Author Topic: Project Fury 20mm BIGbore. 3100FPE! (Read 86311 times - 2 votes)
)

Prouzy · « **Reply #360 on:** October 15, 2018, 06:36:04 PM »

Quote from: MJP on October 15, 2018, 05:26:57 PM

Season ends here in Finland, land of the crazy and thousand lakes.

I don't know if it's just me but the further from "sane" we get the more interesting it gets.
More materials to be ordered and parts to be made, there is more power to be found.

The way I see it, if it can be broken with one caliber it can be done with others also.

Stay tuned

Marko

LOL! Looking forward to it!

rintafile · « **Reply #361 on:** October 16, 2018, 02:06:27 AM »

Well need to pack pair of clean underwears when shoot that "thing" next time

MJP · « **Reply #362 on:** October 24, 2018, 11:54:06 AM »

Did fix one warranty cell phone case back at the season ending.
Forgot to post it here.

There is four shots in the middle hole, I first aimed at the same spot and thought the dispersion would do the rest, then I had to start aiming on different parts to get more holes.
Cant remember distance if it was 25m or 50m but it doesn't really matter here, it's just for fun anyway.

Marko

MJP · « **Reply #363 on:** February 03, 2020, 05:31:27 AM »

Lets dig this one up from the past, have been making drawings and calculations.
I will be making a new bigger valve and double the volume of the air tube.
Should get me closer to the next thousand fpe mark.

Some of you might call it for bragging rights, or show off. But my intention is just to see how much there is to be had.

And having one of the most powerful airguns, one can be bragging a little?

Nothing mysterious in it, just a big valve and a long barrel. You just need to make sure every part of the gun is more than rigid enough.

Marko

uncle paulie · « **Reply #364 on:** February 03, 2020, 08:51:20 AM »

At what point do these become "Air Cannons"? LOL!

pv

Brian W Cook · « **Reply #365 on:** February 03, 2020, 11:13:40 PM »

Get busy making parts Marko. I need some inspiration to get a couple of my projects past the idea stage .

Tiroflojo · « **Reply #366 on:** February 04, 2020, 07:03:34 AM »

Guau...
An air rifle to hunt dragons.

MJP · « **Reply #367 on:** August 01, 2020, 02:57:58 AM »

Long time on this one but I made a small features video on the gun if anybody is interested.
New parts are delayed for the obvious reasons we all know. But I have access to a bigger lathe again from next week so maybe we'll see some new stuff before the fall.

Marko

YEMX · « **Reply #368 on:** August 01, 2020, 10:43:45 AM »

That is absolutely gorgeous!!! Really, amazing work!

Whew!! I thought MY builds were too long!

MJP · « **Reply #369 on:** August 01, 2020, 02:48:59 PM »

Thanks Tom!
Nah, I dont think your builds are too long! Even mine fits in side the AiM 60 size dragbag. If I remove the buttstock but still.

Marko

Jim Holmgren · « **Reply #370 on:** August 08, 2020, 06:39:22 AM »

Thanks for the video!
Real nice to see some close ups and you work is as always real pieces of art!

YEMX · « **Reply #371 on:** August 08, 2020, 09:24:21 AM »

It's funny- re-watching your vid a few times, you've made what I've had in my head for a long time!! It's nice to see the concept actually works! I had/have no way to make what you have- but still... VERY nice!

oldpro · « **Reply #372 on:** August 10, 2020, 05:26:06 PM »

WOW! Whats to say but Amazing work.....Nothing like it.

MJP · « **Reply #373 on:** August 11, 2020, 12:15:49 AM »

Thanks guys,
I'm really tempted to build a second one but with lighter barrel and bullpup design. I still have one more madsen barrel in stock.

1000cc carbon tank and make it so that it could be shot without a rest. Maybe a next winter project if I don't have too much other stuff to take my time.

Marko

MJP · « **Reply #374 on:** September 30, 2021, 03:18:00 PM »

And here we go again, some update parts for this.
First cut with carpenter tools

Next with drill and boring bar. Not fun to cut 145mm with short bar, only 30mm in the holder.

Next thing is some more turning and then in to the milling center.

Marko

sb327 · « **Reply #375 on:** September 30, 2021, 04:23:48 PM »

This is my first time seeing this build…..excellent work my friend, just excellent.

Dave

MJP · « **Reply #376 on:** September 30, 2021, 04:56:09 PM »

Thanks Dave,
It has been in the background with so many other projects. But now I have some time to make a new valve frame before the winter is here and season ends.
This time just might actually have time to finish the frame and not leave it so rough.

Marko

Rob M · « **Reply #377 on:** September 30, 2021, 05:08:09 PM »

nice, cant wait to see 4000 FPE

MJP · « **Reply #378 on:** October 01, 2021, 01:26:49 AM »

Thanks Rob,
You and me both!
Just not sure if the air tube is big enough, It should be close to enough and the bigger valve will help.

Marko

MJP · « **Reply #379 on:** October 01, 2021, 05:11:48 AM »

Turning work done, next step will be in the machining center.

That will probably be next weeks stuff, need to help bro this weekend.

Marko

Thank you to our advertisers!

Project Fury 20mm BIGbore. 3100FPE!

Author Topic: Project Fury 20mm BIGbore. 3100FPE! (Read 86311 times - 2 votes) )

Author Topic: Project Fury 20mm BIGbore. 3100FPE! (Read 86311 times - 2 votes)
)