Author Topic: Under Lever's - Crosman wants your input (Read 46988 times))

RedFeather · « **Reply #80 on:** March 29, 2011, 06:03:38 PM »

And two pair of pants, LOL!

You guys don't ask for much. If they buildit to Whiscombe specs and QC, no one will be able to afford it. Decent trigger, good sights (how about a real factory peep?) and non-FT stock. Let's face it, the FT crowd can restock it to their measurements anywho. Other's will actually want to take it into a real hunting field. Nitro piston would be nice. Better smooth than over-the-top power. And, please, no fake brake that looks like an attachment to my shop vac. Cheers!

yote300wsm · « **Reply #81 on:** March 29, 2011, 06:07:13 PM »

Imho, I think that we have run this thread into the ground.

DMikeM · « **Reply #82 on:** March 29, 2011, 07:42:20 PM »

Underlever, comes with a spare lower power spring. No need for a compressor. Wood stock not thumbholes please. Something that will put out a decent amount of FPE at higher altitudes 13fpe or better. Weaver Rail, don't care if it has open sights or not. Carbine and shrouded. No plastic. Not bulky like the B40, TX200 or Pro Sport.

RedFeather · « **Reply #83 on:** March 29, 2011, 08:00:09 PM »

Two springs? That would run contrary to most factory warranties.

Guys, keep it real. This isn't Santa Claus who's asking. They have to market these guns to more than forum members.

North Pack · « **Reply #84 on:** March 29, 2011, 08:17:43 PM »

"Imho, I think that we have run this thread into the ground." .... yote
.
Ya' think??? ...

DMikeM · « **Reply #85 on:** March 29, 2011, 10:11:34 PM »

Quote from: RedFeather on March 29, 2011, 08:00:09 PM

Two springs? That would run contrary to most factory warranties.

Guys, keep it real. This isn't Santa Claus who's asking. They have to market these guns to more than forum members.

Opps didn't think of that. Good catch.

NickB79 · « **Reply #86 on:** March 30, 2011, 04:15:46 PM »

Crosman, if you're still watching this thread, here is my suggestion.

Contact Retay Arms of Turkey and import their Troy 100X: http://www.retaygun.com/UList.aspx?KID=15

Make sure you get the model with the integrated Weaver base, replace the spring power plant with your excellent Nitro Piston technology, and stamp "Crosman" on the side. Offer it in .177 and .22 cal, retail it for under $300, and I will buy one in a heartbeat.

AirScopes · « **Reply #87 on:** March 31, 2011, 08:53:15 AM »

Quote

if you're still watching this thread, here is my suggestion. Contact Retay Arms of Turkey and import their Troy 100X...

I'm trying NickB79! I have a few coming soon. Obviously not NP, but I do need to sell them after testing to try and break even...

RedFeather · « **Reply #88 on:** January 17, 2012, 06:29:54 PM »

Well, we finally see the results of our labors. The MAV 77. Sorry, but did you even bother to read the five pages of suggestions in reply to your query? Someone asked for a gun to compete with the TX200. Another for a gun to be made in USA. Yet another wished for a gun not as bulky as a TX. How about a good gun but not as expensive as an HW or Diana underlever? No one asked for a copy of the TX200, made in China if I am not mistaken. We have (or should say "had) that in the BAM40. Will this at least have some internal improvements? A Nitro piston, etc? And, with an MSRP of $530, maybe you should change your handle to DoublePrice.

uncle paulie · « **Reply #89 on:** January 17, 2012, 06:43:54 PM »

Easy Red, They might have another in the wings, better yet, they might be looking for testers! LOL

pv

RedFeather · « **Reply #90 on:** January 17, 2012, 06:49:07 PM »

Uncle Paulie, for over five hundred clams, those testers would be bigger fish than the one you're holding, LOL!

TOM aka critter99 · « **Reply #91 on:** January 17, 2012, 06:49:29 PM »

Crosman go back and rethink this pricing a $269.00 MSRP China B40 TX200 clone rebranded as a Benjamin for $530 is insane when the real deal TX200 is $569

TOM aka critter99 · « **Reply #92 on:** January 17, 2012, 06:55:46 PM »

I don't remember anybody wanting a Double priced China rifle??? LOL

TOM aka critter99 · « **Reply #93 on:** January 17, 2012, 07:20:48 PM »

AT $530 this will be a biggest flop of the year, quite the feat after a era of rebirth and growth...

I hope there will be some changes at Crosman or it is heading backwards

Rickey · « **Reply #94 on:** January 17, 2012, 07:30:54 PM »

Made in USA with a quality USA or German barrel.

TOM aka critter99 · « **Reply #95 on:** January 17, 2012, 07:48:58 PM »

anybody notice they have not open the Crosman Blog up for comments on the new models?

Crosshairs · « **Reply #96 on:** January 17, 2012, 10:14:28 PM »

Quote from: Doubletough on March 25, 2011, 05:29:03 PM

I'm not sayin' we are or we aren't, but we want to know your thoughts on under lever break barrel guns. What do you like, dislike, feature wish list....what would be your ideal under lever?

We're listening.

A free one.
Mike

Random Plinker · « **Reply #97 on:** January 17, 2012, 10:48:02 PM »

I've been resisting an underlever for some time, but at $530, I'm more likely to give the XS46U a try for $130.

I love my B26. Wonder if Crosman will be bringing out an R9 clone for $530 soon too? I liked the B26 better for under $200...

Kailua · « **Reply #98 on:** January 17, 2012, 11:21:15 PM »

Consistent quality control. Not a hit or miss in purchase of the same products. Oh a threaded muzzle for a

?? or a baffled shroud.

bobster · « **Reply #99 on:** January 17, 2012, 11:26:58 PM »

That's pretty lame to ask for input and then totally ignore all of it and just rebadge a chinese copy of an Air Arms gun. Then they ask just a bit less than the Air Arms price. They must think we airgun shooters are very dense.

Thank you to our advertisers!

Under Lever's - Crosman wants your input

Author Topic: Under Lever's - Crosman wants your input (Read 46988 times))

yote300wsm