Breech design

[David.Soliman]

I would love to hear your input on this one, I tried to make it as adjustable as I can. The idea was inspired by an Edgun semi-auto kit that Edward never put into production. I made a few changes to Edward's design, first of all he has a safety mechanism that disengages the magazine indexing lever when the bolt is pulled back to prevent double loading, I don't have that (but did account for it if I ever wanted to have one), instead in my design you can rotate the bolt 90 degrees and the mechanism works as a bolt action repeater, you only pull to cock and let it go and the bolt locks in place. Honestly this bolt action conversion is more of a safety net, so that if the semi-auto mechanism doesn't perform as I want I can always change to a more traditional functional mechanism.







I'm new to AutoCAD and this took me two weeks to make.

I still need to work on a sear-disconnect mechanism so that the gun would work as a semi-auto not full auto.

P.S. I'm building the gun from scratch and I have never owned or seen an Edgun, so you will have to be very patient if you want to see this come to life.

[renowntwo]

Can't want to see it come to life.

[David.Soliman]

PCP design:


There is a slight possibility that I have gone a bit overboard with this.

But hey I built in an adjustable scope rail.