2400kt build finally done!

[Onebaddj]

Finally got the scope shimmed and mounted last night and man i am overall pretty happy. It started out as a ccs 2400 kt with 18 in 22 barrel. I added a carbon steel hex bolt kit, mellon air long probe bolt, tko break, hipac with one extention and green hammer spring, utg rail replaced the front hand guard and utg bipod.. the scope is a hawke varmint 2-12 x 44 1/2 mildot reticle. Was a fun build and took about 2 months total of working when i had time. I am still working on a modded valve for it. Playing the spring change game with it. Right now i am getting about 20 shots in the mid 600's with 14.66 gr ftt. At 15 yds every shot was inside a 3/4 in paisty and most were touching. 3/4 at 15 yds aint the best but for initial sightin im happy. The scope is really nice and i like the 1/2 mildot reticle alot. Might get one for the condor in higher mag.  Will post exact numbers when i get back to the house.

[MustangMike]

looking good dude

[PCP-4-ME]

Nice build DJ.
Lots of options with the bottom rail. Very cool jarhead. 

[Onebaddj]

Thanks gents! Bone stock it was 546 avg co2 and 517 with hpa at 1500 psi start and after 623 fps avg hpa with 14.66 gr. The jsb 15.9 are 524 avg co2 503 with hpa and after mods 593 avg hpa. Cant wait to stretch it out a little. Maybe monday. Gotta work this weekend and we are having the Marine Corps ball saturday night! I need to order a tube to test my valves in. The valve ive done all the work to wont close all the way with the spring from my 1377 valve in it and i have to use the heavy hammer spring if i put the stock spring in it to get it to open all the way. The valve has been opened up inside, angled the exit port and opened to 3/16, cut off peircing needle and opened up the inlet. Should be awesome if i ever get it to work right.

[JBird]

Nice gun. Nice mods!

[bradyman1]

Looking very nice. My custom shop 2400kt is really accurate with h&n ftt.

[Backyardsniper1]

Nice setup. What's your fill pressure?
Semper Fi

[1377x]

nice job!
congrats!

[Onebaddj]

Thanks all. My start is 1750-1800 psi. I still need to shoot it alot more to figure out the sweet spot but thats where im starting and ending about 1100.

[Onebaddj]

Thanks all. My start is 1750-1800 psi. I still need to shoot it alot more to figure out the sweet spot but thats where im starting and ending about 1100.

[1377x]

i was reading that the valve wont close with a 1377 valve spring in it.does that mean the spring is to short?
try finding or fitting a washer inside the cap to take up the needed space to close the valve

[MustangMike]

if your trying to limit power to a plinking only level or indoor shooter maybe contacting a few our humble machining guys and see if and what they would charge to make a new transfer port to reduce power

[BmaS]

Semper Fi! & Happy birthday bro!
Good looking carbine