Thank you to our advertisers!
Collor on barrel of Marauder
Select Gate
READ GTA FORUM RULES BEFORE POSTING
Welcome New Members
GTA Forum Help Desk
GTA Announcement Gate
Airgun Legislation Actions/Information
Boss's Corner
Dealer Area
GRiP "Gateway to Airguns Review Program"
Airgun Repository of Knowledge
Airgun Content Creator Videos
Airgun Event Videos
Air Arms Airguns
AirForce Airguns
Air Venturi Airguns
Artemis/SPA Airguns
Barra Airguns
Beeman Airguns
Benjamin Airguns
Cometa Airguns
Crosman Airguns
Daisy Airguns
Daystate Airguns
Diana Airguns
Evanix Airguns
FX Airguns
Feinwerkbau
Gamo Airguns
Hatsan Airguns
JTS Airguns
Macavity Arms Airguns
Pinty Airguns
Umarex Airguns
Vintage Air Gun Gate
Weihrauch Airguns
Support Equipment For PCP/HPA/CO2
All Air Gun Accessories Gate
3D printing and files
Optics, Range estimation & related subjects
Scopes And Optics Gate
Tuners
In Memoriam
Air Gun Gate
BB Guns and Such
"Bob and Lloyds Workshop"
American/U.S. Air Gun Gates
European/Asian Air Gun Gates
PCP/CO2/HPA Air Gun Gates "The Darkside"
Projectiles
Air Archery
Air Guns And Related Accessories Review Gates
Hunting Gate
Machine Shop Talk & AG Parts Machining
***Pay It Forward***
Buyer's, Seller's & Trader's Comments
Bargain Gate
Back Room
Member Classifieds Gate
Hobbyist Classifieds Gate
Target Shooting Discussion Gate
Target Match Rules
Shooting Match Gates
Field Target Gates
The Long Range Club
100 Yard Match
Discussions By States
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
About
Help
Old GTA
Gallery
Search
Stats
Login
Register
Advertise Here
GTA
»
All Springer/NP/PCP Air Gun Discussion General
»
PCP/CO2/HPA Air Gun Gates "The Darkside"
(Moderators:
Rocker1
,
only1harry
,
splitbeing
) »
Collor on barrel of Marauder
« previous
next »
Print
Pages: [
1
]
Go Down
Share This!
Author
Topic: Collor on barrel of Marauder (Read 1182 times))
EJB
Marksman
Posts: 376
He hunts in my back yard.
Collor on barrel of Marauder
«
on:
December 15, 2012, 09:25:47 PM »
After reading that the barrel should be centered in the collor and free floating I got to looking at my Marauder. The Barrel is centered in the collor but it is resting on the bottom of the collar. Should it be shimmed to be centered or left to rest on thew bottom of the collar? The set screws do nothing to rectify the situation.
Logged
Iowa
Crosman Challenger CH2009
SRod .177 (Amy)
Benjamin Marauder .177 Lovable
Rws 350 Mag, (Greta) .177
Benjamin Trail NP XL 1500, (Angle)
Browning 800 Mag, (Achmed) .177
QB78 .177
IZH 60 .177
Daisy Powerline 889 .177
Daist Powerline 880 .177
Crossman 1008 .177
Hy Score 815 .177
PakProtector
GTA Senior Contributor
Posts: 2884
yes
Real Name: Douglas
Re: Collor on barrel of Marauder
«
Reply #1 on:
December 17, 2012, 12:58:35 PM »
I assume you mean the thing at the fill-plug end of the air tank. My 22 cal sits low, and if I don't have the breech screws properly tightened it just rests on the bottom. Try removing the bolt( need to to access the rear breech screw) and check that the breech is properly clamped to the air tube. While you have it off, remove the transfer sleeve and its o-rings from the breech and check to be sure the barrel is clamped properly; it is possible to have it slightly clocked v. the flats provided to run the set screws up against. You'll loosen them and rock the barrel back and forth while slowly tightening them. You'll see the barrel's transfer port slightly off center in the hole in the breech. Rock it as far in both directions, and then put it half way in between and tighten the screws a bit and repeat 'til they're tight and the barrel no longer can be twisted back and forth.
cheers,
Douglas
Logged
Ann Arbor, MI, USA
My most valuable friends are the ones who will tell me I am wrong.
More valuable still are the ones who go to the trouble of making me see it.
mtsheron70
GTA Senior Contributor
Posts: 2997
Re: Collor on barrel of Marauder
«
Reply #2 on:
December 17, 2012, 05:37:11 PM »
A picture would be so helpful.
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
GTA
»
All Springer/NP/PCP Air Gun Discussion General
»
PCP/CO2/HPA Air Gun Gates "The Darkside"
(Moderators:
Rocker1
,
only1harry
,
splitbeing
) »
Collor on barrel of Marauder