Getting dialed in with the TalonP

[Olschool]

I've been getting my TalonP dialed in. I put a BSA sweet 22 scope with the standard 40gr dial and shooting JSB Match Diabolo Exact King .25 Cal, 25.39 gr pellets. With a 20yd zero I have the scope dial set on the 50yd mark and the power wheel set on 8,1. With a 2700 psi fill I'm getting 880fps, 43.67ft/lbs and can set the dial on 75yds and be on at 75yds.
I also just picked up a 17ci hpa paint ball tank with Ninja regulator. Using the CO2 adapter and the same pellets I got 495fps, 13.82ft/lbs with the same power setting on the TalonP. By changing the dial on the scope to 125yd mark I am shooting into the same group at 20yds as using the stock tank and scope set on 50yds.
I'm ready to use the stock tank for ground squirrels, racoons, fox, and coyotes, and the regulated tank for rats, squirrels, and other pests

[Olschool]

Very happy! Was thinking to get a .35 but was put off by total cost of getting started with a pcp. Then was asked to get rid of some ground squirrels around the yard of my deer lease property. Shot a few with my .22 Trail NP2, but several shots were 50-60yds with no recovery. After reading about several .25 guns the TalonP let me get into pcp with tanks, fill adapters, etc within my budget and the reports on the power and accuracy were right on the money.
Got the regulated tank yesterday and once I figgured out the scope settings shot a 20 round, 20yd group that fit under a nickle, 10 shots high power, switch tanks and scope setting and 10 shots low power

[Olschool]

And it's working