Author Topic: Millennium Pumper Production - The Beginning - And The Lousy End (Read 294534 times))

CarsonRatSniper · « **Reply #400 on:** February 05, 2015, 12:07:54 PM »

Those are being made next week when the shop is in Millennium mode.

Mike

CarsonRatSniper · « **Reply #401 on:** February 18, 2015, 01:17:28 AM »

Well, I got sick the first day of my vacation last week

Needless to say work on the Millenniums went very slow.

I will have an assembled top end minus CF sleeved barrel in .25 caliber to test tomorrow afternoon and I will add some pics.

Just wanted to update everybody...

Mike

Monkeydad1969 · « **Reply #402 on:** February 18, 2015, 01:29:31 AM »

Quote from: CarsonRatSniper on February 18, 2015, 01:17:28 AM

Well, I got sick the first day of my vacation last week
Needless to say work on the Millenniums went very slow.

I will have an assembled top end minus CF sleeved barrel in .25 caliber to test tomorrow afternoon and I will add some pics.

Just wanted to update everybody...

Mike

There you go, teasing us again. We want pics, We want pics, We want pics, We want pics...lol

Joe

farmerjoe99 · « **Reply #403 on:** February 18, 2015, 09:16:33 AM »

Quote from: CarsonRatSniper on February 18, 2015, 01:17:28 AM

Well, I got sick the first day of my vacation last week
Needless to say work on the Millenniums went very slow.

I will have an assembled top end minus CF sleeved barrel in .25 caliber to test tomorrow afternoon and I will add some pics.

Just wanted to update everybody...

Mike

Sorry to hear that Mike hope your feeling better,
its been going around up here...
Thanks for the update.
Joseph

LEE IN VA. · « **Reply #404 on:** February 18, 2015, 10:38:05 AM »

Mike I know this is off topic but what ever became of the .25 RAW you were getting back in the fall?

Hanabata808 · « **Reply #405 on:** February 18, 2015, 01:53:06 PM »

Hope you're feeling better Mike.

CarsonRatSniper · « **Reply #406 on:** February 18, 2015, 03:30:37 PM »

Thanks Guys

Its just a cold and I'm pretty much over it...first time I've gotten sick in over 2 years!

Lee, I cancelled my RAW order - I wanted to be able to buy one of my own rifles! Just because you're the one making them doesn't mean they're free!

Mike

CarsonRatSniper · « **Reply #407 on:** February 18, 2015, 06:41:47 PM »

These are just mock ups but you can see where this is going

Standard

Full shroud

rsterne · « **Reply #408 on:** February 18, 2015, 07:18:02 PM »

Lookin' nice !!!

Bob

YEMX · « **Reply #409 on:** February 18, 2015, 08:07:42 PM »

Yes, looking nice indeed!!

cnjl3 · « **Reply #410 on:** February 19, 2015, 12:06:07 AM »

Wow! That sure looks sweet.
I was looking at your post where you say that it is no problem for you to pump it up and in the picture you show the action with no scope. In today's picture you show it with a scope and I get the feeling that the scope will get in the way of pumping. I have a Steroid Silver Streak and pumping past 9 pumps up to 14 pumps is quite a surprise. I am in process of finding/getting myself an Intregrabase scout mount that will allow me to use a pistol scope mounted away from the area that you would normally hold while pumping. Have you pumped the Millennium with a scope? Of course I'm talking about the final pumps. Do you foresee any problems to the scope or action by holding the scope while you pump? Because the stock looks a little thin to be holding it by grip while pumping.

rsterne · « **Reply #411 on:** February 19, 2015, 12:23:22 AM »

I pumped mine with my hand right across the turret area on the scope spreading the load to the rings.... no problem, and relatively comfortable to hold that way....

Bob

CarsonRatSniper · « **Reply #412 on:** February 19, 2015, 12:41:31 AM »

That scope is just a Bug Buster held in place by Jim just for looks - I plan in mounting a full sized scope on mine so I can hold it like Bob described.
I only pumped it without a pump handle on the lever and I had no issues pumping to 1800 psi.

We haven't finalized the dimensions of the breech band so the stock has not yet been inletted for the band.

I will be able to answer any questions about pump difficulty with the handle once its all together.

Mike

tkerrigan · « **Reply #413 on:** February 19, 2015, 02:33:04 AM »

If you can sit on a chair or something similar and drop the scope between your spread knees then it's pretty easy to pump, that's the way i do my steroid. Regards, Tom

UCChris · « **Reply #414 on:** February 19, 2015, 09:34:44 AM »

I might have missed it, but what are the plans for a trigger guard?

Norm_m · « **Reply #415 on:** February 19, 2015, 10:12:50 AM »

Chris the trigger guard will be custom made polished aluminum that will look similar to the Gen 1 MRod trigger guard.
I'm finishing up the stocks for the Millennium today and will be making the trigger guards once they are done.
Norm

UCChris · « **Reply #416 on:** February 19, 2015, 10:49:01 AM »

Awesome! Thanks for the quick response! I'm excited to see these finished!

45Bravo · « **Reply #417 on:** February 19, 2015, 12:39:07 PM »

I'm excited to see some numbers come from them.
Real world pumps per shot.

YEMX · « **Reply #418 on:** February 19, 2015, 01:30:24 PM »

^^x2!!!!!!

moorepower · « **Reply #419 on:** February 19, 2015, 06:18:42 PM »

How much is it weighing?

Thank you to our advertisers!

Millennium Pumper Production - *The Beginning* - And The Lousy End

Author Topic: Millennium Pumper Production - *The Beginning* - And The Lousy End (Read 294534 times))

Millennium Pumper Production - The Beginning - And The Lousy End

Author Topic: Millennium Pumper Production - The Beginning - And The Lousy End (Read 294534 times))