Crosman Side Wheels?

[Oldgringo]

Does anyone know if the $10 Crosman side wheels will fit the Hawke Side adjustment scopes?

[Motorhead]

In all likelihood ... NO

With some adaptation, likely could get jury rigged to however 

[Oldgringo]

RATS!  My second Hawke SF arrived from Buds Saturday.  I keep looking and hoping someone will come up with a cheap DIY or something.

[Oldgringo]

Thanks, John.  That's pretty impressive work by JeffA. 

BTW, if money wasn't a concern, I would have got the big side wheel model to start with.

[Motorhead]

Some of us are fabricating our own .... this one with a Lathe spun hub ... and Wheel. 
Hub aluminum, Wheel Poly.

[Oldgringo]

Some of us are fabricating our own .... this one with a Lathe spun hub ... and Wheel. 
Hub aluminum, Wheel Poly.

*sigh*

[Motorhead]

Ok,
Let's see what we can do in helping

WHAT model Hawke you wanting to fit on ?
Wanting 4-5-6" inch wheel ?

[Oldgringo]

Ok,
Let's see what we can do in helping

WHAT model Hawke you wanting to fit on ?
Wanting 4-5-6" inch wheel ?

Scott,

I have two Hawke SF scopes:

1. Varmint  3-12
2. Varmint  4-16

Truthfully, all my shooting is done off a rest at fixed targets at fixed distances; ergo, range is seldom varied.  I just think the side wheels look cool.

Thanks,

Greg

[ezman604]

Scott makes some purdy stuff. Some of us others try to too. Still trying to figure out HOW to make those with the lathe instead of the mill.

http://www.gatewaytoairguns.org/GTA/index.php?topic=54137.0

[Motorhead]

Ok,
Let's see what we can do in helping

WHAT model Hawke you wanting to fit on ?
Wanting 4-5-6" inch wheel ?

Scott,

I have two Hawke SF scopes:

1. Varmint  3-12
2. Varmint  4-16

Truthfully, all my shooting is done off a rest at fixed targets at fixed distances; ergo, range is seldom varied.  I just think the side wheels look cool.

Thanks,

Greg

Greg,
Those scopes use the same knob diameter as the Night Eye .... You can adapt the newest 5 spoke UTG 80 mm with an adapter ring replacing the rubber one provided.  Or get an older 4 spoke 80 or 100 mm and get it bored out slightly to fit knob.

If you get a UTG wheel, LMK & will do the machine work to get it fitted.  Just cover the postage & we're good to go 

[Oldgringo]

Thanks guys, but I'll just do without....FTTB.

[Duckfish]

Hey Scott, the R10 is doing well, thanks for the service on it.  I have a Nikko Sterling targetmaster on the way, can we talk about a side wheel for that?

Duckfish (aka Ed)

[Dockey 454]

I was having the same problem with the varmint on my sons S200. So don't laugh I did this with woodworking machinery. This is what I came up with. Center is made of HDPE, with a 4" aluminum ring around the outside.
    Tom