So what's on your wish list?

[ancient1one]

Jesse what are you doing for air?

[Booger]

Jesse what are you doing for air?

I use a nebulizer to breath, oh wait you are talking about my PCPs. I have a full armor Great White (from air tanks for sale) with all the bells and whistles.

[mr007s]

I wish the bullets I ordered from Big Lube last November would arrive.

[Booger]

I wish the bullets I ordered from Big Lube last November would arrive.

Call them.

[Genolution]

I've been reading up on those cz's. If I was sure I could get 25-30 fpe from one with readily available parts I may have to update my wishlist lol

[Busta Cap]

Hammerli in .22
Galatian QE in .25
Fax Bobcat in .25

In that order-hey babe, are you listening...did you hear that???

[YEMX]

Short list?

1720T Rapid70 bullpup
13xx/2100 Hybrid pumper
.30 QB PCP

Long List?  Above, plus:

Dawson/Chip Smith/220 Swift .30 rifle
USFT Hunter non-regulated in .20
Rainstorm in .30, with a TJ barrel and Neil Clague LDC
.25 disco
Modified BS4
Smooth Twist .25 Condor SS
Doug Noble .257 w/custom frame

[Nitrocrushr]

Short list;

A regulated PCP in .22 or .25 - still reading up on them, all new to me
Diana 6G .177
Chronograph

[Dockey 454]

There are a few I would really like to have a nice 392 Racine model, a RAW HM1000X .357 ,an HW 98 .177  and an HW97K

         I'm with you Don. The HW 100 is a hard act to follow. I want a RAW in 22 for long distance bench shooting.
               Tom

[DavidS]

Short list;

A regulated PCP in .22 or .25 - still reading up on them, all new to me
Diana 6G .177
Chronograph

As of today my wish list is caught up.   I now have the parts to switch back and forth between a 2289g, 2240, and 2240 HPA (many parts shared), and my Crosman 140 is in route.

I already have all of the optics I want, I already have all the tools I want (mill, metal working lathe, drill press, drimel, and a large assortment of hand tools).

So the only thing left is raw materials, to make unique new parts .   The only thing left on my wish list.

Oh yea, and a chronograph .

[AHMSA]

+1 to chronograph.

[LAalex]

1.  Daystate Huntsman .22

2.  Mac1 Steroid Blue Streak

3. Beeman R1 Carbine  .20

4.  HW77  .177

5.  Diana 460  .22

6.  I could probably go all the way up into the 50's

Scotty

[silent_airman]

A gun that you don't have to pump, use CO2, does not need HPA, has no springs or pistons. Shoots dime sized groups out to 100 yards. Is not hold sensitive and cleans and lubes itself. Has a scope that never needs to be aligned. Has a beautiful metal and wood finish, and best of all is free! (Tooth Fairy, Santa Claus, and Fairy Godmother, please take note) In short, Super Airgun!

My second choice would be a Drozd Blackbird.

I'd settle for an Umarex EBOS

I'd probably accept another Steel Storm.

I'll actually end up with a tin of pellets.

[Gertrude]

A gun that you don't have to pump, use CO2, does not need HPA, has no springs or pistons. Shoots dime sized groups out to 100 yards. Is not hold sensitive and cleans and lubes itself. Has a scope that never needs to be aligned. Has a beautiful metal and wood finish, and best of all is free! (Tooth Fairy, Santa Claus, and Fairy Godmother, please take note) In short, Super Airgun!

I think you left out the "and has 783 FPE using WallyWorld CPHP's in a tin, no sorting, no washing" ;-)

[YEMX]

I'll add one more DREAM gun to my list:

Uses a form of air cartridges that is no bigger than 45-70 cartridge, is .25 and/or .30 caliber, has minute of squirrel accuracy, and looks like a 1874 Sharps rifle...

projectile area of the cartridge is sized for either pellets, or boolits
has a TJ barrel liner with octagonal outer barrel
barrels can be changed out depending on caliber, and type of projectile
has 4 standard barrels- 2 in .25, 2 in .30- pellet or boolit
power is regulated by how much pressure you put in the air cartridge
the rifle is made so that any sights that a Sharps rifle can use, the air rifle can use
double set-triggers (of course!!)

I think that right there is THE dream rifle for me!!!

[triggerfest]

A long healthy life with a lot of shooting hours....

Which, btw, can be accompanied with a nice AA TX200 HC .177 

[Genolution]

MAX-ML .45 cal BullPup

I had thought about getting one in .25 cal but just couldn't get enough info on them. All the critical review coverage is on the semi auto version and the .357. I see you have a few evanix rifles. What kind of accuracy and shot count would you expect from a tuned .25 ml?

[ancient1one]

I've been reading up on those cz's. If I was sure I could get 25-30 fpe from one with readily available parts I may have to update my wishlist lol

Check out the Brocock Concept if you like the CZ200 but want 25 fpe. Hard to compare a 15 vs 25 fpe rifle but those Concepts are very accurate. They are made in England, 6 pounds, six shot repeaters with German Weihrauch barrels. I had the last generation Concept and it was as accurate as I could shoot.

Top gun has them on sale for $695. Link:  http://www.topgun-airguns.com/Concept-Elite_p_75.html

[Booger]

I just got this, it is love at first sight.

[Matt15]

A gun that you don't have to pump, use CO2, does not need HPA, has no springs or pistons. Shoots dime sized groups out to 100 yards. Is not hold sensitive and cleans and lubes itself. Has a scope that never needs to be aligned. Has a beautiful metal and wood finish, and best of all is free! (Tooth Fairy, Santa Claus, and Fairy Godmother, please take note) In short, Super Airgun!

I think you left out the "and has 783 FPE using WallyWorld CPHP's in a tin, no sorting, no washing" ;-)

That would be 4968 FPS!!!!!