Steve

stony30 · « **Reply #248 on:** December 26, 2017, 06:36:55 PM »

Any of you guys familiar with a Tula baffle set for this bullpup

jarmstrong · « **Reply #249 on:** December 26, 2017, 10:46:02 PM »

I don't know about this TULA set up
But if it threads on to the barrel , the threads on P-15 are 12mm 1.25 threads

stony30 · « **Reply #250 on:** December 27, 2017, 10:32:03 AM »

Do you know what the threads are on the endcap ? Or the id of the threads of the shroud and type ? I'd really like a ldc/moderator that could thread onto the shroud in place of that endcap to still use the existing baffles.

Wayne52 · « **Reply #251 on:** December 27, 2017, 11:30:00 AM »

Maybe an LDC for the Dominator will work, I don't have a spare to sell but I'm sure they're inexpensive direct from SPA but the shipping from China is expensive.

stony30 · « **Reply #252 on:** December 27, 2017, 11:33:09 AM »

Hmm... Thanks

Wayne52 · « **Reply #253 on:** December 27, 2017, 11:43:33 AM »

Quote from: stony30 on December 27, 2017, 11:33:09 AM

Hmm... Thanks

I just compared the PDF for both the M16 and the P15, they both share a lot of the same parts but it don't look like the LDC from the M16 will work on it.

ThisGuy · « **Reply #254 on:** December 27, 2017, 01:08:37 PM »

I can't post the link but Donnyfl makes an adapter to 1/2 x 20 unf for the P15.

stony30 · « **Reply #255 on:** December 27, 2017, 01:12:23 PM »

Thats to thread on the barrel right ? I want to keep the shroud and existing baffles also.

jarmstrong · « **Reply #256 on:** December 27, 2017, 01:46:16 PM »

Stony, did you go to Donnyfl web site and look?

The adapter screws on to (into) the shroud and has threads for a LDC to screw on past the shroud

stony30 · « **Reply #257 on:** December 27, 2017, 07:31:17 PM »

Do you guys know what size that grub screw is on the side of the gun to remove the shroud ? I assume that's what it is for.

stony30 · « **Reply #258 on:** December 27, 2017, 07:34:26 PM »

Yup I figured that out. The problem I am thinking I may have if I just do an adapter is that I was told by my ldc designer that on .25 caliber rifles the accuracy may suffer. Opinions ??

jarmstrong · « **Reply #259 on:** December 27, 2017, 08:11:35 PM »

M4x6 SET screw 4mm diameter x 6mm long use a 2mm allen wrench
30 years in a large power plant as a mechanic and I never heard of a grub screw till I started reading airgun forums.
The subjects of the queen say grub screw, they also call a flashlight a torch, the car hood is a bonnet, and the trunk is a boot
ain't that a hoot
your accuracy will only be affected, if the shroud does not hold the LDC centered with the bore. Then it will clip the pellets

Thank you to our advertisers!

The lightest bullpup i ever shouldered (SPA P15)

Author Topic: The lightest bullpup i ever shouldered (SPA P15) (Read 36536 times))