So what did you Order / Receive today ? (to feed the "Beast" that lives within)

[airgunaut]

Received this Diana 34 I bought on Ebay. 08/03 production date, it has some rust speckles on the barrel, otherwise in very good shape.
It shoots real well!

 

 

 I also received a 1" thick 6"x 6" chunk of plexiglass for a shield because someone keeps grazing my chrony when I'm testing airguns; I mean when 'someone' is testing airguns... 

Every time I see your photo(s) of the Diana 34, I think what a sleek, cleanlined thing it is. Simple lines with a few curves can be so beautiful. Well, I can tell where I'll end up if I follow only the aesthetic factors.

[Zsigmund]

Received this Diana 34 I bought on Ebay. 08/03 production date, it has some rust speckles on the barrel, otherwise in very good shape.
It shoots real well!

 I also received a 1" thick 6"x 6" chunk of plexiglass for a shield because someone keeps grazing my chrony when I'm testing airguns; I mean when 'someone' is testing airguns... 

Every time I see your photo(s) of the Diana 34, I think what a sleek, cleanlined thing it is. Simple lines with a few curves can be so beautiful. Well, I can tell where I'll end up if I follow only the aesthetic factors.

 They are very svelte, the older 34 seems a little sleeker and lighter than the EMS. Maybe that's just my examples..

 Save yourself and don't buy any more airguns! Let me be your and others airgun Boddishattva, it's too late for me to turn back anyhow, I'm doomed! 

 Cheers,
        G

[ER00z]

Put an order in for Apolo 8.48gr wadcutters. Was looking for a mid weight wadcutter and as a bonus these seemed reasonably priced.

[bear air]

I got the regulated M457 today. Everything seems to be fine. I'll give it a good once over this weekend.

[bantam5s]

I was shooting my Daisy 499, and the plastic muzzle funnel of the shot tube just snapped itself right off so I had to order another one from Cobalt's Ebay store.

[bear air]

I got the Veyron 10x44 today. I also got notice they were out of the 3x12 veyrons so I got a refund.

[Zsigmund]

 Krale sent notification that the Artemis PP800R is back in stock.... I keep trying to not look at the listing there. Please save me, gulp.

Ok, this is the part where you guys talk me out of it, GO! 

 Cheers,
        G

[Rick67]

Krale sent notification that the Artemis PP800R is back in stock.... I keep trying to not look at the listing there. Please save me, gulp.

Ok, this is the part where you guys talk me out of it, GO! 

 Cheers,
        G

If you feel you have enough, then don’t buy it, sir.

I’ve less than 10 and I feel it’s already too much, so I’ll just beautify what I have.

I’m still waiting for the one I sent out for nickel boron plating….

….and there’s 2 that is out for Gunkote(ing) here in Abq., a supposedly superior finish (as seen in YT) compared to the overrated Cerakote 

The applicator told me lighter colors aren’t as tough as dark ones but he bakes them and puts clear coat to make them tougher 👍

So that’s my MOTTO: Make Them Prettier 🥴

[Zsigmund]

Krale sent notification that the Artemis PP800R is back in stock.... I keep trying to not look at the listing there. Please save me, gulp.

Ok, this is the part where you guys talk me out of it, GO! 

 Cheers,
        G

If you feel you have enough, then don’t buy it, sir.

I’ve less than 10 and I feel it’s already too much, so I’ll just beautify what I have.

I’m still waiting for the one I sent out for nickel boron plating….

….and there’s 2 that is out for Gunkote(ing) here in Abq., a supposedly superior finish (as seen in YT) compared to the overrated Cerakote 

The applicator told me lighter colors aren’t as tough as dark ones but he bakes them and puts clear coat to make them tougher 👍

So that’s my MOTTO: Make Them Prettier 🥴

 Thank you!

 I'd love to see pics of the nickel plating and Gunkote when you get them back.

 Cheers,
        G

[Rick67]

Krale sent notification that the Artemis PP800R is back in stock.... I keep trying to not look at the listing there. Please save me, gulp.

Ok, this is the part where you guys talk me out of it, GO! 

 Cheers,
        G

If you feel you have enough, then don’t buy it, sir.

I’ve less than 10 and I feel it’s already too much, so I’ll just beautify what I have.

I’m still waiting for the one I sent out for nickel boron plating….

….and there’s 2 that is out for Gunkote(ing) here in Abq., a supposedly superior finish (as seen in YT) compared to the overrated Cerakote 

The applicator told me lighter colors aren’t as tough as dark ones but he bakes them and puts clear coat to make them tougher 👍

So that’s my MOTTO: Make Them Prettier 🥴

 Thank you!

 I'd love to see pics of the nickel plating and Gunkote when you get them back.

 Cheers,
        G

I will 👍

The Gunkote applicator started them just today: 1 is actually a Cerakoted (different applicator) one that has so flimsy a coating a slightly-tightened aluminum scope ring would even mark it and so does rubbing it with Ballistol,  so I’m having it redone, while the other is an anodized Crosman 1720T.

Also had some Crosman grip frames powdercoated in silver-grey with a sandy texture; believe me, PC is about the only paint that adheres well to pot metal/zamak.

As for the AG for plating, it should be done in 2 weeks or less, I hope.

Yes, beautify my current inventory, not that they’re ugly, and buy more good quality scopes is what I’ll do 

[Rick67]

Slabs for my Blue Fork 1911 Crosman grip panels a couple of days ago.

They’re very nice and  cheap at $25 shipped and look exactly as advertised, although mine’s darker👍

[airgunaut]

Rick, that's a nice sublimation of "desire to acquire." You get something unique and you value what you already have even more.

[airgunaut]

Krale sent notification that the Artemis PP800R is back in stock.... I keep trying to not look at the listing there. Please save me, gulp.

Ok, this is the part where you guys talk me out of it, GO! 

 Cheers,
        G

You'll get very little talking-out-of from this crew, unless it's to simultaneously talk you AWAY from one gun and TOWARD another one!

[Rick67]

Rick, that's a nice sublimation of "desire to acquire." You get something unique and you value what you already have even more.

Thank you, Miss Pat 👍

[BerkshireHunter]

Went to Walmart because I saw on Walnut&Steel theyre changing crosman pellets from the American type to those made in spain. They had a bunch of stuff there on 'clearance' and the pointed were $2, the pirhanas were $4 and the red fire were $5.

[Zsigmund]

Krale sent notification that the Artemis PP800R is back in stock.... I keep trying to not look at the listing there. Please save me, gulp.

Ok, this is the part where you guys talk me out of it, GO! 

 Cheers,
        G

You'll get very little talking-out-of from this crew, unless it's to simultaneously talk you AWAY from one gun and TOWARD another one!

 Lol yes, or two guns instead of just the original one.. 

[Hoosier Daddy]

Krale sent notification that the Artemis PP800R is back in stock.... I keep trying to not look at the listing there. Please save me, gulp.

Ok, this is the part where you guys talk me out of it, GO! 

 Cheers,
        G

You'll get very little talking-out-of from this crew, unless it's to simultaneously talk you AWAY from one gun and TOWARD another one!

 Lol yes, or two guns instead of just the original one.. 

Stop this nonsense... if you want it... buy it!
 There, that is my help.

[bear air]

I agree with Scott on buying or not. Keep in mind we're probably going to see a significant price hike soon. I'm with you Rick on customizing your guns. It can be pretty spendy though. I purchased the folding stock delete from Texoma precision pellet for the new m457 last night. It's way too wobbly for my tastes. Plus this is a full sized rifle, quite foolish to add a folding stock adapter to it IMHO. I do have them on my m50 50 cal with the ten inch barrel and my hp max 457. I didn't put one on the other non regged m457 with a 700 cc bottle . As for the 800 I was put off by the single shot aspect. I went with the pp750!

[Madd Hatter]

I just bought a 70s something Sheridan. I probably won't be picking it up until the middle of April when I go to petsit for them. The main thing it needs is a good cleaning as it seems good mechanically.

[airgunaut]

I just bought a 70s something Sheridan. I probably won't be picking it up until the middle of April when I go to petsit for them. The main thing it needs is a good cleaning as it seems good mechanically.

You convinced them to sell! 🎉   Is your petsitting part of payment on the Sheridan?