HATSAN PARTS

[prodigalSON]

I know Hatsan doesn't offer any parts but could anyone give me some info on any source for parts that will fit the 125th? Is there any source for a higher performance springs?

[Paul68]

JM's turkish seal fits the 125.

The Vortek 142 wire spring is the right wire diameter and can be cut to suit, just not sure about the inner and outter diams. I have one, but it is installed in rifle currently so I can't check it easily. I THINK it will fit.

[prodigalSON]

Thank you, awesome stuff. What about the 148 wire? Could you use it?

[SpringerMan]

I know Hatsan doesn't offer any parts but could anyone give me some info on any source for parts that will fit the 125th? Is there any source for a higher performance springs?

Check with WHITEFANG. He can tell you all about that !

[Mpac]

Thank you, awesome stuff. What about the 148 wire? Could you use it?

You will have to bore out the inner piston for the .148 wire to work if not the expansion of the spring when cocking will make it very tough to cock if it even will.The .142 wire is a perfect fit as is.If you need a spring when it comes to it before hatsan has one for puschase get one for the walther falcon hunter .142 wire from umarexusa and tell them that's what it's for the wfh. It's working in mine already have at least 1k+ rounds thru it .

[Paul68]

The 148 wire is a monster pure and simple. I still can't for the life of me even figure what gun a person could possibly use it in successfuly without some issues.   

The Hatsan spring is .142 wire diameter, .748 outer diameter, .465 inner diameter, 48 coils

The Vortek .142 spring is obviously .142 wire diameter, and .830 outer diameter.

The Vortek 148 spring is, .860 OD .560 ID, .148" Wire Diameter.

Much depends on the inner diameter of the piston. It is well larger than the stock spring, but if it will accomodate the Vortek springs I couldn't say. I CAN say that the larger springs fit in my XS28, and that the piston in that gun is smaller, so I ASSUME they would fit within the Hatsan piston. Mpac just hit another important point, spring expansion can be a problem.

The guide is a whole nother story, BUT, the Hatsan guide is nothing special and shouldnt be any more difficult to fabricate than any other.