Gargoyle with the low preasure valve

[melloroadman]

Did a comparison today . With a 3000 psi fill . In 10 minutes the valve can be changed to get this rifle over the 650 fpe . mark . The bullet.

The readings .

 Even on a fill of 3200psi . with the low preasure valve it has over 400 fpe .

Hope this helps some one see what can be done with a BB . If you start with the right rifle . With the new XP it is even easier than this . Marvin

[JonnyReb]

 So the XP is your favorite of them all? You have an incredibly adaptable gun there Marvin, a powerhouse too, J

[melloroadman]

Take a good look at that rifle and its modular construction . You buy a 45 today and next year you want a 58 . No need to buy a whole new rifle . Just a barrel and receiver . Want to change power levels . Remove a couple screws and place in a different hole and it is done . CNC machining top quality materials . Air tight construction . My Gargoyle was made by him and the workman ship is the best I have seen so far . It is pricey but by looking at it it is a better buy than my Gargoyle and it is worth every penny I paid for it . Until you have shoot one of his rifles you can not understand . The smoothness of operation surpasses anything else I have shoot as far as a AR goes . Marvin

[JonnyReb]

 I've been looking at them online and reading about the 2 barrel/2 tube combo, giving 6 different setups considering the gun has a low/med/high setting. They do look like they are very well finished to, a production looking gun rather than a semi custom. Plus i saw 1000ft lbs out of the .58    Well if i ever hit the big money i'll have to try one out,  J