Carbon Fiber Tank Fill

[Dave19113]

Finally was able to get over to the local firehouse to see if they would be able to fill my air venturi carbon fiber tank being that it is in the way to my range and 5 minutes from my house. The guy was really nice and walked me over to the truck to where they fill the tanks. The problem is his connections dont work on my bottle.

I asked him which connection I needed to adapt but he wasnt sure. He said this is what they use to fill their tanks.

Does anyone happen to know if I can get an adapter that I can just screw onto my tank so they can fill?

[Frank in Fairfield]

Joe at airtanksforsale.com

[cwmoss]

2nd Barnydaddy's recommendation. Call Joe, tell him what you have and he can get you what you need. Joe is a goodguy.

[npunk42]

There are adapters for almost everything. Chances are good you'll need something very common. Remember to ask the name of your current connection, and the name of the proper adaptor. Write it down somewhere you can find it if you need to fill some place else you'll know what to tell them.

[Dave19113]

2nd Barnydaddy's recommendation. Call Joe, tell him what you have and he can get you what you need. Joe is a goodguy.

Yea Im going to give him a call next week.... I just have to figure out what the cost effectiveness is going to be. Im also looking into the bigger air venturi tank. That way I can just worry about limited refills.

Either way Im going to give him a call to see.