LDC for the xs60c pcp

[timinater64]

Has anyone came up with a idea on how to lower the shot noise on the FD pcp?

[smythsg]

I had a TKO on mine, worked great

[ScarletFire186304]

there was this thread where someone talked about a LDC for them .
check reply #8   

http://www.gatewaytoairguns.org/GTA/index.php?topic=84717.0

BTW, i have TKO's also . they do work great (they are not cheap. you get what you pay for, though) 

bob

[timinater64]

Im sorry but what is a ldc?

[ScarletFire186304]

ahh, i remember when i asked that very same question about a year ago!! 

i PM'd you.

bob

[Busta Cap]

I had a TKO on mine, worked great

Same here and made it super quiet!!  Lots of experience here with folks making their own barrel length tubes instead of pickles though

[StevenG]

Same here, TKO works great. Almost Hollywood.

[timinater64]

Ok thanks all next question how do you get the front sight off ? Man that thing is on there. Oh by the way got my new scope from on from Amazon its a 3-9 by 56 id love to send pics from my samson but forgot how to do it.

[tuanhatsan125]

remove the front sight simlpy unscrew the set screw give it a light tap and voila ! so easy.

[Busta Cap]

If you have any questions don't hesitate to call MM.  He almost always answers the phone and is always willing to answer your questions.

[Ribbonstone]

Think it's the same diameter barrel as the QB78D/QB79, at least on mine (1st generation) the LDC for one fits on the other.

[timinater64]

I took set screw out i put it in a vise i pulled on it with a channel locks i cant get it to budge.

[Sfttailrdr46]

  Try using a wooden block and Light hammer place wood against front sight and give wooden block a sharp tap with hammer it should pop right off

[Kailua]

I used a heat gun to remove my muzzle break.

[PBguns]

I have a Umarex Fusion (very close). I cut the LDC that came with it off & made a new one. Its quiet now. Just got done with the bulk mods last month. You will be happy when you quiet it down. 

[timinater64]

Nice pic, I ended up taking my front sight off and sawed of the fiber optic and put a piece of plastic hose into the sight hole just enough for me to get it back on, i made it snug with a wrap of duct tape. It took away the load crack, so better than it was. So far this is my most favorite gun ever.