Targets for 5 1/2" Square Traps

[Random Plinker]

My painted plywood silent pellet trap box has a 5.5" square slotted opening to take "drop in" 5.5" Gamo targets, like most small cone traps.

I've attached targets I made for this trap, which others with similar traps may find useful.  The flippable targets have four targets per 8.5"x11" sheet.  The sheet is designed to be cut down the middle to provide two 5 1/2" wide double targets. Each of the two targets on the half sheets is positioned to center within the 5.5" pellet trap opening, so that the half sheet can be flipped around after shooting one of the two half sheet targets, thus centering the second half sheet target in the pellet trap opening.

The targets are:
1) A flippable 10 meter air pistol target, scaled for 5 meters and 4.5mm (177) pellets
2) A flippable 10 meter air rifle target with 5 targets for 4.5mm (177) pellets
3) A flippable "Shooting match" "Gamo" target with 5 centers

I've also attached a picture showing a flippable target in the trap.

Enjoy!

Edited to update targets

[Random Plinker]

Original post updated to add a Gamo target.

Would it be acceptable to post match entries using the appropriate number of my targets designed for 5.5" pellet traps?  I don't have a pellet trap big enough to take a full 8.5"x11" target sheet with 5 Gamo target centers on it. 

[Big_Bill]

If that's what you have to do to compete Random Plinker,

Go  for it !  I don't see a real problem doing it that way if you have too

Bill