Pyramid air says no refill vortex

[Pappywith4]

I can't imagine they don't have what it takes to refill these vortex Pistons!
Does anyone know where I can buy the hose and port that I need to refill my vortex?

[Yarp]

It's likely that others will have better advice, but here goes:
Try Hatsan USA. I've had good luck dealing with their service department. It's likely that they will recommend an in-house repair, http://www.hatsanusa.com/warranty-repair/
Also Mike at flying dragon may be able to help as well. flyingdragonairrifles@hotmail.com
Good Luck

[SpiralGroove]

Hey John,
I have filled the Vortex gas ram with my Benjamin pump set-up.  So you need the following:
1) Pump & hose (comes with pump).
2) Air Venturi Male Quick-Disconnect, 1/8" BSPP Female Threads, Steel, Rated to 5000 PSI, Incl. Delrin Seal
3) Hatsan Male fill probe (comes with a PCP gun) - I will give/send you one of mine if you get 1) & 2).

Or send the gas ram to me & I will fill.........just pay for shipping..
_________________________________________________________
I don't know enough about the tanks to say anything on that option.

[Pappywith4]

Hey John,
I have filled the Vortex gas ram with my Benjamin pump set-up.  So you need the following:
1) Pump & hose (comes with pump).
2) Air Venturi Male Quick-Disconnect, 1/8" BSPP Female Threads, Steel, Rated to 5000 PSI, Incl. Delrin Seal
3) Hatsan Male fill probe (comes with a PCP gun) - I will give/send you one of mine if you get 1) & 2).

Or send the gas ram to me & I will fill.........just pay for shipping..
_________________________________________________________
I don't know enough about the tanks to say anything on that option.

Thanks thats real kind!  I have a air tank from the fire dept that is full but no hoses!  So I was trying to get what it takes to make it happen!  So pm me your address and phone number !