Thank you to our advertisers!
Peep sight on IZH61?
Select Gate
READ GTA FORUM RULES BEFORE POSTING
Welcome New Members
GTA Forum Help Desk
GTA Announcement Gate
Airgun Legislation Actions/Information
Boss's Corner
Dealer Area
GRiP "Gateway to Airguns Review Program"
Airgun Repository of Knowledge
Airgun Content Creator Videos
Airgun Event Videos
Air Arms Airguns
AirForce Airguns
Air Venturi Airguns
Artemis/SPA Airguns
Barra Airguns
Beeman Airguns
Benjamin Airguns
Cometa Airguns
Crosman Airguns
Daisy Airguns
Daystate Airguns
Diana Airguns
Evanix Airguns
FX Airguns
Feinwerkbau
Gamo Airguns
Hatsan Airguns
JTS Airguns
Macavity Arms Airguns
Pinty Airguns
Umarex Airguns
Vintage Air Gun Gate
Weihrauch Airguns
Support Equipment For PCP/HPA/CO2
All Air Gun Accessories Gate
3D printing and files
Optics, Range estimation & related subjects
Scopes And Optics Gate
Tuners
In Memoriam
Air Gun Gate
BB Guns and Such
"Bob and Lloyds Workshop"
American/U.S. Air Gun Gates
European/Asian Air Gun Gates
PCP/CO2/HPA Air Gun Gates "The Darkside"
Projectiles
Air Archery
Air Guns And Related Accessories Review Gates
Hunting Gate
Machine Shop Talk & AG Parts Machining
***Pay It Forward***
Buyer's, Seller's & Trader's Comments
Bargain Gate
Back Room
Member Classifieds Gate
Hobbyist Classifieds Gate
Target Shooting Discussion Gate
Target Match Rules
Shooting Match Gates
Field Target Gates
The Long Range Club
100 Yard Match
Discussions By States
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
About
Help
Old GTA
Gallery
Search
Stats
Login
Register
Advertise Here
GTA
»
All Springer/NP/PCP Air Gun Discussion General
»
Air Gun Gate
(Moderators:
dk1677
,
GTA-Airgunner
,
Tater
) »
Peep sight on IZH61?
« previous
next »
Print
Pages: [
1
]
Go Down
Share This!
Author
Topic: Peep sight on IZH61? (Read 1597 times))
popadave
Guest
Peep sight on IZH61?
«
on:
July 23, 2010, 10:30:42 AM »
I am thinking of trying this since I shoot better with a peep sight.
I've tried scoping this (yes I can get a scope on the short rail if I put both rings on the same side of the turret) BUT there is a definite rear-ward up slope on the place where the scope attaches. It is no where near parallel to the barrel. Thus I cannot get a scope to adjust high enough. I run out out of adjustment in the scope even with shimming the front ring up and the rear ring down! I do not think the plastic can be bent down enough to be parallel or even have a moderate droop. Besides the cocking rod is inside of it and that would have to bend too.
A red dot scope, two different ones have been tried, also cannot be brought into proper adjustment because of this slope.
Ditto with a laser. The high one, made by Crosman, actually lights the top of the front sight even with max upward adjustment.
So, do any of you think a Williams Peep FP-AG will work? If not I can always use it on another rifle. But it seems rather strange to put a $70++ sight on a $109 +/- air rifle. Maybe the Mendoza which is back in stock at PA would work and not be as pricey at @29.99.
What do you think?
Logged
ac12
GTA Senior Contributor
Posts: 2333
Re: Peep sight on IZH61?
«
Reply #1 on:
July 23, 2010, 12:28:14 PM »
Sounds like you have a rifle w a bad receiver.
I have an old Tasco red-dot on my 60, and it works just fine.
I think the peep would work.
About the price of sights....I have a set of Gamo diopters on my Daisy 953 that cost more than the rifle.
Logged
San Francisco Bay Area, California, USA
10 meter target Air Pistol and Air Rifle
daved
Guest
Re: Peep sight on IZH61?
«
Reply #2 on:
July 24, 2010, 11:06:13 AM »
I had a Daisy Avanti diopter on my 61, worked great once I modified the front sight. The stock post didn't work very well, but I turned it into a poor mans aperture with some fine wire. Didn't think much of the Avanti sight, but maybe I had a bad one. Lots of back lash, and stiff operation in part of it's adjustment range. The diopter sight from the target model QB 78 is better, and frequently shows up on the Classifieds. Posting a WTB ad will probably net you several. Both of these retail for around $70 IIRC.
For about twice the money, the Air Force diopter is a great piece. Solid, well built, VERY precise adjustments, and the eye piece has the same thread as the high end match sights, so you could upgrade later if you wanted to. LOTS of vertical adjustment, and you can even remove the sight from its mounting bracket and install it using a standard 1" scope ring. BTW, I'm talking about just the rear sight here, I didn't like the matching AF front sight. Yeah, it's more expensive than the rifle, but I have scopes that cost as much or more than the rifles they're on, and not a Leupold in the bunch :-).
And it just occurred to me that I'm talking match style diopters and you were asking about peep sights. I had one of the Mendoza sights for a short time, nice piece but not suitable for my application, so I sold it. I've heard of people having issues with it not being able to go low enough. Not sure if it would work on a 61 or not. I was using mine at ranges of 20 yards or less, mostly 10M indoors, so the diopter was the way to go, much more precise than a peep. Hope that helps.
Dave
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
GTA
»
All Springer/NP/PCP Air Gun Discussion General
»
Air Gun Gate
(Moderators:
dk1677
,
GTA-Airgunner
,
Tater
) »
Peep sight on IZH61?