Author Topic: Group Buy - .30 cal Pellet Mold 54-61 gr. (Read 8143 times))

rsterne · « **on:** August 19, 2015, 10:39:25 PM »

The Group Buy for this pellet mold is now open.... This pellet is designed to fit and function in the .25 cal MRod magazines converted by AirGunLab to .30 cal.... Once Jeremy has received 5 paid orders, he will start work on the new pattern, and absorb the $35 pattern charge.... He has suggested a delivery time of about 10 weeks from that point.... Molds will be $135 for a single cavity, plus $25 extra for each additional base pin to allow a weight change.... Shipping is extra.... There are three suggested weights on the drawing.... All weights are calculated, but should be pretty close.... they may have changed slightly from the discussion thread.... You will need to specify the weight(s) that you want.... Here is the drawing....

To order, PM jkingsouthafrica to get the details on how to proceed.... If you are participating in more than one Group Buy, talking to him about it may save you some on the shipping.... Note that I am only the designer, I have no affiliation with Jeremy, all arrangements and obligations are between you and him.... Each Group Buy is a stand-alone, and not influenced by the status of the others.... If you decide to participate, please post here so that we know how many are involved in each Group Buy.... The molds fit the inexpensive Lee 6-cavity handles (not supplied)....

Bob

cpt_sfc · « **Reply #1 on:** August 21, 2015, 12:06:17 AM »

Count me in for one w/handles for 30 cal as shown 54 - 58 gr or close. How do I pay for this??and when will we know if enough people go in on it.
Thanks

cpt_sfc · « **Reply #2 on:** August 21, 2015, 12:11:30 AM »

I'm an idiot , just read I need to get my own handles
sorry

jkingsouthafrica · « **Reply #3 on:** August 21, 2015, 12:54:00 AM »

you can Pay pal to africanairordnance@gmail.com as soon as 5 molds of one type have been paid for we can start making that mold type

jkingsouthafrica · « **Reply #4 on:** August 21, 2015, 12:56:26 AM »

Double cavity molds will be $195 will come with 2 of same base inserts optional base inserts for different pellet weight will be $25 per insert

jkingsouthafrica · « **Reply #5 on:** August 23, 2015, 11:13:06 PM »

2 molds have been bought and paid for 3 to go and we can begin production

RHytonen · « **Reply #6 on:** August 25, 2015, 02:50:11 PM »

Will that skirt work for the actual .300 TJ's liner?

Rod

rsterne · « **Reply #7 on:** August 25, 2015, 07:18:32 PM »

Absolutely, it is identical to the JSBs, and the .300 TJ's liner won the EBR shooting those....

Bob

n4spd · « **Reply #8 on:** August 25, 2015, 10:19:37 PM »

Glad I accidentally found this post!

I just PM'd jkingsouthafrica for a 2 cavity mold, 61 gr, with handles.

Awesome, Rob

jkingsouthafrica · « **Reply #9 on:** August 26, 2015, 12:49:45 AM »

Hi guys hope you are all well Ok I've gotten payment for 2 molds a single cavity and 1 double cavity mold in this buy and just invoiced for 3 more double cavity molds as soon as payment is received for the outstanding invoices we can start making the molds.
MOLD HANDELS guys its much cheaper for you guys to buy LEE pro 6 cavity mold handles in USA than for me to ship them from South Africa to you

jkingsouthafrica · « **Reply #10 on:** September 03, 2015, 09:34:21 AM »

Guys here are photos of the new double cavity JBS 9mm /357 mold just to give you an idea of what the 30 cal double cavity molds will look like once we begin to make them .. this one cast in 82 and 86 grain the photo of the pellets the real JSB is on the left you can see the cast one is almost identical in length to the original

n4spd · « **Reply #11 on:** October 07, 2015, 11:59:35 PM »

bump: update on number of orders?

jkingsouthafrica · « **Reply #12 on:** October 08, 2015, 04:38:23 AM »

so far just 2 have been ordered a and paid for there were a number of guys who ordered but have not paid yet .
So as to not let the 2 guys who paid down We have started to make there molds as its not fair on them to have to wait such a long time

jkingsouthafrica · « **Reply #13 on:** October 13, 2015, 01:18:54 PM »

The two mold that were paid for will be ready for shipping on Monday the 19th of October via DHL

jkingsouthafrica · « **Reply #14 on:** October 15, 2015, 09:58:29 AM »

The first double cavity .30 cal pellet mold going to Robert Chou in CA

scottyhazzard · « **Reply #15 on:** October 26, 2015, 04:59:10 AM »

If photos of shot groups and chrono results produced using this mold should get posted, I would imagine that demand would increase. How much would the cost be to produce 100 of these versus buying JSB's in a similar weight? If they shoot well and cost less, then the mounds should sail of off the shelves, so to speak.

jkingsouthafrica · « **Reply #16 on:** October 26, 2015, 07:55:13 AM »

Hi the first mold was delivered to the owner last week so still waiting to get his results . the 9mm JSB mold we make has delivered as good of results as the factory original . Using a Recluse 9mm that we had tuned with one of our kits we were getting an average of 975fps and groupings well Ill let the photo speak for its self .. 5 shot group with hand cast 82 grain pellets at 55 yards .

scottyhazzard · « **Reply #17 on:** October 26, 2015, 11:55:21 AM »

That's really awesome.

jkingsouthafrica · « **Reply #18 on:** November 02, 2015, 02:10:04 AM »

her is the link to a video of me casting 30 cal 61 grain pellets on youtube

Tater · « **Reply #19 on:** November 02, 2015, 02:21:16 AM »

Wow, that goes pretty quick once you get in a rhythm.

Thank you to our advertisers!

Group Buy - .30 cal Pellet Mold 54-61 gr.

Author Topic: Group Buy - .30 cal Pellet Mold 54-61 gr. (Read 8143 times))