Webly Raider or any other serious multi pumps ?

[Wolfdog91]

I'm a multi pump shooter and I'm on a mission to try and find some serious multi pump air rifles ( I love my 880,2100,1322/77 M4-177 but I wanna up grade ) But so far it's not been easy it's all springers and PCP's  Any how I've Recently heard of the Webly Raider look awesome but apparently it's got some seal problems and its hard to pump ( Reminded  me of the Sheridans  ) . Is this a good rifle and are their any others out their I figured Industry would have something any advice/suggestions would be nice!
Thanks

[AK73]

What about a 397, Blue Streak or a 392? Of course you could always get a 2289 and mod it a whole bunch.

[Big Bore Bart]

     Older Crosman 1400/140 series,  S&W 77A,   The only Chinese pumper I know about is the Webley Rebel.     Or you could just build yourself one.   

[darren]

google mr sterne"s    "uber pumper" and then bulid one.......I may try

[bgmcgee]

I say keep your eye out for an older Sheridan .20 cal. Can't go wrong with one of those.

[Wolfdog91]

What about a 397, Blue Streak or a 392? Of course you could always get a 2289 and mod it a whole bunch.

A'm saying it looks to me like a modded blue streak with a synthetic stock 

[Wolfdog91]

google mr sterne"s    "uber pumper" and then bulid one.......I may try

Are you taking about this  http://www.americanairgunhunter.com/quigley.html because the first coulpe of sites that came up were well...........

[D14Jeff]

these are beautiful !





http://www.airgunspecialist.com/index.html

[RatRacer]

google mr sterne"s    "uber pumper" and then bulid one.......I may try

Are you taking about this  http://www.americanairgunhunter.com/quigley.html because the first coulpe of sites that came up were well...........

No, here: http://www.gatewaytoairguns.org/GTA/index.php?topic=39328

[Wolfdog91]

google mr sterne"s    "uber pumper" and then bulid one.......I may try

Are you taking about this  http://www.americanairgunhunter.com/quigley.html because the first coulpe of sites that came up were well...........

O that yes i do recall readin some of that but didn't think much of it at the time I realy like the concept but Ill probably go crazier than I am now trying to build it !  


No, here: http://www.gatewaytoairguns.org/GTA/index.php?topic=39328

[Wolfdog91]

these are beautiful !





http://www.airgunspecialist.com/index.html

WOW those are way to nice for me ! they'ed have scratches all over them after an hour with me 

[eeler1]

Yeah, I'd go for a used Benji 34x or 39x or the Sheridan streak.  Lots of used ones around, not too expensive. 

[DavidS]

I have shot some of the "High end" pumpers and really was not impressed at all.  If you take a 2289g, make an aluminum adjustable cup piston (that uses the original cup seal), shape the valve assy face to match the inside of the cup seal, put a shim around the valve in front of the O-Ring to take up the dead space between the O-Ring and the valve face, insert a shim in the front of the check to take most of the dead space in the inlet port, and angle and widen the exaust port, make a slightly larger transfer port, you end up spending about $90 including the gun and you have a gun that can pretty well keep up with the high end pumpers, is a lot easier to work on, and is a lot more accurate.


Though that is just my $0.02 worth.

[Gunut]

How about the FX Indy?
http://www.fxairguns.com/rifle/the-indy/



looks pretty trick.