Author Topic: Short Final Take on TitanGP .22 From Wallly World Tune (Read 8484 times))

gene_sc · « **on:** November 20, 2010, 07:22:49 PM »

Well the Titan GP is done and it is a bit different than the original Titan GP I purchased from Wally World a couple months back.

Here is a list of mods etc. Done to her.

1. CDT GRT-III Trigger installed and adjusted.

2. New Custom brass washers made for breech pivot

3. New NP - GRS Kit installed.

4. New shroud custom built for Titan Barrel

This gun is going up for sale as soon as I clean her up.

5. A complete Tune from front to back.

6. Replaced wood thumbhole stock with synthetic panther stock.

Run over 150 Gamo 14.5 gn pellets through her before the chrony testing.

Chrony resutls and trigger pull weight follows.

Very smooth cocking and shooting cycle.

Cooney · « **Reply #1 on:** November 20, 2010, 07:51:40 PM »

Very nice Gene, maybe when this one comes up for sale and if I have the funds i'll try to get it. Gene would that same stock fit my trail NP XL1100 and if so how much would it coast? Thanks.....

shadow · « **Reply #2 on:** November 20, 2010, 08:02:11 PM »

She turned out great bro and sure she's a dream to shoot. Those numbers look great and plenty for the hunters out there. Ed

Rocker1 · « **Reply #3 on:** November 20, 2010, 08:06:27 PM »

wow boss that looks great some one will get a deal, and jerry c nope that stock will not work on a xl but it will work on the titans and the nps thanks David

Cooney · « **Reply #4 on:** November 20, 2010, 08:21:26 PM »

Thanks Rocker1 that's a bummer, can you tell me any that will work....thanks...

dk1677 · « **Reply #5 on:** November 20, 2010, 10:56:09 PM »

Nice work there Gene!

Alan · « **Reply #6 on:** November 20, 2010, 11:05:07 PM »

Very nice! Let the bidding wars begin.

airiscool · « **Reply #7 on:** November 21, 2010, 09:30:52 AM »

Very impressive Gene. Someone is going to a happy shooter !!!!

Paul

ray1377 · « **Reply #8 on:** January 03, 2011, 01:29:46 PM »

Man that is one sweet piece!!
Custom from the word go.
I like it.
Thanks
Ray

R.J.9 · « **Reply #9 on:** May 01, 2011, 02:15:34 PM »

How much are you looking for it.

Aaron

Brewerja · « **Reply #10 on:** July 08, 2011, 01:43:56 AM »

GENE! I think many of us may be interested in what, how and where; for parts on that barrel shroud. I have a spare shroud for my npxl, but quickly noticed the titans lack of threaded barrel. So only 2 of the 3 shroud parts would fit. whats your secret boss?!! =)

Korak-again · « **Reply #11 on:** July 08, 2011, 10:36:15 PM »

Nice rig Gene.
Did you mean Phantom stock? If it is a Phantom stock and the Titan fits, will the gas ram fit in the Phantom reciever?

pepegraves · « **Reply #12 on:** November 27, 2014, 07:18:20 AM »

I am interested in a Titan but, I don't see the pre-tune chrony numbers...maybe I missed where you put them.

lillysdad621 · « **Reply #13 on:** November 27, 2014, 09:22:40 AM »

Darrell... look at the pics... there is a velocity chart there.

Novagun · « **Reply #14 on:** November 28, 2014, 01:45:50 PM »

Let me say first up that I do not want to decry the skill and effort put into this gun.
Could you please give an indication of the purchase cost of the rifle and the cost of the extra bits that have been included in the remake? Then of course there is the time at some dollars per hour for labour; or perhaps that should be counted as zero just for the love of doing it.
My point is that for many people a project like that indicates that they bought the wrong gun in the first place and would have been better off buying a Diana or a Weihrauch or something else.

gene_sc · « **Reply #15 on:** November 28, 2014, 07:01:48 PM »

Dear Sir, once upon a time, I designed and developed parts for air rifles to enhance and increase the overall cocking and shooting cycles. It was done out of pure pleasure of the sport/hobby and to find he best performance possible out of each and every air rifle I worked on. The development and design of he CNC Gas strut bushing and CNC Brass stabilizing pivot washers come from my pocket and later on sold at a fair market price plus shipping to USA only. I no longer make the Delrin Gas Strut bushing but still have access to the CNC Brass pivot washers.

You may enquire pricing structure at: cdt@airguntoys.com plus shipping.

Hope this answers your questions.

Gene Curtis

MicErs · « **Reply #16 on:** November 28, 2014, 08:03:08 PM »

Quote from: lillysdad621 on November 27, 2014, 09:22:40 AM

Darrell... look at the pics... there is a velocity chart there.

He asked for pre-tune numbers. Likely they can be found somewhere else but rifles vary...

gene_sc · « **Reply #17 on:** November 29, 2014, 10:35:44 AM »

On some tunes it is impossible to set a pre tune due to air rifle condition or damage.

Gene

Quote from: MicErs on November 28, 2014, 08:03:08 PM

Quote from: lillysdad621 on November 27, 2014, 09:22:40 AM
Darrell... look at the pics... there is a velocity chart there.
He asked for pre-tune numbers. Likely they can be found somewhere else but rifles vary...

MicErs · « **Reply #18 on:** November 29, 2014, 11:32:38 PM »

Quote from: gene_sc on November 29, 2014, 10:35:44 AM

On some tunes it is impossible to set a pre tune due to air rifle condition or damage.

Gene

Quote from: MicErs on November 28, 2014, 08:03:08 PM
Quote from: lillysdad621 on November 27, 2014, 09:22:40 AM
Darrell... look at the pics... there is a velocity chart there.
He asked for pre-tune numbers. Likely they can be found somewhere else but rifles vary...

Ayup. My D48 had a broken spring when I shipped it to you. It came back shooting pellet on pellet, thank you very much.

The numbers are likely available if he searches the web. Surely that will be close enough.

Thank you to our advertisers!

Short Final Take on TitanGP .22 From Wallly World Tune

Author Topic: Short Final Take on TitanGP .22 From Wallly World Tune (Read 8484 times))

Cooney

Cooney

Alan

airiscool

ray1377

R.J.9