Author Topic: So what did you Order / Receive today ? (to feed the "Beast" that lives within) (Read 1399659 times - 11 votes)
)

Insanity · « **Reply #11880 on:** December 17, 2019, 08:54:19 PM »

Only for ABS as far as I know that breach is PETG. If you dip the broken one in acetone and it melts then you can do a vapor polish on it.

ranchibi · « **Reply #11881 on:** December 17, 2019, 09:32:32 PM »

Quote from: Skeeeets on December 17, 2019, 07:07:47 PM

Quote from: ranchibi on December 17, 2019, 07:02:43 PM
Received a Rocker1 extended baffled shroud for my new PRod from him today! Boy is this a thing of beauty, QUIET and made extremely well as always from David! Rattus beware!

Post a video lol

Skeeter, when I get the RAI adapter, UTG stock (ordered together) and the woody stocks from you, I’ll post PICS! LOL! Can’t wait, thank you 🙏

Wepster · « **Reply #11882 on:** December 18, 2019, 08:12:52 AM »

Received my Benjamin Trail Stealth .177, boy is it slippery! Cleaned the barrel, took a quick shot with a Crosman competition wadcutter (7.4 gr), it is pretty quiet in my garage.
Think I will try some spray plastidip on the suppressor and the forearm.
It has a front sight, and the barrel is tapped (I assume, it is bored) for the rear sight. I will look into ordering the rear sight. Guessing shipping will be as much as the sight.
And, a red dot, scope, sling and pellets, that Crosman sale got me good.

Rick67 · « **Reply #11883 on:** December 18, 2019, 01:55:35 PM »

Quote from: Skeeeets on December 17, 2019, 06:22:22 PM

Quote from: Rick67 on December 17, 2019, 03:39:17 PM
Quote from: Skeeeets on December 17, 2019, 02:55:16 AM
I ordered my first one from poland without that under cut. Thats whats stuck on my 2240... i was going to buy the one with the cut for my stubby but Rocker1 said hed make me one. He sent me that picture of what he made and i guess some kinda mix up happened. The one from Rocker1 is aluminum so it dont add really any weight, but it does have some sharp edges.

The one with an undercut from Poland has a smaller OD and is actually the same diameter as its thread cap, so it is much lighter

Dunno why they make the regular model so fat and solid, as if you would hang a 1-ton LDC at its tip

Bought my adapters from Sklep Militaria something--those Polish made adapters look the same though, lol!

Same person i ordered from. Question, that belly cut one, is the ID atleast big enough to slide onto the barrel? Im half tempted to send my 2240 barrel to someone to remove the stuck one and fix it... but i have no reason to take it off unless i need a new barrel in a few years. The regular model, im kinda liking the extra weight on the front to balance the weight on the 2240.

Got my package from Matt. The replacement breach for Chester and i forgot i asked, a bunch of printed TPs for the 22xx/13xx ect guns. Il beable to test different sized IDs and "custom" fit them with some sand paper.

One time I like about the Polish adapter with the crescent belly is that you can install it in a barrel that is level with the tube (e.g. OEM 1377), free float it and it proves solid as it somewhat touches the tube.

I have tried it on mine and on a 22xx build with the barrel the same length as the tube's tip.

It actually works even if the barrel is shorter than the tube.

If you have a problem removing yours you need to heat it; use a blower or heat gun or you can "cook" it over your stove's flames..

maraudinglizard · « **Reply #11884 on:** December 18, 2019, 02:39:10 PM »

Ordered a hunting tripod, the free standing bipod that I have now doesn't do well in one of my ground blinds.

DamonZ28 · « **Reply #11885 on:** December 18, 2019, 05:37:02 PM »

I ordered a Hatsan Spark compressor for filling my Flash. Can't wait for it to arrive. Paid just under $359 out the door, from Optics Planet.

anti-squirrel · « **Reply #11886 on:** December 19, 2019, 05:39:14 PM »

I gave in finally. Been so good for so long...

Ordered a Tanto from Donny, and narrowing the search on NVG and/or light-gathering optics.

maraudinglizard · « **Reply #11887 on:** December 19, 2019, 08:28:03 PM »

Quote from: anti-squirrel on December 19, 2019, 05:39:14 PM

I gave in finally. Been so good for so long...

Ordered a Tanto from Donny, and narrowing the search on NVG and/or light-gathering optics.

Congrats, it will be fine, sometimes it's nice to have something for oneself and not feel guilty or remorse.

anti-squirrel · « **Reply #11888 on:** December 19, 2019, 10:05:12 PM »

Quote from: maraudinglizard on December 19, 2019, 08:28:03 PM

Quote from: anti-squirrel on December 19, 2019, 05:39:14 PM
I gave in finally. Been so good for so long...

Ordered a Tanto from Donny, and narrowing the search on NVG and/or light-gathering optics.

Congrats, it will be fine, sometimes it's nice to have something for oneself and not feel guilty or remorse.

Thanks, Kris.

Depending on what happens tomorrow (the final vote on whether we sell our company) I may find myself with some funds to get an upper-tier PCP and an ATN scope- sad part is I'd have to wait until April time-frame, but I've managed just fine with my current "tool" selection of anti-squirrel devices.

Jshooter71 · « **Reply #11889 on:** December 20, 2019, 04:50:24 PM »

Didn’t want do it at first, but went ahead & ordered the 3-12x32 Bug Buster for the QB78. It shoots great groups with the open sights, just about an inch too high out to 20 meters. Should be here by Saturday after Christmas.

Roark · « **Reply #11890 on:** December 20, 2019, 07:05:26 PM »

My Christmas present to myself hit the porch about noon.A ProChronodlx.Just got back with the nine volt for it.Menards did not have the led lights I was looking for to use indoors.Got two led mini flashlights for two bucks each batteries included.If they don't work they will still be handy to have around.

Insanity · « **Reply #11891 on:** December 20, 2019, 07:16:17 PM »

Quote from: Roark on December 20, 2019, 07:05:26 PM

My Christmas present to myself hit the porch about noon.A ProChronodlx.Just got back with the nine volt for it.Menards did not have the led lights I was looking for to use indoors.Got two led mini flashlights for two bucks each batteries included.If they don't work they will still be handy to have around.

I use some white automotive striplights onto of the diffusers and 2 9v batteries. I have all the stuff to convert it all into AC wall outlet.

wolverine · « **Reply #11892 on:** December 20, 2019, 08:07:12 PM »

i ordered my Christmas and 60th birthday (next month) present today. .177 Weihrauch HW100 BP-K AOA has a holiday deal and i got a Weihrauch 3-9X40-P scope for free. i'm sure i'll be upgrading the scope.

Arch_E · « **Reply #11893 on:** December 20, 2019, 08:08:44 PM »

Quote from: wolverine on December 20, 2019, 08:07:12 PM

i ordered my Christmas and 60th birthday (next month) present today. .177 Weihrauch HW100 BP-K AOA has a holiday deal and i got a Weihrauch 3-9X40-P scope for free. i'm sure i'll be upgrading the scope.

Congrats!!!!! Spoken in the spirit of red, white, and green (with a tinge of envy)

Archie

Roark · « **Reply #11894 on:** December 20, 2019, 09:57:09 PM »

Not much luck so far.Played around with room lighting about the only thing I could think to do with the flashlights was set them on top of diffusers.Got two readings out of the first six or seven shots.No matter what I tryed no more readings no error readings even.

Lt. Dan · « **Reply #11895 on:** December 20, 2019, 11:30:37 PM »

I got the final shipment of P17 pistols today. And I received my new Striker Beech stock from Hatsan. It's going on an Edge .22.

Xraycer · « **Reply #11896 on:** December 21, 2019, 07:59:59 AM »

Waiting impatiently for my shroud extension for my Bullboss to be delivered by USPS. Tracking states that it was to be delivered yesterday, but I didn't get it, and the tracking now just says "in transit", but no longer indicates exactly where it is right now

Rat Sniper (AKA: PaulT58) · « **Reply #11897 on:** December 21, 2019, 09:30:55 AM »

Quote from: Xraycer on December 21, 2019, 07:59:59 AM

Waiting impatiently for my shroud extension for my Bullboss to be delivered by USPS. Tracking states that it was to be delivered yesterday, but I didn't get it, and the tracking now just says "in transit", but no longer indicates exactly where it is right now

I have been seeing that a lot lately, it's frustrating! Yesterday I had a FedEx truck (actually a Budget Rental Truck with a FedEx magnet of the side) pull up and stop in front of my house. It sat there for a few minutes and then another FedEx Budget truck pulled up and backed up to it, bumper to bumper. They then started off loading packages from one to the other. About 15 minutes later they both drove off. I never did get the package I was expecting...

Lt. Dan · « **Reply #11898 on:** December 21, 2019, 03:25:09 PM »

FedEx just delivered my P1322 kit from Walmart. $49.99 the box contained...
•P1322 pistol
•Shoulder stock
•Pellets
•Safety glasses
•Ammo pouch

Arch_E · « **Reply #11899 on:** December 21, 2019, 04:44:30 PM »

Quote from: Lt. Dan on December 21, 2019, 03:25:09 PM

FedEx just delivered my P1322 kit from Walmart. $49.99 the box contained...
•P1322 pistol
•Shoulder stock
•Pellets
•Safety glasses
•Ammo pouch

Nice purchase!

Archie

Thank you to our advertisers!

So what did you Order / Receive today ? (to feed the "Beast" that lives within)

Author Topic: So what did you Order / Receive today ? (to feed the "Beast" that lives within) (Read 1399659 times - 11 votes) )

Author Topic: So what did you Order / Receive today ? (to feed the "Beast" that lives within) (Read 1399659 times - 11 votes)
)