mods for a crosman 760?

[bantam5s]

Hey everyone!        Are there any mods for a 760 that can be done without buying anything?   Like ways to make the trigger a little better and things like that.   ( it already has an m417 barrel in it)    I know a lot of people put a flat top piston in them and other things like that, but I like the 760 for what it is but just want to refine it just a little.        So does anyone got any ideas?

[rangerfredbob]

The trigger is easy to lighten once you get the receiver split, the trigger spring is behind the trigger, take a somewhat small flat screwdriver with about a 6" shaft and push on the forward leg of the spring until the spring bends, keep bending until the trigger is to your liking. If you want you can remove the metal piece behind the trigger which will let you decock it, just replace it with a washer to keep the spacing right.

[BillK]

Here is some more trigger info.
http://www.network54.com/Forum/275684/message/1320036096/760+Trigger+creepiness.

[nervoustrigger]

If you want to bring up the power for almost zero cost, you can shim the pump cup and stuff the piston like a 1377.  Lots of tutorials available, the one that I did is in my signature below (the 2289 link).

[bantam5s]

Thanks I may try to lighten the trigger, and one replace that peice with a washer so I can de-cock it.

[bantam5s]

I think I was able to lighten the trigger pull up a little, but I didnt like it without that peice so I put it back in ( im assuming that  the triggers gonna stay about the same with that peice in there)  anyway at least I tried .