Bulk Fill from Scuba Tank Parts

[USAF Vet]

I have a 80 CU FT Aluminum, 3300 PSI scuba tank with universal K adapter on the way.
I just viewed a really good video by MustangMike about bulk filling from a scuba tank.
What will I need to duplicate his bulk fill adapter set up. (gauge, relief valve, etc)?
Thanks

[RatRacer]

One of these, plus a female quick connect :  https://www.pyramydair.com/product/air-venturi-k-valve-pcp-scuba-charging-set?a=2848

Unless you know what parts, rated for proper hpa usage, this is easier and safer than cobbling all the parts yourself to save $30 in the end.

[Tommy]

I use the air venturi and it is great The gague is clear and the bleeder works great Y ou do have to buy the quick connect separate and remember to open your bleed fast or you will lose air
Tommy

[USAF Vet]

I have ordered the recommended Air Venturi scuba charging set and the foster disconnect.
When I assemble everything, what should I use to seal the connections? Yellow teflon tape, pipe dope, other?

[RatRacer]

I use standard teflon tape from Ace.

[T1jetmech]

I got my fill block on eBay.  G7 fill block and whip for $24. Works great.

[silent_airman]

I have a 80 CU FT Aluminum, 3300 PSI scuba tank with universal K adapter on the way.
I just viewed a really good video by MustangMike about bulk filling from a scuba tank.
What will I need to duplicate his bulk fill adapter set up. (gauge, relief valve, etc)?
Thanks

Do you have a link to that video?

[USAF Vet]

Do you have a link to that video?

Here it is.
http://www.gatewaytoairguns.org/GTA/index.php?topic=34730.0

[silent_airman]

He's talking about SCBA, and you are talking about SCUBA. Am I right? How does this video apply? I thought the two were different beasts. One far more expensive than the other.