ARH HW35 Kit

[jwg]

I just purchased a ARH HW35 Pro Tune Kit for my recently purchased (almost new) 1979 HW35 with leather piston seal.
I was wondering where exactly to apply the moly that was supplied in the kit? This 35 was a German "F" code gun. (6 ft/lbs) I read a lot about different kits and I think the ARH should be the best.

[anuthabubba]

This is good general springer tuning info.

http://www.network54.com/Forum/79537/thread/1240111527/The+Anatomy+of+a+Tune-

[JimL911]

The kit comes with tar not moly. I put a thin string at 3,6,9 and 12 o'clock. You don't need much with fitted guides. It will work around with use.

[jwg]

I also have his Moly but I guess I will stick to the tar.

Thanks, all for the great info.

[DanD]

I also have his Moly but I guess I will stick to the tar.

Thanks, all for the great info.

Use tar on the spring and moly on the piston and moving parts. I put  three smears around the piston- one right behind the seal, one around the middle, and one around the skirt. You can also use moly  on the ends of the spring and/or guides and washers where there is contact against the piston and rear plug.
Good luck!