the hatsan edge vortex

[Jorden Kinnison]

Can I put a dovetail to weaver adapter with dot sight on this gun hatsan edge vortex with out it distroying it. I'm putting a dagger defense dd119 red dot reflex sight and a 11mm dovetail to 20mm weaver scope rail converter adapter for air gun or rifle. Will this work on this gun??

[yonip69]

Welcome to the GTA !!

[Roadworthy]

Hi, Jordan.  Welcome to the GTA!!

To address your question - you should be able to use a dovetail to Weaver adapter with no problem.  Due to recoil you will probably want an adapter with a stop screw. 

[amb5500c]

Welcome to the GTA.
Richard

[BreakBarrelBen]

This mount will also allow you to adjust for barrel droop and it's 11mm dovetail to weaver mount.  It also uses the scope stop and for the money is well worth it!


https://www.pyramydair.com/product/utg-drooper-scope-rail-11mm-to-weaver-adapter-compensates-for-droop?a=4191

EDIT: Locktite everything with some blue stuff when installing.

[DOUGER]

I JUST GOT ONE BUT PUT THE YTG SCOPE ON IT. SHOOTS VERU GOOD WITH JSB DIABLO ANY OF YOU GUYS HAVING A TRIGGER THAT JUST SEEMS BAD. MY BENJI HAS SUCH A NICE TRIGGER BUT LOVE THE EDGE SO I SHOOTING IT BUT JUST HATE THE TRIGGER

[SteveP-52]

I have a Monster dovetail to weaver adapter and a Vokul red/green dot on mine, Edge .25 spring piston. Wanted to try a dot sight and everything mounted just fine.Used blue loctite 242 on all the screws, let it set, sighted in and so far works great. Time will tell how it holds up to the kick on my spring version. Have the same rifle with the Vortex piston and it kicks less than the spring so you should be ok.

[SteveP-52]

I JUST GOT ONE BUT PUT THE YTG SCOPE ON IT. SHOOTS VERU GOOD WITH JSB DIABLO ANY OF YOU GUYS HAVING A TRIGGER THAT JUST SEEMS BAD. MY BENJI HAS SUCH A NICE TRIGGER BUT LOVE THE EDGE SO I SHOOTING IT BUT JUST HATE THE TRIGGER

It's not so much that it's a bad trigger, just a pretty basic one with no real adjustments. I've been on here myself trying to find more info on the trigger and either a way to make it better or flat out replace it. I have a post about it in the Welcome section with pics as I have the rifle out of the stock so I could get a better look. Hopefully the shooters here will be able to help.