Got the earwax out, now no second stage.....fixed

[Duckfish]

Well, I got the earwax out of the Rekord,and I adjusted for a nice crisp second stage.    I was very happy to see that after I cleaned the trigger the safety started to work, never did before, nice.  Went to the range to sight in, I was happily shooting away having a good time BSing with Ike.  Then the safety stopped working again, except this time in the on position.   

Well long story short I drove home, got the TX, went back to the range and moved the Hawke back to the  TX.  Got it sighted in for the next shoot. 

Got the R10 home and took the stock off and blasted the trigger with a degreaser.  Still nothing, tapped the safety with a small knock and the gun went off, scared the bejesus out of me.  Recocked and when I pushed the safety off it went off again. 

I have adjusted second stage trigger ( screwed in) some it now does not go off when safety is released but has no second stage.

Help?

Duck

[Mark 611]

what screw did you adjust?

[Duckfish]

Hey Mark, thanks, I adjusted the little one in front of the trigger, it takes a bitty torx, and you have to remove the trigger guard to get to it.

[Motorhead]

Hey Mark, thanks, I adjusted the little one in front of the trigger, it takes a bitty torx, and you have to remove the trigger guard to get to it.

That's the SEAR Engagement ... adjustments there are VERY SMALL !!!

[Duckfish]

Hi Scott, Right now it has no second stage just a fast first stage.  I think I should continue to tighten the bitty torx.  When I got it it had no second stage,  I took the trigger guard off and the torx screw had fallen out and luckily was caught by the trigger guard, I put it in and adjusted to a nice crisp 2nd stage, the screw was loose so applied a little blue loctite.  It stayed put, but I must have gotten some on some where else cause it had a gritty 1st stage,  I wanted to fix that and that is what started this whole thing.  Ugh

[Motorhead]

you working with a New or Used gun ?

If someone has excessively bent the metal tab forward of the trigger blade pivot, that would shorten the 1st stage pull distance.
bent too far & it eats into 2nd stage and could make for a situation you describe

[Mark 611]

I agree you need to look at the unit Scott is right!

[darren]

hey duck....

I think you might want to take that gun to enabler #2 (scott) if for nothing else a good days shooting could occur; besides it isn't like it is a bad drive, grab momma duck and tell her you are taking her to apple hill.......

[Duckfish]

Fixed, I was turning screw the wrong way, 

Duck

[Motorhead]

Experience is ...... Not getting what you wanted    Now you got experience 

[palonej]

The duck was using the wrong fin!!!!
Glad you got it straightened out bro!

[Duckfish]

Had some feathers in my ears or something.

[Sfttailrdr46]

  That is exactly why I don't mess with my trigger unless it totally stinks up my grouping. MY 54 has the 01 trigger a little harder second stage than the 460 with 06 trigger just remember to not have a heavy finger on the 460